Benutzer-Werkzeuge

Webseiten-Werkzeuge


aos_release_6_aos_release_7_cli_delta

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

Link zu dieser Vergleichsansicht

aos_release_6_aos_release_7_cli_delta [2014/06/18 22:29] (aktuell)
benny angelegt
Zeile 1: Zeile 1:
 +====== AOS Release 6 zu AOS Release 7 CLI Delta ======
 +Mit Einführung von AOS Release 7 wurde die CLI verbessert. Dabei wurde insbesondere auf die Rückmeldungen von Partnern/​Kunden eingangen.
 +
 +  * Verwendung von Port-Ranges
 +  * Einheitliche Verwendung von "​admin-state"​
 +  * "​no"​ ist, wo es sinnvoll ist, zu Beginn der Zeile
 +  * Ab AOS 7.3.1.R01 ist es möglich Kommandos abzukürzen "sh ip int" anstatt "show ip interfaces"​
 +  * Bei Spanning-Tree wird einheitlich "​spantree"​ für alle Kommandos verwendet
 +
 +===== CHASSIS SUPERVISION =====
 +^  6.4.2.R01 Command ​ ^  7.1.1.R01 Command ​ ^
 +|  %%reload [primary | secondary | all] [with-fabric] [in [hours:] minutes | at hour:minute [month day | day month] | cancel]%% ​ |  %%reload [primary | secondary | all] [in [hours:] minutes | at hour:minute [month day | day month] | cancel]%% ​ |
 +|  %%reload working {rollback-timeout minutes | no rollback-timeout} [in [hours:] minutes | at hour:​minute]%% ​ |  %%reload from <​image-dir>​ {rollback-timeout minutes | no rollback-timeout} [redundancy-time <​redundancy-time>​] [in [hours:] minutes | at hour:​minute]%% ​ |
 +|  %%new command%% ​ |  %%issu from <​image-dir>​ redundancy-time <​redundancy-time>​%% ​ |
 +|  %%[configure] copy running-config working%% ​ |  %%removed%% ​ |
 +|  %%[configure] write memory%% ​ |  %%write memory%% ​ |
 +|  %%[configure] write memory flash-synchro%% ​ |  %%write memory flash-synchro%% ​ |
 +|  %%[configure] copy working certified [flash-synchro]%% ​ |  %%copy running certified [flash-synchro] %%  |
 +|  %%[configure] copy certified working%% ​ |  %%copy certified <​image-directory>​ [make-running-directory]%% ​ |
 +|  %%[configure] copy flash-synchro%% ​ |  %%no change%% ​ |
 +|  %%new command%% ​ |  %%modify running-directory <​image-directory>​%% ​ |
 +|  %%takeover [with-fabric]%% ​ |  %%takeover%% ​ |
 +|  %%show running-directory%% ​ |  %%no change%% ​ |
 +|  %%show reload [status | all status]%% ​ |  %%no change%% ​ |
 +|  %%show microcode [issu | working | certified | loaded]%% ​ |  %%show microcode [issu | working | certified | loaded | <​directory>​]%% ​ |
 +|  %%show microcode history [working | certified]%% ​ |  %%removed%% ​ |
 +|  %%system contact text_string%% ​ |  %%no change%% ​ |
 +|  %%system name text_string%% ​ |  %%no change%% ​ |
 +|  %%system location text_string%% ​ |  %%no change%% ​ |
 +|  %%system date [mm/​dd/​yyyy]%% ​ |  %%no change%% ​ |
 +|  %%system time [hh:​mm:​ss]%% ​ |  %%no change%% ​ |
 +|  %%system time-and-date synchro%% ​ |  %%removed%% ​ |
 +|  %%system timezone [timezone_abbrev | offset_value | time_notation]%% ​ |  %%system timezone [timezone_abbrev | time_notation]%% ​ |
 +|  %%system daylight savings time [{enable | disable} | start {week} {day} in {month} at {hh:mm} end {week} {day} in {month} at {hh:mm} [by min]]%% ​ |  %%system daylight-savings-time%% ​ |
 +|  %%reload ni [slot] number%% ​ |  %%reload slot <​number>​%% ​ |
 +|  %%reload pass-through slot-number%% ​ |  %%removed%% ​ |
 +|  %%power ni [slot] slot-number%% ​ |  %%power slot <​slot[-slot]>​%% ​ |
 +|  %%no power ni [slot] slot-number%% ​ |  %%no power slot <​slot[-slot]>​%% ​ |
 +|  %%temp-threshold temp slot slot-number%% ​ |  %%no change%% ​ |
 +|  %%new command%% ​ |  %%[no] powersupply enable [<​psu-id>​]%% ​ |
 +|  %%rcp rem-slot:​[path/​]src_filename [path/​]dst_filename%% ​ |  %%no change%% ​ |
 +|  %%rdf%% ​ |  %%rdf [slot-nr]%% ​ |
 +|  %%rls <​string>​ [<​string>​]%% ​ |  %%rls rem-slot <​path>​ [<​filename>​]%% ​ |
 +|  %%rrm <​string>​ <​string>​%% ​ |  %%rrm rem-slot <​[path/​]filename>​%% ​ |
 +|  %%stack set slot slot-number saved-slot saved-slot-number [reload]%% ​ |  %%no change%% ​ |
 +|  %%stack clear slot slot-number%% ​ |  %%no change%% ​ |
 +|  %%show system%% ​ |  %%no change%% ​ |
 +|  %%show hardware info%% ​ |  %%show hardware-info%% ​ |
 +|  %%show chassis [number]%% ​ |  %%no change%% ​ |
 +|  %%show cmm [number]%% ​ |  %%show cmm [<​number>​ | <​cmm_letter>​]%% ​ |
 +|  %%show ni [number]%% ​ |  %%show slot [<​slot-nr>​] %%  |
 +|  %%new command%% ​ |  %%show transceivers [slot <​slot-nr>​ [transceiver <​transceiver_num>​]] %%  |
 +|  %%show module [number]%% ​ |  %%show module[<​number>​ | <​cmm_letter>​]%% ​ |
 +|  %%show module long [number]%% ​ |  %%show module long [<​number>​ | <​cmm_letter>​]%% ​ |
 +|  %%show module status [number]%% ​ |  %%show module status [<​number>​ | <​cmm_letter>​]%% ​ |
 +|  %%show power [supply] [number]%% ​ |  %%show powersupply [<​number>​]%% ​ |
 +|  %%show fan [number]%% ​ |  %%no change%% ​ |
 +|  %%new command%% ​ |  %%show fantray [<​fantray-nr>​] %%  |
 +|  %%show temperature [number]%% ​ |  %%show temperature [fabric [<​index>​] | slot [<​index>​] | fantray [<​index>​] | cmm [<​index>​ | <​cmm_letter>​]]%% ​ |
 +|  %%show stack topology [slot-number]%% ​ |  %%removed: not supported%% ​ |
 +|  %%show stack status%% ​ |  %%removed: not supported%% ​ |
 +|  %%hash-control brief%% ​ |  %%moved to CapMan%% ​ |
 +|  %%hash-control extended [[no] udp-tcp-port]%% ​ |  %%moved to CapMan%% ​ |
 +|  %%show hash-control%% ​ |  %%moved to CapMan%% ​ |
 +|  %%new command%% ​ |  %%show escalation-strategy [<​slot-id>​]%% ​ |
 +|  %%license apply%% ​ |  %%removed: not supported%% ​ |
 +|  %%show license info%% ​ |  %%removed: not supported%% ​ |
 +|  %%show license file%% ​ |  %%removed: not supported%% ​ |
 +|  %%debug chassis auto-reboot enable|disable%% ​ |  %%removed%% ​ |
 +|  %%debug chassis auto-reboot ni enable|disable%% ​ |  %%removed%% ​ |
 +|  %%debug chassis hello timers enable|disable%% ​ |  %%removed%% ​ |
 +|  %%debug chassis secondary emp {enable | disable}%% ​ |  %%removed%% ​ |
 +|  %%debug chassis hello {enable | disable}%% ​ |  %%removed%% ​ |
 +|  %%debug chassis show%% ​ |  %%removed%% ​ |
 +|  %%debug chassis show state trace%% ​ |  %%removed%% ​ |
 +|  %%debug chassis show application context all%%  |  %%removed%% ​ |
 +|  %%new command%% ​ |  %%debug show boardinfo%% ​ |
 +|  %%update fpga { [cmm [<​slot>​]] ​ |  [ni { <​slot>​ | all }] [daughter <​num>​] {file <​file-name>​} }%%  |  %%no change%% ​ |
 +===== DHCP RELAY =====
 +^  6.4.2.R01 Command ​ ^  7.1.1.R01 Command ​ ^
 +|  %%642Commands%% ​ |  %%711Commands%% ​ |
 +|  %%ip helper address ip_address%% ​ |  %%no change%% ​ |
 +|  %%ip helper no address [ip_address]%% ​ |  %%no ip helper address <​ip_address>​*%% ​ |
 +|  %%ip helper address ip_address vlan vlan_id%% ​ |  %%ip helper vlan <​vlan1[-vlan2]>​ address <​ip_address>​* %%  |
 +|  %%ip helper no address ip_address vlan vlan_id%% ​ |  %%no ip helper vlan <​vlan1[-vlan2]>​ address <​ip_address>​* %%  |
 +|  %%ip helper standard%% ​ |  %%no change%% ​ |
 +|  %%ip helper avlan only%% ​ |  %%removed%% ​ |
 +|  %%ip helper per-vlan only%% ​ |  %%ip helper per-vlan-only%% ​ |
 +|  %%ip helper forward delay seconds%% ​ |  %%ip helper forward-delay <​seconds>​%% ​ |
 +|  %%ip helper maximum hops hops%% ​ |  %%ip helper maximum-hops <​hops>​%% ​ |
 +|  %%ip helper agent-information {enable | disable}%% ​ |  %%no change%% ​ |
 +|  %%ip helper agent-information policy {drop | keep | replace}%% ​ |  %%no change%% ​ |
 +|  %%ip helper pxe-support {enable | disable}%% ​ |  %%no change%% ​ |
 +|  %%ip helper traffic-suppression {enable | disable}%% ​ |  %%removed%% ​ |
 +|  %%ip helper dhcp-snooping {enable | disable}%% ​ |  %%removed%% ​ |
 +|  %%ip helper dhcp-snooping mac-address verification {enable | disable}%% ​ |  %%removed%% ​ |
 +|  %%ip helper dhcp-snooping option-82 data-insertion {enable | disable}%% ​ |  %%removed%% ​ |
 +|  %%ip helper dhcp-snooping option-82 data-insertion format {base-mac | system-name | userstring string | interface-alias | auto-interface-alias}%% ​ |  %%removed%% ​ |
 +|  %%ip helper dhcp-snooping bypass option-82-check {enable | disable}%% ​ |  %%removed%% ​ |
 +|  %%ip helper dhcp-snooping vlan vlan_id [mac-address verification {enable | disable}] [option-82 data-insertion {enable | disable}]%% ​ |  %%removed%% ​ |
 +|  %%no ip helper dhcp-snooping vlan vlan_id%% ​ |  %%removed%% ​ |
 +|  %%ip helper dhcp-snooping port slot1/​port1[-port1a] {block | client-only | trust}%% ​ |  %%removed%% ​ |
 +|  %%ip helper dhcp-snooping linkagg num {block | client-only | trust}%% ​ |  %%removed%% ​ |
 +|  %%ip helper dhcp-snooping port slot1/​port1[-port1a] traffic-suppression {enable | disable}%% ​ |  %%removed%% ​ |
 +|  %%ip helper dhcp-snooping port slot1/​port1[-port1a] ip-source-filtering {enable | disable}%% ​ |  %%removed%% ​ |
 +|  %%ip helper dhcp-snooping port binding {[enable | disable] | [mac_address port slot/port address ip_address vlan vlan_id]}%% ​ |  %%removed%% ​ |
 +|  %%no ip helper dhcp-snooping port binding mac_address port slot/port address ip_address vlan vlan_id%% ​ |  %%removed%% ​ |
 +|  %%ip helper dhcp-snooping port binding timeout seconds%% ​ |  %%removed%% ​ |
 +|  %%ip helper dhcp-snooping port binding action {purge | renew}%% ​ |  %%removed%% ​ |
 +|  %%ip helper dhcp-snooping binding persistency {enable | disable}%% ​ |  %%removed%% ​ |
 +|  %%ip helper boot-up {enable | disable}%% ​ |  %%no change%% ​ |
 +|  %%ip helper boot-up enable {BOOTP | DHCP}%% ​ |  %%no change%% ​ |
 +|  %%ip udp relay {BOOTP | NBDD | NBNSNBDD | DNS | TACACS | TFTP | NTP | port [name]}%% ​ |  %%ip udp relay service {TFTP | TACACS | NTP | NBNS | NBDD | DNS} [description <​desc>​]%% ​ |
 +|  %%%%  |  %%ip udp relay port <​port>​ [description <​desc>​]%% ​ |
 +|  %%no ip udp relay {BOOTP | NBDD | NBNSNBDD | DNS | TACACS | TFTP | NTP | port}%% ​ |  %%ip udp relay no service {TFTP | TACACS | NTP | NBNS | NBDD | DNS}%% ​ |
 +|  %%%%  |  %%ip udp relay no port <​port>​%% ​ |
 +|  %%ip udp relay {BOOTP | NBDD | NBNSNBDD | DNS | TACACS | TFTP | NTP | port} vlan vlan_id%% ​ |  %%ip udp relay service {TFTP | TACACS | NTP | NBNS | NBDD | DNS} [description <​desc>​] vlan <​vlan1[-vlan2]>​%% ​ |
 +|  %%%%  |  %%ip udp relay port <​port>​ [description <​desc>​] vlan <​vlan1[-vlan2]>​%% ​ |
 +|  %%no ip udp relay {BOOTP | NBDD | NBNSNBDD | DNS | TACACS | TFTP | NTP | port} vlan vlan_id%% ​ |  %%ip udp relay service {TFTP | TACACS | NTP | NBNS | NBDD | DNS} no vlan <​vlan1[-vlan2]>​%% ​ |
 +|  %%%%  |  %%ip udp relay port <​port>​ no vlan <​vlan1[-vlan2]>​%% ​ |
 +|  %%new command%% ​ |  %%ip udp relay no statistics%% ​ |
 +|  %%show ip helper%% ​ |  %%no change%% ​ |
 +|  %%show ip helper stats%% ​ |  %%show ip helper statistics%% ​ |
 +|  %%ip helper no stats%% ​ |  %%no ip helper statistics%% ​ |
 +|  %%show ip helper dhcp-snooping vlan%% ​ |  %%removed%% ​ |
 +|  %%show ip helper dhcp-snooping port%% ​ |  %%removed%% ​ |
 +|  %%show ip helper dhcp-snooping binding%% ​ |  %%removed%% ​ |
 +|  %%show ip udp relay service [BOOTP | NBDD | NBNSNBDD | DNS | TACACS | TFTP | NTP | port]%% ​ |  %%show ip udp relay service {TFTP | TACACS | NTP | NBNS | NBDD | DNS}%% ​ |
 +|  %%show ip udp relay [BOOTP | NBDD | NBNSNBDD | DNS | TACACS | TFTP | NTP | port]%% ​ |  %%show ip udp relay port <​port>​%% ​ |
 +|  %%show ip udp relay destination [BOOTP | NBDD | NBNSNBDD | DNS | TACACS | TFTP | NTP | port]%% ​ |  %%show ip udp relay%% ​ |
 +|  %%show ip udp relay statistics%% ​ |  %%show ip udp relay statistics service {TFTP | TACACS | NTP | NBNS | NBDD | DNS}%% ​ |
 +|  %%show ip udp relay statistics [BOOTP | NBDD | NBNSNBDD | DNS | TACACS | TFTP | NTP | port]%% ​ |  %%show ip udp relay statistics port <​port>​%% ​ |
 +|  %%%%  |  %%show ip udp relay statistics%% ​ |
 +===== DVMRP =====
 +^  6.4.2.R01 Command ​ ^  7.1.1.R01 Command ​ ^
 +|  %%642Commands%% ​ |  %%711Commands%% ​ |
 +|  %%%%  |  %%VRP Prefix has been added to all cmds [{vrf vrf_name}]%% ​ |
 +|  %%ip load dvmrp%% ​ |  %%remaining cmd no change%% ​ |
 +|  %%ip dvmrp status {enable | disable}%% ​ |  %%ip dvmrp admin-state {enable | disable}%% ​ |
 +|  %%ip dvmrp flash-interval seconds%% ​ |  %%remaining cmd no change%% ​ |
 +|  %%ip dvmrp graft-timeout seconds%% ​ |  %%remaining cmd no change%% ​ |
 +|  %%ip dvmrp interface {interface_name}%% ​ |  %%remaining cmd no change%% ​ |
 +|  %%no ip dvmrp interface {interface_name}%% ​ |  %%remaining cmd no change%% ​ |
 +|  %%ip dvmrp interface {interface_name} metric value%% ​ |  %%remaining cmd no change%% ​ |
 +|  %%ip dvmrp neighbor-interval seconds%% ​ |  %%remaining cmd no change%% ​ |
 +|  %%ip dvmrp neighbor-timeout seconds%% ​ |  %%remaining cmd no change%% ​ |
 +|  %%ip dvmrp prune-lifetime seconds%% ​ |  %%remaining cmd no change%% ​ |
 +|  %%ip dvmrp prune-timeout seconds%% ​ |  %%remaining cmd no change%% ​ |
 +|  %%ip dvmrp report-interval seconds%% ​ |  %%remaining cmd no change%% ​ |
 +|  %%ip dvmrp route-holddown seconds%% ​ |  %%remaining cmd no change%% ​ |
 +|  %%ip dvmrp route-timeout seconds%% ​ |  %%remaining cmd no change%% ​ |
 +|  %%ip dvmrp subord-default {true | false}%% ​ |  %%remaining cmd no change%% ​ |
 +|  %%ip dvmrp tunnel {local_name} {remote_address}%% ​ |  %%removed: functionality replaced by 'ip interface <​name>​ tunnel [source <​ip_address>​] [destination <​ip_address>​] [protocol {ipip | gre}]'​%% ​ |
 +|  %%no ip dvmrp tunnel {local_name} {remote_address}%% ​ |  %%removed: functionality replaced by 'no ip dvmrp interface <​name>'​%% ​ |
 +|  %%ip dvmrp tunnel {interface_name remote_address} ttl value%% ​ |  %%removed%% ​ |
 +|  %%show ip dvmrp%% ​ |  %%remaining cmd no change%% ​ |
 +|  %%show ip dvmrp interface [ip_address | interface_name | enabled | disabled]%% ​ |  %%remaining cmd no change%% ​ |
 +|  %%show ip dvmrp neighbor [ip_address]%% ​ |  %%remaining cmd no change%% ​ |
 +|  %%show ip dvmrp nexthop [ip_address ip_mask]%% ​ |  %%remaining cmd no change%% ​ |
 +|  %%show ip dvmrp prune [group_address source_address source_mask]%% ​ |  %%remaining cmd no change%% ​ |
 +|  %%show ip dvmrp route [ip_address ip_mask]%% ​ |  %%remaining cmd no change%% ​ |
 +|  %%show ip dvmrp tunnel [local_address remote_address]%% ​ |  %%remaining cmd no change%% ​ |
 +===== MULTI-CHASSIS =====
 +^  6.4.2.R01 Command ​ ^  7.1.1.R01 Command ​ ^
 +|  %%MULTI-CHASSIS CHASSIS-ID <​chassisId>​ [IPC-VLAN <​vlan>​] [HELLO-INTERVAL <​interval>​]%% ​ |  %%no change%% ​ |
 +|  %%MULTI-CHASSIS {IPC-VLAN <​vlan>​ | HELLO-INTERVAL <​interval>​}%% ​ |  %%no change%% ​ |
 +|  %%NO MULTI-CHASSIS CHASSIS-ID%% ​ |  %%no change%% ​ |
 +|  %%MULTI-CHASSIS VIP-VLAN {<​vlan[-vlan2]>​} [ENABLE | DISABLE]%% ​ |  %%MULTI-CHASSIS VIP-VLAN {<​vlan[-vlan2]>​} [ADMIN-STATE {ENABLE | DISABLE}] [NAME <​name>​] [MTU-IP <​size>​]%% ​ |
 +|  %%NO MULTI-CHASSIS VIP-VLAN {<​vlan[-vlan2]>​}%% ​ |  %%no change%% ​ |
 +|  %%MULTI-CHASSIS VF-LINK CREATE%% ​ |  %%no change%% ​ |
 +|  %%NO MULTI-CHASSIS VF-LINK%% ​ |  %%no change%% ​ |
 +|  %%MULTI-CHASSIS VF-LINK MEMBER-PORT <​slot/​port>​%% ​ |  %%no change%% ​ |
 +|  %%NO MULTI-CHASSIS VF-LINK MEMBER-PORT <​slot/​port>​%% ​ |  %%no change%% ​ |
 +|  %%MULTI-CHASSIS VF-LINK DEFAULT-VLAN <​vlan>​%% ​ |  %%no change%% ​ |
 +|  %%MULTI-CHASSIS LOOP-DETECTION {ENABLE | DISABLE}%% ​ |  %%no change%% ​ |
 +|  %%MULTI-CHASSIS LOOP-DETECTION TRANSMIT-INTERVAL <​interval>​%% ​ |  %%no change%% ​ |
 +|  %%SHOW MULTI-CHASSIS STATUS%% ​ |  %%no change%% ​ |
 +|  %%SHOW MULTI-CHASSIS LOOP-DETECTION%% ​ |  %%no change%% ​ |
 +|  %%SHOW MULTI-CHASSIS VF-LINK%% ​ |  %%no change%% ​ |
 +|  %%SHOW MULTI-CHASSIS VF-LINK MEMBER-PORT [<​slot/​port>​]%% ​ |  %%no change%% ​ |
 +|  %%SHOW MULTI-CHASSIS CONSISTENCY%% ​ |  %%no change%% ​ |
 +|  %%SHOW MULTI-CHASSIS CONSISTENCY LINKAGG <​aggId>​%% ​ |  %%no change%% ​ |
 +|  %%DEBUG SHOW MULTI-CHASSIS LINKAGG [<​aggId>​] VLAN-LIST%% ​ |  %%no change%% ​ |
 +|  %%DEBUG SHOW MULTI-CHASSIS INFO%% ​ |  %%no change%% ​ |
 +===== SYSTEM SERVICES =====
 +^  6.4.2.R01 Command ​ ^  7.1.1.R01 Command ​ ^
 +|  %%UPDATE {MINIBOOT | UBOOT-MINIBOOT}%% ​ |  %%removed%% ​ |
 +|  %%update uboot cmm [<​int>​] [file <​filename>​]%% ​ |  %%no change%% ​ |
 +|  %%update uboot ni {<​int>​ | all} [file <​filename>​]%% ​ |  %%no change%% ​ |
 +|  %%show update uboot cmm [<​int>​]%% ​ |  %%no change%% ​ |
 +|  %%show update uboot ni {<​int>​ | all}%% ​ |  %%no change%% ​ |
 +|  %%MORE [<​string>​ | SIZE]%% ​ |  %%replaced by linux version of command: more%% ​ |
 +|  %%NO MORE%% ​ |  %%removed%% ​ |
 +|  %%SHOW MORE%% ​ |  %%removed%% ​ |
 +|  %%LS [-R] [<​string>​]%% ​ |  %%replaced by linux version of command: ls%%  |
 +|  %%RM [-R] [<​string>​]%% ​ |  %%replaced by linux version of command: rm%%  |
 +|  %%CP [-R] [<​string>​]%% ​ |  %%replaced by linux version of command: cp%%  |
 +|  %%FSCK /FLASH [REPAIR | NO-REPAIR]%% ​ |  %%removed%% ​ |
 +|  %%FSCK /UFLASH [REPAIR | NO-REPAIR]%% ​ |  %%no change%% ​ |
 +|  %%NEWFS /​FLASH%% ​ |  %%removed%% ​ |
 +|  %%DSHELL%% ​ |  %%removed%% ​ |
 +|  %%VIEW <​string>​%% ​ |  %%removed%% ​ |
 +|  %%TFTP {<​string>​ | <​ip_address>​} {GET | PUT} SOURCE-FILE <​string>​ [ASCII | DESTINATION-FILE <​string>​]%% ​ |  %%removed%% ​ |
 +|  %%MOUNT [/​UFLASH]%% ​ |  %%no change%% ​ |
 +|  %%UMOUNT /​UFLASH%% ​ |  %%no change%% ​ |
 +|  %%NEWFS /​UFLASH%% ​ |  %%no change%% ​ |
 +|  %%BACKUP <​string>​ <​string>​%% ​ |  %%removed%% ​ |
 +|  %%RESTORE <​string>​ [DISPLAY-ONLY | <​string>​]%% ​ |  %%removed%% ​ |
 +|  %%FREESPACE [/​FLASH]%% ​ |  %%freespace [/flash | /​uflash]%% ​ |
 +|  %%new command%% ​ |  %%usb {enable | disable}%% ​ |
 +|  %%new command%% ​ |  %%usb auto-copy {enable | disable}%% ​ |
 +|  %%new command%% ​ |  %%show usb statistics%% ​ |
 +|  %%NO KTRACE%% ​ |  %%removed%% ​ |
 +|  %%SFTP <​dest_address>​%% ​ |  %%replaced by linux version of command: sftp%% ​ |
 +|  %%SSH {<​dest_address>​ | ENABLE | DISABLE | ENFORCE PUBKEY-AUTH {ENABLE | DISABLE}}%% ​ |  %%replaced by linux version of command: ssh%%  |
 +|  %%SSH6 <​dest_address>​%% ​ |  %%removed%% ​ |
 +|  %%SFTP6 <​dest_address>​%% ​ |  %%removed%% ​ |
 +|  %%SHOW SSH CONFIG%% ​ |  %%removed%% ​ |
 +|  %%show history%% ​ |  %%history%% ​ |
 +|  %%history size <​size>​%% ​ |  %%removed%% ​ |
 +|  %%show history parameters%% ​ |  %%removed%% ​ |
 +|  %%DEBUG KTRACE [SHOW [LOG] | APPID <​appid>​ LEVEL <​level>​ | NO APPID <​appid>​ | ENABLE | DISABLE]%% ​ |  %%removed%% ​ |
 +|  %%DEBUG SYSTRACE {ENABLE | DISABLE | SHOW [LOG <​string>​] | APPID <​appid>​ LEVEL <​level>​ | NO APPID <​appid>​ | WATCH {ENABLE | DISABLE}}%% ​ |  %%removed%% ​ |
 +|  %%DEBUG ED <​string>​%% ​ |  %%removed%% ​ |
 +|  %%DEBUG TASKTRACE SHOW LOG%%  |  %%removed%% ​ |
 +|  %%SHOW SWLOG %%  |  %%show swlog [appid {<​appname>​ | all}]%% ​ |
 +|  %%SHOW LOG SWLOG [TIMESTAMP <​date>​ <​time>​ | SESSION <int> | APPID <app> | LEVEL <​level>​]%% ​ |  %%show log swlog [slot <​slot>​]%% ​ |
 +|  %%SWLOG CONSOLE LEVEL level %%  |  %%no change%% ​ |
 +|  %%SWLOG OUTPUT opt_output%% ​ |  %%no change%% ​ |
 +|  %%NO SWLOG OUTPUT opt_output %%  |  %%no change%% ​ |
 +|  %%SWLOG CLEAR %%  |  %%swlog clear [slot {<​int>​ | all}]%% ​ |
 +|  %%SWLOG OUTPUT FLASH FILE-SIZE integer %%  |  %%swlog output flash-file-size <​size>​%% ​ |
 +|  %%SWLOG OUTPUT SOCKET ipv6Address opt_integer optUserCmdHost %%  |  %%no change%% ​ |
 +|  %%NO SWLOG OUTPUT SOCKET ipv6Address %%  |  %%no change%% ​ |
 +|  %%SWLOG OUTPUT SOCKET ipAddress opt_integer optUserCmdHost %%  |  %%no change%% ​ |
 +|  %%NO SWLOG OUTPUT SOCKET ipAddress %%  |  %%no change%% ​ |
 +|  %%SWLOG REMOTE COMMAND-LOG on_off %%  |  %%no change%% ​ |
 +|  %%SWLOG SYSLOG-FACILITY-ID syslogFacilityIdList%% ​ |  %%no change%% ​ |
 +|  %%[NO] SWLOG%% ​ |  %%swlog [appid {<​appname>​ | all}  subapp {<​0-31>​ | all}] {enable | disable}%% ​ |
 +|  %%SWLOG APPID appIdList LEVEL level%% ​ |  %%swlog appid <​name> ​ subapp <​0-31>​ level <num> [vrf <​vrf>​]%% ​ |
 +|  %%NO SWLOG APPID appIdList%% ​ |  %%removed%% ​ |
 +|  %%new command%% ​ |  %%[no] swlog preamble%% ​ |
 +|  %%new command%% ​ |  %%[no] swlog duplicate-detect%% ​ |
 +|  %%new command%% ​ |  %%[no] debug swlog%% ​ |
 +|  %%new command%% ​ |  %%swlog hash-time-limit <​limit>​%% ​ |
 +|  %%new command%% ​ |  %%swlog output tty {enable | disable}%% ​ |
 +|  %%session banner {cli | ftp | http} <​file_name >​%% ​ |  %%session {cli|ftp|http} banner <​file_name>​%% ​ |
 +|  %%session banner no {cli | ftp | http} %%  |  %%no session {cli|ftp|http} banner %%  |
 +|  %%session timeout {cli | http | ftp} <​minutes>​ %%  |  %%session {cli|ftp|http} timeout <​minutes>​%% ​ |
 +|  %%session {ftp | tftp | sftp | telnet} port <​port>​%% ​ |  %%ip service {ftp | ssh | telnet} port {default | <​port>​}%% ​ |
 +|  %%session prompt default <​string>​%% ​ |  %%no change%% ​ |
 +|  %%who%% ​ |  %%no change%% ​ |
 +|  %%kill <​pid>​%% ​ |  %%no change%% ​ |
 +|  %%show session config%% ​ |  %%no change%% ​ |
 +|  %%whoami%% ​ |  %%no change%% ​ |
 +|  %%tty <int> <​int>​%% ​ |  %%no change%% ​ |
 +|  %%show tty%%  |  %%no change%% ​ |
 +|  %%chmod {+w | -w} <​string>​%% ​ |  %%no change%% ​ |
 +|  %%session login-timeout <​val>​%% ​ |  %%no change%% ​ |
 +|  %%session login-attemp <​val>​%% ​ |  %%no change%% ​ |
 +|  %%command-log {enable | disable}%% ​ |  %%no change%% ​ |
 +|  %%show command-log [status]%% ​ |  %%no change%% ​ |
 +|  %%show session xon-off%% ​ |  %%no change%% ​ |
 +|  %%session xon-off {enable | disable}%% ​ |  %%no change%% ​ |
 +|  %%IP DOMAIN-LOOKUP%% ​ |  %%no change%% ​ |
 +|  %%NO IP DOMAIN-LOOKUP%% ​ |  %%no change%% ​ |
 +|  %%IP NAME-SERVER {<​ip_address>​}+%% ​ |  %%no change%% ​ |
 +|  %%NO IP NAME-SERVER {ALL | <​ip_address>​}%% ​ |  %%no change%% ​ |
 +|  %%IP DOMAIN-NAME <​domain-name>​%% ​ |  %%no change%% ​ |
 +|  %%NO IP DOMAIN-NAME%% ​ |  %%no change%% ​ |
 +|  %%SHOW DNS%%  |  %%no change%% ​ |
 +|  %%IPV6 NAME-SERVER {ipv6Address}+%% ​ |  %%no change%% ​ |
 +|  %%NSLOOKUP {string | <​ip_address>​}%% ​ |  %%no change%% ​ |
 +|  %%AUTO KEYWORD COMPLETION [enable | disable]%% ​ |  %%no change%% ​ |
 +|  %%NO AUTO KEYWORD COMPLETION%% ​ |  %%no change%% ​ |
 +|  %%VERBOSE HELP [enable | disable]%% ​ |  %%no change%% ​ |
 +|  %%NO VERBOSE HELP%% ​ |  %%no change%% ​ |
 +|  %%SHOW PREFIX%% ​ |  %%no change%% ​ |
 +|  %%NO PREFIX%% ​ |  %%no change%% ​ |
 +|  %%USER PROFILE {SAVE | RESET}%% ​ |  %%no change%% ​ |
 +|  %%PROMPT [none | time | system | user | date | prefix | string <​prompt>​]%% ​ |  %%no change%% ​ |
 +|  %%modify boot parameters%% ​ |  %%no change%% ​ |
 +|  %%upgrade ni <int> license-key <"​string">​%% ​ |  %%removed%% ​ |
 +|  %%exit%% ​ |  %%replaced by linux version of command: exit%% ​ |
 +|  %%kill <​int>​%% ​ |  %%no change%% ​ |
 +|  %%alias <​string>​ <​string>​%% ​ |  %%replaced by linux version of command: alias%% ​ |
 +|  %%no alias [all | <​string>​]%% ​ |  %%replaced by linux version of command: unalias%% ​ |
 +|  %%show alias [all | <​string>​]%% ​ |  %%replaced by linux version of command: alias%% ​ |
 +|  %%cd [<​directory>​]%% ​ |  %%replaced by linux version of command: cd%%  |
 +|  %%pwd%% ​ |  %%replaced by linux version of command: pwd%%  |
 +|  %%mkdir [<​directory>​]%% ​ |  %%replaced by linux version of command: mkdir%% ​ |
 +|  %%rmdir [<​directory>​]%% ​ |  %%replaced by linux version of command: rmdir%% ​ |
 +|  %%dir [<​directory>​]%% ​ |  %%replaced by linux version of command: ls%%  |
 +|  %%rename <​file1>​ <​file2>​%% ​ |  %%replaced by linux version of command: mv%%  |
 +|  %%delete <​file>​%% ​ |  %%replaced by linux version of command: rm%%  |
 +|  %%mv <​file1>​ <​string>​%% ​ |  %%replaced by linux version of command: mv%%  |
 +|  %%move <​file1>​ <​string>​%% ​ |  %%replaced by linux version of command: mv%%  |
 +|  %%attrib {+w | -w} <​string>​%% ​ |  %%removed: same command as chmod%% ​ |
 +|  %%ftp {<​string>​ | <​ip_address>​}%% ​ |  %%replaced by linux version of command: ftp%%  |
 +|  %%vi <​filename>​%% ​ |  %%replaced by linux version of command: vi%%  |
 +|  %%telnet {<​string>​ | <​ip_address>​}%% ​ |  %%replaced by linux version of command: telnet%% ​ |
 +|  %%scp {<​string>​ | <​ip_address>​} {<​string>​ | <​ip_address>​}%% ​ |  %%replaced by linux version of command: scp%%  |
 +|  %%aclman%% ​ |  %%removed%% ​ |
 +|  %%rz%% ​ |  %%removed%% ​ |
 +|  %%install {<​string>​}+%% ​ |  %%removed%% ​ |
 +|  %%scp-sftp {enable | disable}%% ​ |  %%removed%% ​ |
 +|  %%ftp6 {<​string>​ | <​ipv6_address>​} ​ <​interface>​%% ​ |  %%removed%% ​ |
 +|  %%telnet6 {<​string>​ | <​ipv6_address>​} <​interface>​%% ​ |  %%removed%% ​ |
 +|  %%debug memory monitor {enable | disable}%% ​ |  %%removed%% ​ |
 +|  %%debug memory monitor show log [global | task | size]%% ​ |  %%removed%% ​ |
 +|  %%debug memory monitor show status%% ​ |  %%removed%% ​ |
 +|  %%show log pmd <​string>​ [type <​string>​ | id <id> | taskname <​name>​ | taskid <id> | record <​string>​ | address <int> | subid <​int>​]%% ​ |  %%removed%% ​ |
 +|  %%debug show pmd <int> <int> <int> <​int>​%% ​ |  %%removed%% ​ |
 +|  %%debug pmd show <int> <int> <int> <​int>​%% ​ |  %%removed%% ​ |
 +|  %%debug remove pmd <int> <int> <int> <​int>​%% ​ |  %%removed%% ​ |
 +|  %%debug pmd remove <int> <int> <int> <​int>​%% ​ |  %%removed%% ​ |
 +|  %%debug dump pmd <int> <int> <int> <int> <​string>​%% ​ |  %%removed%% ​ |
 +|  %%debug pmd dump <int> <int> <int> <int> <​string>​%% ​ |  %%removed%% ​ |
 +|  %%debug pmd ni%%  |  %%removed%% ​ |
 +|  %%AUTO KEYWORD COMPLETION [ENABLE | DISABLE]%% ​ |  %%removed: not supported%% ​ |
 +|  %%NO AUTO KEYWORD COMPLETION%% ​ |  %%removed: not supported%% ​ |
 +|  %%PROMPT [NONE] [TIME | SYSTEM | USER | DATE | PREFIX | STRING <​string>​]*%% ​ |  %%removed: use '​export PS1="​prompt string->"​%% ​ |
 +===== AAA =====
 +^  6.4.2.R01 Command ​ ^  7.1.1.R01 Command ​ ^
 +|  %%AAA RADIUS AGENT PREFERRED {DEFAULT | NO-LOOPBACK | <​ip_address>​}%% ​ |  %%removed%% ​ |
 +|  %%NO AAA RADIUS AGENT PREFERRED%% ​ |  %%removed%% ​ |
 +|  %%new command%% ​ |  %%USER admin CONSOLE-ONLY {ENABLE | DISABLE}%% ​ |
 +|  %%USER “user_name” END-USER-PROFILE <​string>​%% ​ |  %%removed%% ​ |
 +|  %%USER “user_name” NO END-USER-PROFILE%% ​ |  %%removed%% ​ |
 +|  %%END-USER PROFILE %%  |  %%removed%% ​ |
 +|  %%NO END-USER PROFILE %%  |  %%removed%% ​ |
 +|  %%SHOW END-USER PROFILE %%  |  %%removed%% ​ |
 +|  %%DEBUG END-USER PROFILE %%  |  %%removed%% ​ |
 +|  %%SHOW USER PASSWORD-EXPIRATION%% ​ |  %%removed%% ​ |
 +|  %%SHOW USER PASSWORD-SIZE%% ​ |  %%removed%% ​ |
 +|  %%AAA RADIUS-AGENT%% ​ |  %%removed%% ​ |
 +|  %%AAA ACE-SERVER%% ​ |  %%removed%% ​ |
 +===== BFD =====
 +^  6.4.2.R01 Command ​ ^  7.1.1.R01 Command ​ ^
 +|  %% All cmds have optional VRF prefix [vrf {vrf_name}]%% ​ |  %% All cmds have optional VRF prefix [vrf {vrf_name}]%% ​ |
 +|  %%ip bfd-std status {enable | disable}%% ​ |  %%ip bfd admin-state {enable | disable}%% ​ |
 +|  %%ip bfd-std transmit transmit-interval%% ​ |  %%ip bfd transmit <​transmit-interval>​%% ​ |
 +|  %%ip bfd-std receive receive-interval%% ​ |  %%ip bfd receive <​receive-interval>​%% ​ |
 +|  %%ip bfd-std mode {echo-only | demand echo {enable | disable} | asynchronous echo {enable|disable}}%% ​ |  %%ip bfd mode {echo-only | demand [echo-state {enable | disable}] | asynchronous [echo-state {enable | disable}] }%%  |
 +|  %%ip bfd-std echo status {enable | disable}%% ​ |  %%ip bfd echo-state {enable | disable}%% ​ |
 +|  %%ip bfd-std echo interval echo-interval%% ​ |  %%ip bfd echo-interval <​echo-interval>​%% ​ |
 +|  %%ip bfd-std 12-hold-timer l2-holdtimer-interval%% ​ |  %%ip bfd 12-hold-timer <​l2-holdtimer-interval>​%% ​ |
 +|  %%ip bfd-std interface interface_name%% ​ |  %%ip bfd interface <​interface_name>​%% ​ |
 +|  %%no ip bfd-std interface interface_name%% ​ |  %%no ip bfd interface <​interface_name>​%% ​ |
 +|  %%ip bfd-std interface interface_name status {enable | disable}%% ​ |  %%ip bfd interface <​interface_name>​ admin-state {enable | disable}%% ​ |
 +|  %%ip bfd-std interface interface_name transmit transmit-interval%% ​ |  %%ip bfd interface <​interface_name>​ transmit <​transmit-interval>​%% ​ |
 +|  %%ip bfd-std interface interface_name receive receive-interval%% ​ |  %%ip bfd interface <​interface_name>​ receive <​receive-interval>​%% ​ |
 +|  %%ip bfd-std interface interface_name multiplier multiplier_value%% ​ |  %%ip bfd interface <​interface_name>​ multiplier <​multiplier_value>​%% ​ |
 +|  %%ip bfd-std interface interface_name echo-interval echo-interval%% ​ |  %%ip bfd interface <​interface_name>​ echo-interval <​echo-interval>​%% ​ |
 +|  %%ip bfd-std interface interface_name mode {echo-only | demand [echo {enable | disable}] | asynchronous [echo {enable|disable}}%% ​ |  %%ip bfd interface <​interface_name>​ mode {echo-only | demand [echo-state {enable | disable}] | asynchronous [echo-state {enable | disable}] }%%  |
 +|  %%ip bfd-std interface interface_name 12-hold-timer l2-holdtimer-interval%% ​ |  %%ip bfd interface <​interface_name>​ 12-hold-timer <​l2-holdtimer-interval>​%% ​ |
 +|  %%ip ospf bfd-std status {enable | disable}%% ​ |  %%ip ospf bfd-state {enable | disable}%% ​ |
 +|  %%[no] ip ospf bfd-std all-interfaces%% ​ |  %%ip ospf bfd-state all-interfaces {enable | disable}%% ​ |
 +|  %%ip ospf interface interface-name bfd-std {enable | disable}%% ​ |  %%ip ospf interface <​interface-name>​ bfd-state {enable | disable}%% ​ |
 +|  %%ip ospf interface interface-name bfd-std drs-only%% ​ |  %%ip ospf interface <​interface-name>​ bfd-state drs-only%% ​ |
 +|  %%ip ospf interface interface-name bfd-std all-nbrs%% ​ |  %%ip ospf interface <​interface-name>​ bfd-state all-neighbors {enable | disable}%% ​ |
 +|  %%ip bgp bfd-std status {enable | disable}%% ​ |  %%ip bgp bfd-state {enable | disable}%% ​ |
 +|  %%[no] ip bgp bfd-std all-neighbors%% ​ |  %%ip bgp bfd-state all-neighbors {enable | disable}%% ​ |
 +|  %%ip bgp neighbor name bfd-std {enable | disable}%% ​ |  %%ip bgp neighbor <​ip_address>​ bfd-state {enable | disable}%% ​ |
 +|  %%vrrp bfd-std {enable | disable}%% ​ |  %%vrrp bfd-state {enable | disable}%% ​ |
 +|  %%vrrp track num address address bfd-std {enable| disable}%% ​ |  %%vrrp track <num> address <​address>​ bfd-state {enable| disable}%% ​ |
 +|  %%show ip bfd-std%% ​ |  %%show ip bfd%%  |
 +|  %%show ip bfd-std interfaces [interface-name]%% ​ |  %%show ip bfd interfaces [<​interface-name>​]%% ​ |
 +|  %%show ip bfd-std [session <num> ] [sessions [slot <​num>​]%% ​ |  %%show ip bfd sessions [<​num>​] [slot <​num>​]%% ​ |
 +|  %%new command%% ​ |  %%ip bfd multiplier <​num>​%% ​ |
 +|  %%new command%% ​ |  %%show ip bfd sessions statistics [<​num>​]%% ​ |
 +===== BGP =====
 +^  6.4.2.R01 Command ​ ^  7.1.1.R01 Command ​ ^
 +|  %%642 Commands %%  |  %%711 Commands %%  |
 +|  %%VRF Prefix on all ipv4 (ip) cmds [vrf {vrf_name}]%% ​ |  %%VRF Prefix on all ipv4 (ip) cmds [vrf {vrf_name}]%% ​ |
 +|  %%ip load bgp%%  |  %%no change%% ​ |
 +|  %%ip bgp status {enable | disable}%% ​ |  %%ip bgp admin-state {enable | disable}%% ​ |
 +|  %%ip bgp unicast%% ​ |  %%no change%% ​ |
 +|  %%no ip bgp unicast%% ​ |  %%no change%% ​ |
 +|  %%ip bgp autonomous-system value%% ​ |  %%no change%% ​ |
 +|  %%ip bgp bestpath as-path ignore%% ​ |  %%no change%% ​ |
 +|  %%no ip bgp bestpath as-path ignore%% ​ |  %%no change%% ​ |
 +|  %%ip bgp cluster-id ip_address%% ​ |  %%no change%% ​ |
 +|  %%ip bgp default local-preference value%% ​ |  %%no change%% ​ |
 +|  %%ip bgp fast-external-failover%% ​ |  %%no change%% ​ |
 +|  %%no ip bgp fast-external-failover%% ​ |  %%no change%% ​ |
 +|  %%ip bgp always-compare-med%% ​ |  %%no change%% ​ |
 +|  %%no ip bgp always-compare-med%% ​ |  %%no change%% ​ |
 +|  %%ip bgp bestpath med missing-as-worst%% ​ |  %%no change%% ​ |
 +|  %%no ip bgp bestpath med missing-as-worst%% ​ |  %%no change%% ​ |
 +|  %%ip bgp client-to-client reflection%% ​ |  %%no change%% ​ |
 +|  %%no ip bgp client-to-client reflection%% ​ |  %%no change%% ​ |
 +|  %%ip bgp as-origin-interval seconds%% ​ |  %%no change%% ​ |
 +|  %%no ip bgp as-origin-interval%% ​ |  %%no change%% ​ |
 +|  %%ip bgp synchronization%% ​ |  %%no change%% ​ |
 +|  %%no ip bgp synchronization%% ​ |  %%no change%% ​ |
 +|  %%ip bgp confederation identifier value%% ​ |  %%no change%% ​ |
 +|  %%ip bgp maximum-paths%% ​ |  %%no change%% ​ |
 +|  %%no ip bgp maximum-paths%% ​ |  %%no change%% ​ |
 +|  %%ip bgp log-neighbor-changes%% ​ |  %%no change%% ​ |
 +|  %%no ip bgp log-neighbor-changes%% ​ |  %%no change%% ​ |
 +|  %%ip bgp dampening [half-life half_life reuse reuse suppress suppress max-suppress-time max_suppress_time]%% ​ |  %%no change%% ​ |
 +|  %%no ip bgp dampening%% ​ |  %%no change%% ​ |
 +|  %%ip bgp dampening clear%% ​ |  %%no change%% ​ |
 +|  %%ip bgp aggregate-address ip_address ip_mask%% ​ |  %%no change%% ​ |
 +|  %%no ip bgp aggregate-address ip_address ip_mask%% ​ |  %%no change%% ​ |
 +|  %%ip bgp aggregate-address ip_address ip_mask status {enable | disable}%% ​ |  %%ip bgp aggregate-address <​ip_address>​ <​ip_mask>​ admin-state {enable | disable}%% ​ |
 +|  %%ip bgp aggregate-address ip_address ip_mask as-set%% ​ |  %%no change%% ​ |
 +|  %%no ip bgp aggregate-address ip_address ip_mask as-set%% ​ |  %%no change%% ​ |
 +|  %%ip bgp aggregate-address ip_address ip_mask community string%% ​ |  %%no change%% ​ |
 +|  %%ip bgp aggregate-address ip_address ip_mask local-preference value%% ​ |  %%no change%% ​ |
 +|  %%no ip bgp aggregate-address ip_address ip_mask local-preference value%% ​ |  %%no change%% ​ |
 +|  %%ip bgp aggregate-address ip_address ip_mask metric value%% ​ |  %%no change%% ​ |
 +|  %%no ip bgp aggregate-address ip_address ip_mask metric value%% ​ |  %%no change%% ​ |
 +|  %%ip bgp aggregate-address ip_address ip_mask summary-only%% ​ |  %%no change%% ​ |
 +|  %%no ip bgp aggregate-address ip_address ip_mask summary-only%% ​ |  %%no change%% ​ |
 +|  %%ip bgp network network_address ip_mask%% ​ |  %%no change%% ​ |
 +|  %%no ip bgp network network_address ip_mask%% ​ |  %%no change%% ​ |
 +|  %%ip bgp network network_address ip_mask status {enable | disable}%% ​ |  %%ip bgp network <​network_address>​ <​ip_mask>​ admin-state {enable | disable}%% ​ |
 +|  %%ip bgp network network_address ip_mask community string%% ​ |  %%no change%% ​ |
 +|  %%ip bgp network network_address ip_mask local-preference value%% ​ |  %%no change%% ​ |
 +|  %%no ip bgp network network_address ip_mask local-preference value%% ​ |  %%no change%% ​ |
 +|  %%ip bgp network network_address ip_mask metric value%% ​ |  %%no change%% ​ |
 +|  %%no ip bgp network network_address ip_mask metric value%% ​ |  %%no change%% ​ |
 +|  %%ip bgp neighbor ip_address%% ​ |  %%no change%% ​ |
 +|  %%no ip bgp neighbor ip_address%% ​ |  %%no change%% ​ |
 +|  %%ip bgp neighbor ip_address status {enable | disable}%% ​ |  %%ip bgp neighbor <​ip_address>​ admin-state {enable | disable}%% ​ |
 +|  %%ip bgp neighbor ip_address advertisement-interval value%% ​ |  %%no change%% ​ |
 +|  %%ip bgp neighbor ip_address clear%% ​ |  %%no change%% ​ |
 +|  %%ip bgp neighbor ip_address route-reflector-client%% ​ |  %%no change%% ​ |
 +|  %%no ip bgp neighbor ip_address route-reflector-client%% ​ |  %%no change%% ​ |
 +|  %%ip bgp neighbor ip_address default-originate%% ​ |  %%no change%% ​ |
 +|  %%no ip bgp neighbor ip_address default-originate%% ​ |  %%no change%% ​ |
 +|  %%ip bgp neighbor ip_address timers keepalive holdtime%% ​ |  %%no change%% ​ |
 +|  %%ip bgp neighbor ip_address conn-retry-interval seconds%% ​ |  %%no change%% ​ |
 +|  %%ip bgp neighbor ip_address auto-restart%% ​ |  %%no change%% ​ |
 +|  %%ip bgp neighbor ip_address maximum-prefix maximum [warning-only]%% ​ |  %%no change%% ​ |
 +|  %%ip bgp neighbor ip_address md5 key {string | none}%% ​ |  %%no change%% ​ |
 +|  %%ip bgp neighbor ip_address md5 key-encrypt encrypted_string%% ​ |  %%no change%% ​ |
 +|  %%ip bgp neighbor ip_address ebgp-multihop [ttl]%% ​ |  %%no change%% ​ |
 +|  %%no ip bgp neighbor ip_address ebgp-multihop%% ​ |  %%no change%% ​ |
 +|  %%ip bgp neighbor ip_address description string%% ​ |  %%no change%% ​ |
 +|  %%ip bgp neighbor ip_address next-hop-self%% ​ |  %%no change%% ​ |
 +|  %%no ip bgp neighbor ip_address next-hop-self%% ​ |  %%no change%% ​ |
 +|  %%ip bgp neighbor ip_address passive%% ​ |  %%no change%% ​ |
 +|  %%no ip bgp neighbor ip_address passive%% ​ |  %%no change%% ​ |
 +|  %%ip bgp neighbor ip_address remote-as value%% ​ |  %%no change%% ​ |
 +|  %%ip bgp neighbor ip_address remove-private-as%% ​ |  %%no change%% ​ |
 +|  %%no ip bgp neighbor ip_address remove-private-as%% ​ |  %%no change%% ​ |
 +|  %%ip bgp neighbor ip_address soft-reconfiguration%% ​ |  %%no change%% ​ |
 +|  %%no ip bgp neighbor ip_address soft-reconfiguration%% ​ |  %%no change%% ​ |
 +|  %%ip bgp neighbor ip_address stats-clear%% ​ |  %%no change%% ​ |
 +|  %%ip bgp confederation neighbor ip_address%% ​ |  %%no change%% ​ |
 +|  %%no ip bgp confederation neighbor ip_address%% ​ |  %%no change%% ​ |
 +|  %%ip bgp neighbor ip_address update-source [interface_name]%% ​ |  %%no change%% ​ |
 +|  %%ip bgp neighbor ip_address in-aspathlist {string | none}%% ​ |  %%no change%% ​ |
 +|  %%ip bgp neighbor ip_address in-communitylist {string | none}%% ​ |  %%no change%% ​ |
 +|  %%ip bgp neighbor ip_address in-prefixlist {string | none}%% ​ |  %%no change%% ​ |
 +|  %%ip bgp neighbor peer_address in-prefix6list pfx_list_name%% ​ |  %%no change%% ​ |
 +|  %%ip bgp neighbor peer_address out-prefix6list pfx_list_name%% ​ |  %%no change%% ​ |
 +|  %%ip bgp neighbor ip_address out-aspathlist {string | none}%% ​ |  %%no change%% ​ |
 +|  %%ip bgp neighbor ip_address out-communitylist {string | none}%% ​ |  %%no change%% ​ |
 +|  %%ip bgp neighbor ip_address out-prefixlist {string | none}%% ​ |  %%no change%% ​ |
 +|  %%ip bgp neighbor ip_address route-map {string | none} {in | out}%% ​ |  %%no change%% ​ |
 +|  %%no ip bgp neighbor ip_address route-map {in | out}%% ​ |  %%no change%% ​ |
 +|  %%ip bgp neighbor ip_address clear soft {in | out}%% ​ |  %%no change%% ​ |
 +|  %%ip bgp policy aspath-list name “regular_expression”%% ​ |  %%no change%% ​ |
 +|  %%no ip bgp policy aspath-list name “regular_expression”%% ​ |  %%no change%% ​ |
 +|  %%ip bgp policy aspath-list name “regular_expression” action {permit | deny}%% ​ |  %%no change%% ​ |
 +|  %%ip bgp policy aspath-list name “regular_expression” priority value%% ​ |  %%no change%% ​ |
 +|  %%ip bgp policy community-list name {none | no-export | no-advertise | no-export-subconfed | num:​num}%% ​ |  %%no change%% ​ |
 +|  %%no ip bgp policy community-list name {none | no-export | no-advertise | no-export-subconfed | num:​num}%% ​ |  %%no change%% ​ |
 +|  %%ip bgp policy community-list name {none | no-export | no-advertise | no-export-subconfed | num:num} action {permit | deny}%% ​ |  %%no change%% ​ |
 +|  %%ip bgp policy community-list name {none | no-export | no-advertise | no-export-subconfed | num:num} match-type {exact | occur}%% ​ |  %%no change%% ​ |
 +|  %%ip bgp policy community-list name {none | no-export | no-advertise | no-export-subconfed | num:num} priority value%% ​ |  %%no change%% ​ |
 +|  %%ip bgp policy prefix-list name ip_address ip_mask%% ​ |  %%no change%% ​ |
 +|  %%no ip bgp policy prefix-list name ip_address ip_mask%% ​ |  %%no change%% ​ |
 +|  %%ip bgp policy prefix-list name ip_address ip_mask action {permit | deny}%% ​ |  %%no change%% ​ |
 +|  %%ip bgp policy prefix-list name ip_address ip_mask ge value%% ​ |  %%no change%% ​ |
 +|  %%ip bgp policy prefix-list name ip_address ip_mask le value%% ​ |  %%no change%% ​ |
 +|  %%ip bgp policy prefix6-list pfx_list_name prefix6/​pfx_length [action{permit|deny}] [status{enable|disable}] [ge[{masklength}]] [le[{masklength}]]%% ​ |  %%ip bgp policy prefix6-list <​pfx_list_name>​ <​prefix6/​pfx_length>​ [action{permit|deny}] [admin-state {enable|disable}] [ge[{<​masklength>​}]] [le[{<​masklength>​}]]%% ​ |
 +|  %%no ip bgp policy prefix6-list pfx_list_name prefix6/​pfx_length [action{permit|deny}]%% ​ |  %%no change%% ​ |
 +|  %%ip bgp policy route-map name sequence_number%% ​ |  %%no change%% ​ |
 +|  %%ip bgp policy route-map name sequence_number action {permit | deny}%% ​ |  %%no change%% ​ |
 +|  %%ip bgp policy route-map name sequence_number aspath-list as_name%% ​ |  %%no change%% ​ |
 +|  %%ip bgp policy route-map name sequence_number asprepend path%% ​ |  %%no change%% ​ |
 +|  %%ip bgp policy route-map name sequence_number community [none | no-export | no-advertise | no-export-subconfed | num:​num]%% ​ |  %%no change%% ​ |
 +|  %%ip bgp policy route-map name sequence_number community-list name%% ​ |  %%no change%% ​ |
 +|  %%ip bgp policy route-map name sequence_number community-mode {add | replace}%% ​ |  %%no change%% ​ |
 +|  %%ip bgp policy route-map name sequence_number lpref value%% ​ |  %%no change%% ​ |
 +|  %%ip bgp policy route-map name sequence_number lpref-mode {none | inc | dec | rep}%% ​ |  %%no change%% ​ |
 +|  %%ip bgp policy route-map name sequence_number match-community [none | no-export | noadvertise | no-export-subconfed | num:​num]%% ​ |  %%no change%% ​ |
 +|  %%ip bgp policy route-map name sequence_number match-mask ip_address%% ​ |  %%no change%% ​ |
 +|  %%ip bgp policy route-map name sequence_number match-prefix ip_address%% ​ |  %%no change%% ​ |
 +|  %%ip bgp policy route-map name sequence_number match-regexp “regular_expression”%% ​ |  %%no change%% ​ |
 +|  %%ip bgp policy route-map name sequence_number med value%% ​ |  %%no change%% ​ |
 +|  %%ip bgp policy route-map name sequence_number med-mode {none | inc | dec | rep}%% ​ |  %%no change%% ​ |
 +|  %%ip bgp policy route-map name sequence_number origin {igp | egp| incomplete | none}%% ​ |  %%no change%% ​ |
 +|  %%ip bgp policy route-map name sequence_number prefix-list prefix_name%% ​ |  %%no change%% ​ |
 +|  %%ip bgp policy route-map name sequence_number weight value%% ​ |  %%no change%% ​ |
 +|  %%ip bgp policy route-map name sequence_number community-strip community_list%% ​ |  %%no change%% ​ |
 +|  %%show ip bgp%%  |  %%no change%% ​ |
 +|  %%show ip bgp statistics%% ​ |  %%no change%% ​ |
 +|  %%show ip bgp dampening%% ​ |  %%no change%% ​ |
 +|  %%show ip bgp dampening-stats [ip_address ip_mask] [peer_address]%% ​ |  %%no change%% ​ |
 +|  %%show ip bgp path%% ​ |  %%no change%% ​ |
 +|  %%show ip bgp routes [network_address ip_mask]%% ​ |  %%no change%% ​ |
 +|  %%show ip bgp aggregate-address [ip_address ip mask]%% ​ |  %%no change%% ​ |
 +|  %%show ip bgp network [network_address ip_mask]%% ​ |  %%no change%% ​ |
 +|  %%show ip bgp neighbors [ip_address]%% ​ |  %%no change%% ​ |
 +|  %%show ip bgp neighbors policy ipv4_address%% ​ |  %%no change%% ​ |
 +|  %%show ip bgp neighbors timer [ip_address]%% ​ |  %%no change%% ​ |
 +|  %%show ip bgp neighbors statistics [ip_address]%% ​ |  %%no change%% ​ |
 +|  %%show ip bgp policy aspath-list [name] [“regular_expression”]%% ​ |  %%no change%% ​ |
 +|  %%show ip bgp policy community-list [name] [string]%% ​ |  %%no change%% ​ |
 +|  %%show ip bgp policy prefix-list [name] [ip_address ip_mask]%% ​ |  %%no change%% ​ |
 +|  %%show ip bgp policy prefix6-list [pfx_list_name[{prefix6/​prefix_length}]]%% ​ |  %%no change%% ​ |
 +|  %%show ip bgp policy route-map [name] [sequence_number]%% ​ |  %%no change%% ​ |
 +|  %%ip bgp graceful-restart%% ​ |  %%no change%% ​ |
 +|  %%no ip bgp graceful-restart%% ​ |  %%no change%% ​ |
 +|  %%ip bgp graceful-restart restart-interval [seconds]%% ​ |  %%no change%% ​ |
 +|  %%ipv6 bgp unicast%% ​ |  %%no change%% ​ |
 +|  %%no ipv6 bgp unicast%% ​ |  %%no change%% ​ |
 +|  %%ip bgp neighbor ip_address activate-ipv6%% ​ |  %%no change%% ​ |
 +|  %%no ip bgp neighbor ip_address activate-ipv6%% ​ |  %%no change%% ​ |
 +|  %%ip bgp neighbor ip_address ipv6-nexthop ipv6_address%% ​ |  %%no change%% ​ |
 +|  %%show ipv6 bgp path [ipv6-addr ipv6_address/​prefix_length]%% ​ |  %%no change%% ​ |
 +|  %%show ipv6 bgp routes%% ​ |  %%no change%% ​ |
 +|  %%ipv6 bgp network ipv6_address/​prefix_length%% ​ |  %%no change%% ​ |
 +|  %%no ipv6 bgp network ipv6_address/​prefix_length%% ​ |  %%no change%% ​ |
 +|  %%ipv6 bgp network ipv6_address/​prefix_length [community {none | num | num:​num}]%% ​ |  %%no change%% ​ |
 +|  %%ipv6 bgp network ipv6_address/​prefix_length [local-preference num]%% ​ |  %%no change%% ​ |
 +|  %%ipv6 bgp network ipv6_address/​prefix_length [metric num]%% ​ |  %%no change%% ​ |
 +|  %%ipv6 bgp network ipv6_address/​prefix_length [status {enable | disable}]%% ​ |  %%ipv6 bgp network <​ipv6_address/​prefix_length>​ [admin-state {enable | disable}]%% ​ |
 +|  %%show ipv6 bgp network [ipv6_address/​prefix_length]%% ​ |  %%no change%% ​ |
 +|  %%ipv6 bgp neighbor ipv6_address%% ​ |  %%no change%% ​ |
 +|  %%no ipv6 bgp neighbor ipv6_address%% ​ |  %%no change%% ​ |
 +|  %%ipv6 bgp neighbor peer6_address clear soft {in | out}%% ​ |  %%no change%% ​ |
 +|  %%ipv6 bgp neighbor peer6_address soft-reconfiguration%% ​ |  %%no change%% ​ |
 +|  %%no ipv6 bgp neighbor peer6_address soft-reconfiguration%% ​ |  %%no change%% ​ |
 +|  %%ipv6 bgp neighbor peer6_address in-prefix6list pfx_list_name%% ​ |  %%no change%% ​ |
 +|  %%ipv6 bgp neighbor peer6_address out-prefix6list pfx_list_name%% ​ |  %%no change%% ​ |
 +|  %%ipv6 bgp neighbor ipv6_address [activate-ipv6]%% ​ |  %%no change%% ​ |
 +|  %%no ipv6 bgp neighbor ipv6_address [activate-ipv6]%% ​ |  %%no change%% ​ |
 +|  %%ipv6 bgp neighbor ipv6_address [ipv6-nexthop ipv6_address]%% ​ |  %%no change%% ​ |
 +|  %%ipv6 bgp neighbor ipv6_address [status {enable | disable}]%% ​ |  %%ipv6 bgp neighbor <​ipv6_address>​ [admin-state {enable | disable}]%% ​ |
 +|  %%ipv6 bgp neighbor ipv6_address [remote-as num]%% ​ |  %%no change%% ​ |
 +|  %%ipv6 bgp neighbor ipv6_address [timers num num]%% ​ |  %%no change%% ​ |
 +|  %%ipv6 bgp neighbor ipv6_address [maximum-prefix num [warning-only]]%% ​ |  %%no change%% ​ |
 +|  %%no ipv6 bgp neighbor ipv6_address [maximum-prefix num [warning-only]]%% ​ |  %%no change%% ​ |
 +|  %%ipv6 bgp neighbor ipv6_address [next-hop-self]%% ​ |  %%no change%% ​ |
 +|  %%no ipv6 bgp neighbor ipv6_address [next-hop-self]%% ​ |  %%no change%% ​ |
 +|  %%ipv6 bgp neighbor ipv6_address [conn-retry-interval num]%% ​ |  %%no change%% ​ |
 +|  %%ipv6 bgp neighbor ipv6_address [default-originate]%% ​ |  %%no change%% ​ |
 +|  %%no ipv6 bgp neighbor ipv6_address [default-originate]%% ​ |  %%no change%% ​ |
 +|  %%ipv6 bgp neighbor ipv6_address [update-source interface_name]%% ​ |  %%no change%% ​ |
 +|  %%no ipv6 bgp neighbor ipv6_address [update-source interface_name]%% ​ |  %%no change%% ​ |
 +|  %%ipv6 bgp neighbor ipv6_address [ipv4-nexthop ip_address]%% ​ |  %%no change%% ​ |
 +|  %%show ipv6 bgp neighbors [ipv6_address]%% ​ |  %%no change%% ​ |
 +|  %%show ipv6 bgp neighbors statistics [ipv6_address]%% ​ |  %%no change%% ​ |
 +|  %%show ipv6 bgp neighbors timers [ipv6_address]%% ​ |  %%no change%% ​ |
 +|  %%show ipv6 bgp neighbors policy ipv6_address%% ​ |  %%no change%% ​ |
 +===== CAPABILITY MANAGER =====
 +^  6.4.2.R01 Command ​ ^  7.1.1.R01 Command ​ ^
 +|  %%hash-control brief%% ​ |  %%no change%% ​ |
 +|  %%hash-control extended [[no] udp-tcp-port]%% ​ |  %%no change%% ​ |
 +|  %%new command%% ​ |  %%hash-control load-balance non-ucast {enable | disable}%% ​ |
 +|  %%show hash-control%% ​ |  %%no change%% ​ |
 +|  %%new command%% ​ |  %%show hash-control non-ucast%% ​ |
 +|  %%new command%% ​ |  %%show escalation-strategy [<​slot-id>​]%% ​ |
 +===== CONFIG MANAGER =====
 +^  6.4.2.R01 Command ​ ^  7.1.1.R01 Command ​ ^
 +|  %%configuration apply <​filename>​ [verbose]%% ​ |  %%no change%% ​ |
 +|  %%configuration syntax check <​filename>​ [verbose]%% ​ |  %%configuration syntax-check <​filename>​ [verbose]%% ​ |
 +|  %%configuration apply <​filename>​ [<​time>​]%% ​ |  %%no change%% ​ |
 +|  %%show configuration status%% ​ |  %%no change%% ​ |
 +|  %%configuration cancel%% ​ |  %%no change%% ​ |
 +|  %%configuration snapshot <​appname>​%% ​ |  %%no change%% ​ |
 +|  %%show configuration snapshot [<​appname>​]%% ​ |  %%no change%% ​ |
 +|  %%configuration error-file limit <​limit>​%% ​ |  %%configuration error-file-limit <​limit>​%% ​ |
 +|  %%SHOW TECH-SUPPORT%% ​ |  %%no change%% ​ |
 +|  %%SHOW TECH-SUPPORT LAYER2%% ​ |  %%no change%% ​ |
 +|  %%SHOW TECH-SUPPORT LAYER3%% ​ |  %%no change%% ​ |
 +|  %%SHOW TECH-SUPPORT LAYER3 RIP %%  |  %%no change%% ​ |
 +|  %%SHOW TECH-SUPPORT LAYER3 OSPF%% ​ |  %%no change%% ​ |
 +|  %%SHOW TECH-SUPPORT LAYER3 BGP %%  |  %%no change%% ​ |
 +|  %%SHOW TECH-SUPPORT LAYER3 PIM %%  |  %%no change%% ​ |
 +|  %%SHOW TECH-SUPPORT LAYER3 MROUTE %%  |  %%no change%% ​ |
 +|  %%SHOW TECH-SUPPORT LAYER3 DVMRP%% ​ |  %%no change%% ​ |
 +|  %%SHOW TECH-SUPPORT LAYER3 IPV6%% ​ |  %%no change%% ​ |
 +|  %%SHOW TECH-SUPPORT LAYER3 RIPNG%% ​ |  %%no change%% ​ |
 +|  %%SHOW TECH-SUPPORT LAYER3 OSPF3%% ​ |  %%no change%% ​ |
 +|  %%SHOW TECH-SUPPORT LAYER3 ISIS%% ​ |  %%no change%% ​ |
 +|  %%SHOW TECH-SUPPORT LAYER3 PIM6%% ​ |  %%no change%% ​ |
 +|  %%SHOW TECH-SUPPORT LAYER3 IPSEC%% ​ |  %%no change%% ​ |
 +|  %%SHOW TECH-SUPPORT LAYER3 BFD%%  |  %%no change%% ​ |
 +===== ERP =====
 +^  6.4.2.R01 Command ​ ^  7.1.1.R01 Command ​ ^
 +|  %%642Commands%% ​ |  %%711Commands%% ​ |
 +|  %%erp-ring ring_id port1 {slot/port | linkagg agg_num} port2 {slot/port | linkagg agg_num} service-vlan vlan_id level level_num [guard-timer guard_timer] [wait-torestore- timer wtr_timer] [enable | disable]%% ​ |  %%no change%% ​ |
 +|  %%no erp-ring ring_id%% ​ |  %%no change%% ​ |
 +|  %%erp-ring ring_id rpl-node {port slot/port | linkagg agg_num}%% ​ |  %%no change%% ​ |
 +|  %%no erp-ring ring_id rpl-node%% ​ |  %%no change%% ​ |
 +|  %%erp-ring ring_id wait-to-restore wtr_timer%% ​ |  %%no change%% ​ |
 +|  %%no erp-ring ring_id wait-to-restore%% ​ |  %%no change%% ​ |
 +|  %%erp-ring ring_id {enable | disable}%% ​ |  %%no change%% ​ |
 +|  %%erp-ring ring_id ethoam-event {port slot/port | linkagg agg_num} remote-endpoint mep_id%% ​ |  %%no change%% ​ |
 +|  %%no erp-ring ring_id ethoam-event {port slot/port | linkagg agg_num}%% ​ |  %%no change%% ​ |
 +|  %%erp-ring ring_id guard-timer guard_timer%% ​ |  %%no change%% ​ |
 +|  %%no erp-ring ring_id guard-timer%% ​ |  %%no change%% ​ |
 +|  %%clear erp statistics [ring ring_id [port slot/port | linkagg agg_num]]%% ​ |  %%no change%% ​ |
 +|  %%show erp [ring ring_id | [port slot/port | linkagg agg_num]]%% ​ |  %%no change%% ​ |
 +|  %%show erp [ring ring_id] protected-vlan%% ​ |  %%no change%% ​ |
 +|  %%show erp statistics [ring ring_id [port slot/port | linkagg agg_num]]%% ​ |  %%no change%% ​ |
 +|  %%new command%% ​ |  %%erp-ring <​ring_id>​ {port <​slot/​port>​ | linkagg <id>} virtual-sf-monitor {enable | disable}%% ​ |
 +===== ESM =====
 +^  6.4.2.R01 Command ​ ^  7.1.1.R01 Command ​ ^
 +|  %%642Commands%% ​ |  %%711Commands%% ​ |
 +|  %%interfaces {<​slot>​ | <​slot/​port[-port2]>​} {admin | autoneg } {enable|disable} %%  |  %%interfaces {<​slot>​ | <​slot/​port[-port2]>​} {admin-state | autoneg } {enable|disable} %%  |
 +|  %%trap slot[/​port[-port2]] port link {enable | disable | on | off}%% ​ |  %%interfaces {<​slot>​ | <​slot/​port1[-port2]>​} link-trap {enable|disable} %%  |
 +|  %%interfaces {<​slot>​ | <​slot/​port[-port2]>​} crossover {mdix | mdi | auto} %%  |  %%no change%% ​ |
 +|  %%interfaces {<​slot>​ | <​slot/​port[-port2]>​} duplex {half | full | auto}%% ​ |  %%no change%% ​ |
 +|  %%interfaces slot[/​port[-port2]] speed {auto | 10 | 100 | 1000 | 10000 | max {100 | 1000}}%% ​ |  %%interfaces {<​slot>​ | <​slot/​port1[-port2]>​} speed {10 | 100 | 1000 | auto | max {100 | 1000}}%% ​ |
 +|  %%interfaces {<​slot>​ | <​slot/​port[-port2]>​} pause {tx-and-rx|tx|rx|disable}%% ​ |  %%no change%% ​ |
 +|  %%new command%% ​ |  %%interfaces {<​slot>​ | <​slot/​port1[-port2]>​]} flood-limit {bcast|mcast|uucast|all} rate { pps <num> | mbps <num> | cap% <num> | enable | disable} %%  |
 +|  %%interfaces {<​slot>​ | <​slot/​port[-port2]>​} max frame <​size>​%% ​ |  %%interfaces {<​slot>​ | <​slot/​port1[-port2]>​} max-frame-size <​size>​%% ​ |
 +|  %%interfaces {<​slot>​ | <​slot/​port[-port2]>​} no l2 statistics [cli]%% ​ |  %%clear interfaces {<​slot>​ | <​slot/​port1[-port2]>​} l2-statistics [cli]%% ​ |
 +|  %%interfaces {<​slot>​ | <​slot/​port[-port2]>​} port {<​string>​ | <​num>​}%% ​ |  %%interfaces {<​slot>​ | <​slot/​port1[-port2]>​} alias {<​string>​ | <​num>​}%% ​ |
 +|  %%interfaces transceiver ddm [trap] {enable | disable}%% ​ |  %%interfaces ddm[-trap] {enable | disable}%% ​ |
 +|  %%new command%% ​ |  %%interfaces {<​slot>​ | <​slot/​port1[-port2]>​} ingress-bandwidth {mbps <num> [burst <​mbits>​] | enable | disable}%% ​ |
 +|  %%show interfaces [<​slot>​ | <​slot/​port[-port2]>​] {status | capability | flood rate | port | accounting | counters | traffic | pause}%% ​ |  %%show interfaces [<​slot>​ | <​slot/​port1[-port2]>​] {status | capability | flood-rate | port | accounting | counters [errors] | traffic}%% ​ |
 +|  %%new command%% ​ |  %%show interfaces [<​slot>​ | <​slot/​port1[-port2]>​] ingress-rate-limit%% ​ |
 +|  %%show interfaces transceiver [<​slot>​ | <​slot/​port[-port2]>​] transceiver [ddm | w-low | w-high | a-low | a high | actual]%% ​ |  %%show interfaces [<​slot>​ | <​slot/​port1[-port2]>​] ddm [w-low | w-high | a-high | a-low | actual | status]%% ​ |
 +|  %%show interfaces [<​slot>​ | <​slot/​port[-port]>​] port%% ​ |  %%show interfaces [<​slot>​ | <​slot/​port[-port]>​] alias%% ​ |
 +|  %%interfaces slot[/​port[-port2]] hybrid%% ​ |  %%removed: not supported at the moment%% ​ |
 +|  %%show interfaces [slot[/​port[-port2]]] hybrid%% ​ |  %%removed: not supported at the moment%% ​ |
 +|  %%interfaces {<​slot>​ | <​slot/​port[-port2]>​} {ifg <num> | flow {enable | disable} | clear-violation-all | runt <num> | runtsize <num> | register {lwm | dyncell} regval <num> | pause}%% ​ |  %%removed%% ​ |
 +|  %%intefaces [no] e2e-flow-vlan%% ​ |  %%removed%% ​ |
 +|  %%interfaces cli-prompt {enable | disable}%% ​ |  %%removed%% ​ |
 +|  %%10gig slot <​slot>​ {phys-a | phys-b}%% ​ |  %%removed%% ​ |
 +|  %%show interfaces [<​slot>​ | <​slot/​port[-port2]>​] {e2e-flow-vlan | flow | collisions | ifg | register {lwm | dyncell}}%% ​ |  %%removed%% ​ |
 +|  %%show 10gig [slot <​slot>​]%% ​ |  %%removed%% ​ |
 +|  %%debug interfaces [<​slot>​ | <​slot/​port[port2]>​] {backpressure [enable | disable] | automix {enable | disable} | mac [nonport | port | stats] | phy | led | mdix}%% ​ |  %%removed%% ​ |
 +|  %%debug interfaces set <​slot/​port>​ {mdix | automdix | linkled [activity]} {enable | disable}%% ​ |  %%removed%% ​ |
 +|  %%debug interfaces <​slot>​ switching <​hexNum>​ [<​num>​]%% ​ |  %%removed%% ​ |
 +|  %%debug interfaces [slot] backpressure%% ​ |  %%removed%% ​ |
 +|  %%debug interfaces set [slot] backpressure {enable | disable}%% ​ |  %%removed%% ​ |
 +===== GVRP =====
 +^  6.4.2.R01 Command ​ ^  7.1.1.R01 Command ​ ^
 +|  %%642Commands%% ​ |  %%711Commands%% ​ |
 +|  %%%%  |  %%Not Supported ATM%%  |
 +|  %%clear gvrp statistics [port <​slot/​port>​ | linkagg <​agg>​]%% ​ |  %%no change%% ​ |
 +|  %%[no] gvrp transparent-switching%% ​ |  %%no change%% ​ |
 +|  %%gvrp registration {normal | fixed | forbidden} {port <​slot/​port>​ | linkagg <​agg>​}%% ​ |  %%no change%% ​ |
 +|  %%no gvrp registration {port <​slot/​port>​ | linkagg <​agg>​}%% ​ |  %%no change%% ​ |
 +|  %%gvrp applicant {participant | non-participant | active} {port <​slot/​port>​ | linkagg <​agg>​}%% ​ |  %%no change%% ​ |
 +|  %%no gvrp applicant {port <​slot/​port>​ | linkagg <​agg>​}%% ​ |  %%no change%% ​ |
 +|  %%[no] gvrp restrict-vlan-registration {port <​slot/​port>​ | linkagg <​agg>​} <​vlan[-vlan]>​%% ​ |  %%no change%% ​ |
 +|  %%[no] gvrp static vlan-restrict {port <​slot/​port>​ | linkagg <​agg>​} <​vlan[-vlan]>​%% ​ |  %%[no] gvrp static-vlan-restrict {port <​slot/​port>​ | linkagg <​agg>​} <​vlan[-vlan]>​%% ​ |
 +|  %%gvrp timer {join | leave | leaveall} <​time> ​ {port <​slot/​port>​ | linkagg <​agg>​}%% ​ |  %%no change%% ​ |
 +|  %%no gvrp timer {join | leave | leaveall} {port <​slot/​port>​ | linkagg <​agg>​}%% ​ |  %%no change%% ​ |
 +|  %%show gvrp timer [join | leave | leaveall] [port <​slot/​port>​ | linkagg <​agg>​]%% ​ |  %%no change%% ​ |
 +|  %%show gvrp statistics [port <​slot/​port>​ | linkagg <​agg>​]%% ​ |  %%no change%% ​ |
 +|  %%[no] gvrp%% ​ |  %%no change%% ​ |
 +|  %%[no] gvrp {port <​slot/​port>​ | linkagg <​agg>​}%% ​ |  %%no change%% ​ |
 +|  %%show gvrp last-pdu-origin {port <​slot/​port>​ | linkagg <​agg>​}%% ​ |  %%no change%% ​ |
 +|  %%show gvrp configuration [port [<​slot/​port>​] | linkagg <​agg>​]%% ​ |  %%no change%% ​ |
 +|  %%gvrp maximum vlan <​limit>​%% ​ |  %%gvrp maximum-vlan <​limit>​%% ​ |
 +|  %%[no] gvrp restrict-vlan-advertisement {port <​slot/​port>​ | linkagg <​agg>​} <​vlan[-vlan]>​%% ​ |  %%no change%% ​ |
 +===== HEALTH MONITOR =====
 +^  6.4.2.R01 Command ​ ^  7.1.1.R01 Command ​ ^
 +|  %%health threshold {rx percent | txrx percent | memory percent | cpu percent}%% ​ |  %%no change%% ​ |
 +|  %%health threshold temperature degrees%% ​ |  %%removed%% ​ |
 +|  %%health interval seconds%% ​ |  %%no change%% ​ |
 +|  %%health statistics reset%% ​ |  %%removed%% ​ |
 +|  %%show health threshold [rx | txrx | memory | cpu | temperature]%% ​ |  %%show health configuration%% ​ |
 +|  %%show health interval%% ​ |  %%show health configuration%% ​ |
 +|  %%show health [statistics]%% ​ |  %%show health%% ​ |
 +|  %%show health {slot/port} [statistics]%% ​ |  %%show health {port <​slot/​port>​ | slot <​slot>​} [statistics]%% ​ |
 +|  %%show health all {memory | cpu | rx | txrx}%% ​ |  %%no change%% ​ |
 +|  %%show health slice slot%% ​ |  %%removed%% ​ |
 +|  %%show health fabric slot1[-slot2]%% ​ |  %%removed%% ​ |
 +===== HTTP =====
 +^  6.4.2.R01 Command ​ ^  7.1.1.R01 Command ​ ^
 +|  %%[no] { http | https } server%% ​ |  %%webview server { enable | disable }%%  |
 +|  %%new command%% ​ |  %%webview access { enable | disable }%%  |
 +|  %%[no] { http | https } ssl%%  |  %%webview force-ssl { enable | disable }%%  |
 +|  %%{ http | https } port { default | <​port>​ }%%  |  %%webview http-port { default | <​port>​ }%%  |
 +|  %%new command%% ​ |  %%webview https-port { default | <​port>​ }%%  |
 +|  %%show http%% ​ |  %%show webview%% ​ |
 +|  %%debug http%% ​ |  %%removed%% ​ |
 +===== IPSEC =====
 +^  6.4.2.R01 Command ​ ^  7.1.1.R01 Command ​ ^
 +|  %%ipsec key key_name {sa-authentication | sa-encryption} key%%  |  %%no change%% ​ |
 +|  %%ipsec security-key [old_key] new_key%% ​ |  %%no change%% ​ |
 +|  %%ipsec policy policy_name [priority priority] [source {ipv6_address [/​prefix_length]} [port port]] [destination {ipv6_address [/​prefix_length]}[port port]] [protocol protocol}] [in | out] [discard | ipsec | none] [description description] [no shutdown | shutdown]%% ​ |  %%ipsec policy policy_name [priority priority] [source {ipv6_address [/​prefix_length]} [port port]] [destination {ipv6_address [/​prefix_length]}[port port]] [protocol protocol}] [in | out] [discard | ipsec | none] [description description] [admin-state {enable | disable}]%% ​ |
 +|  %%no ipsec policy policy_name%% ​ |  %%no change%% ​ |
 +|  %%ipsec policy policy_name rule index [ah | esp]%% ​ |  %%no change%% ​ |
 +|  %%no ipsec policy policy_name rule index%% ​ |  %%no change%% ​ |
 +|  %%ipsec sa sa_name {esp | ah} [source ipv6_address] [destination ipv6_address] [spi spi] [encryption {null | des-cbc | 3des-cbc | aes-cbc [key-size key_length] | aes-ctr [key-size key_length]}] [authentication {none | hmac-md5 | hmacsha1 | aes-xcbc-mac}] [description description] [no shutdown | shutdown]%% ​ |  %%ipsec sa sa_name {esp | ah} [source ipv6_address] [destination ipv6_address] [spi spi] [encryption {null | 3des-cbc | aes-cbc [key-size key_length]}] [authentication {none | hmac-md5 | hmacsha1 | aes-xcbc-mac}] [description description] [admin-state {enable | disable}]%% ​ |
 +|  %%no ipsec sa name%% ​ |  %%no change%% ​ |
 +|  %%show ipsec policy [policy_name]%% ​ |  %%no change%% ​ |
 +|  %%show ipsec sa [sa_name | esp | ah]%%  |  %%no change%% ​ |
 +|  %%show ipsec key {sa-encryption | sa-authentication}%% ​ |  %%no change%% ​ |
 +|  %%show ipsec ipv6 statistics%% ​ |  %%no change%% ​ |
 +===== IPV4 =====
 +^  6.4.2.R01 Command ​ ^  7.1.1.R01 Command ​ ^
 +|  %%VRF Prefix on all cmds [vrf {vrf_name}]%% ​ |  %%VRF Prefix on all cmds [vrf {vrf_name}]%% ​ |
 +|  %%ip interface name [address ip_address] [mask subnet_mask] [vlan vid] [forward | no forward] [local-proxy-arp | no local-proxy-arp] [e2 | snap] [primary | no primary]%% ​ |  %%no change%% ​ |
 +|  %%new command variation for  virtual chassis%% ​ |  %%ip interface name [address ip_address] [mask subnet_mask] [vlan <​virtual-chassis-vlan-id>​] vip-address <​ip_address>​ %%  |
 +|  %%ip interface name admin {enable | disable}%% ​ |  %%ip interface <​name>​ admin-state {<​enable>​ | <​disable>​}%% ​ |
 +|  %%no ip interface name%% ​ |  %%no change%% ​ |
 +|  %%ip interface name tunnel [source ip_address] [destination ip_address] [protocol {ipip | gre}]%% ​ |  %%no change%% ​ |
 +|  %%ip router primary-address ip_address%% ​ |  %%no change%% ​ |
 +|  %%ip router router-id ip_address%% ​ |  %%no change%% ​ |
 +|  %%ip static-route ip_address [mask mask] gateway gateway [metric metric]%% ​ |  %%ip static-route ip_address [mask mask] {gateway gateway | follows ip_address} [metric metric] %%  |
 +|  %%no ip static-route ip_address [mask mask] gateway ip_address [metric metric]%% ​ |  %%no ip static-route ip_address [mask mask] {gateway ip_address | follows ip_address} [metric metric]%% ​ |
 +|  %%ip static-route ip_address [mask mask] gateway gateway bfd-std {enable | disable}%% ​ |  %%ip static-route ip_address [mask mask] gateway gateway bfd-state {enable | disable}%% ​ |
 +|  %%ip static-route all bfd-std {enable | disable}%% ​ |  %%ip static-route all bfd-state {enable | disable}%% ​ |
 +|  %%ip route-pref {static | ospf | rip | ebgp | ibgp} value%% ​ |  %%no change%% ​ |
 +|  %%ip default-ttl hops%% ​ |  %%no change%% ​ |
 +|  %%ping {ip_address | hostname} [count count] [size packet_size] [interval seconds] [timeout seconds]%% ​ |  %%no change%% ​ |
 +|  %%traceroute {ip_address | hostname} [max-hop max_hop_count]%% ​ |  %%no change%% ​ |
 +|  %%ip directed-broadcast {on | off}%% ​ |  %%no change%% ​ |
 +|  %%ip service {all | service_name | port service_port}%% ​ |  %%no change%% ​ |
 +|  %%no ip service {all | service_name | port service_port}%% ​ |  %%vlan types removed from service_name and service port%% ​ |
 +|  %%new command%% ​ |  %%ip service {ftp | ssh | telnet} port {default | <​port>​}%% ​ |
 +|  %%new command%% ​ |  %%[no] ip service access [<​ip_interface_name>​]%% ​ |
 +|  %%ip redist {local | static | rip | ospf | isis | bgp} into {rip | ospf | isis | bgp} route-map route-mapname [status {enable | disable}]%% ​ |  %%no change%% ​ |
 +|  %%no ip redist {local | static | rip | ospf | isis | bgp} into {rip | ospf | bgp} [route-map route-mapname]%% ​ |  %%no change%% ​ |
 +|  %%ip access-list access-list-name%% ​ |  %%no change%% ​ |
 +|  %%no ip access-list access-list-name%% ​ |  %%no change%% ​ |
 +|  %%ip access-list access-list-name address address/​prefixLen [action {permit | deny}] [redist-control {all-subnets | no-subnets | aggregate}]%% ​ |  %%no change%% ​ |
 +|  %%no ip access-list access-list-name address address/​prefixLen%% ​ |  %%no change%% ​ |
 +|  %%ip route-map route-map-name [sequence-number number] match ip-nexthop {access-list-name | ip_address/​prefixLen [permit | deny]}%% ​ |  %%no change%% ​ |
 +|  %%no ip route-map route-map-name [sequence-number number] match ip-nexthop {access-list-name | ip_address/​prefixLen [permit | deny]}%% ​ |  %%no change%% ​ |
 +|  %%ip route-map route-map-name [sequence-number number] match ipv6-nexthop {access-list-name | ipv6_address/​prefixLen [permit | deny]}%% ​ |  %%no change%% ​ |
 +|  %%no ip route-map route-map-name [sequence-number number] match ipv6-nexthop {access-list-name | ipv6_address/​prefixLen [permit | deny]}%% ​ |  %%no change%% ​ |
 +|  %%ip route-map route-map-name [sequence-number number] match ipv4-interface interfacename%% ​ |  %%no change%% ​ |
 +|  %%no ip route-map route-map-name [sequence-number number] match ipv4-interface interfacename%% ​ |  %%no change%% ​ |
 +|  %%ip route-map route-map-name [sequence-number number] match ipv6-interface interfacename%% ​ |  %%no change%% ​ |
 +|  %%no ip route-map route-map-name [sequence-number number] match ipv6-interface interfacename%% ​ |  %%no change%% ​ |
 +|  %%ip route-map route-map-name [sequence-number number] match metric metric [deviation deviation]%% ​ |  %%no change%% ​ |
 +|  %%no ip route-map route-map-name [sequence-number number] match metric metric [deviation deviation]%% ​ |  %%no change%% ​ |
 +|  %%ip route-map route-map-name [sequence-number number] match route-type {internal | external [type1 | type2] | level1 | level2}%% ​ |  %%no change%% ​ |
 +|  %%no ip route-map route-map-name [sequence-number number] match route-type {internal | external [type1 | type2] | level1 | level2}%% ​ |  %%no change%% ​ |
 +|  %%ip route-map route-map-name [sequence-number number] set metric metric [effect {add | subtract | replace | none}]%% ​ |  %%no change%% ​ |
 +|  %%no ip route-map route-map-name [sequence-number number] set metric metric [effect {add | subtract | replace | none}]%% ​ |  %%no change%% ​ |
 +|  %%ip route-map route-map-name [sequence-number number] set metric-type {internal | external [type1 | type2]}%% ​ |  %%no change%% ​ |
 +|  %%no ip route-map route-map-name [sequence-number number] set metric-type {internal | external [type1 | type2]}%% ​ |  %%no change%% ​ |
 +|  %%ip route-map route-map-name [sequence-number number] set tag tag-number%% ​ |  %%no change%% ​ |
 +|  %%no ip route-map route-map-name [sequence-number number] set tag tag-number%% ​ |  %%no change%% ​ |
 +|  %%ip route-map route-map-name [sequence-number number] set community community-string%% ​ |  %%no change%% ​ |
 +|  %%no ip route-map route-map-name [sequence-number number] set community communitystring%% ​ |  %%no change%% ​ |
 +|  %%ip route-map route-map-name [sequence-number number] set local-preference value%% ​ |  %%no change%% ​ |
 +|  %%no ip route-map route-map-name [sequence-number number] set local-preference value%% ​ |  %%no change%% ​ |
 +|  %%ip route-map route-map-name [sequence-number number] set level {level1 | level2 | level1-2}%% ​ |  %%no change%% ​ |
 +|  %%no ip route-map route-map-name [sequence-number number] set level {level1 | level2 | level1-2}%% ​ |  %%no change%% ​ |
 +|  %%ip route-map route-map-name [sequence-number number] set ip-nexthop ip_address%% ​ |  %%no change%% ​ |
 +|  %%no ip route-map route-map-name [sequence-number number] set ip-nexthop ip_address%% ​ |  %%no change%% ​ |
 +|  %%ip route-map route-map-name [sequence-number number] set ipv6-nexthop ipv6_address%% ​ |  %%no change%% ​ |
 +|  %%no ip route-map route-map-name [sequence-number number] set ipv6-nexthop ipv6_address%% ​ |  %%no change%% ​ |
 +|  %%vrf [name | default]%% ​ |  %%no change%% ​ |
 +|  %%no vrf name%% ​ |  %%no change%% ​ |
 +|  %%arp ip_address hardware_address [alias] [arp-name] [<​slot/​port>​]%% ​ |  %%arp <​ip_address>​ <​hardware_address>​ [alias] [<​arp-name>​] [port <​slot/​port>​] [linkagg <​agg_num>​]%% ​ |
 +|  %%no arp ip_address [alias]%% ​ |  %%no change%% ​ |
 +|  %%clear arp-cache%% ​ |  %%no change%% ​ |
 +|  %%ip dos arp-poison restricted-address ip_address%% ​ |  %%no change%% ​ |
 +|  %%no ip dos arp-poison restricted-address ip_address%% ​ |  %%no change%% ​ |
 +|  %%arp filter ip_address [mask ip_mask] [vid] [sender | target] [allow | block]%% ​ |  %%no change%% ​ |
 +|  %%no arp filter ip_address%% ​ |  %%no change%% ​ |
 +|  %%clear arp filter%% ​ |  %%no change%% ​ |
 +|  %%icmp type type code code {{enable | disable} | min-pkt-gap gap}%% ​ |  %%no change%% ​ |
 +|  %%icmp unreachable [net-unreachable | host-unreachable | protocol-unreachable | port-unreachable] {{enable | disable} | min-pkt-gap gap}%% ​ |  %%no change%% ​ |
 +|  %%icmp echo [request | reply] {{enable | disable} | min-pkt-gap gap}%% ​ |  %%no change%% ​ |
 +|  %%icmp timestamp [request | reply] {{enable | disable} | min-pkt-gap gap}%% ​ |  %%no change%% ​ |
 +|  %%icmp addr-mask [request | reply] {{enable | disable} | min-pkt-gap gap}%% ​ |  %%no change%% ​ |
 +|  %%icmp messages {enable | disable}%% ​ |  %%no change%% ​ |
 +|  %%ip dos scan close-port-penalty penalty_value%% ​ |  %%no change%% ​ |
 +|  %%ip dos scan tcp open-port-penalty penalty_value%% ​ |  %%no change%% ​ |
 +|  %%ip dos scan udp open-port-penalty penalty_value%% ​ |  %%no change%% ​ |
 +|  %%ip dos scan threshold threshold_value%% ​ |  %%no change%% ​ |
 +|  %%ip dos trap {enable | disable}%% ​ |  %%no change%% ​ |
 +|  %%ip dos scan decay decay_value%% ​ |  %%no change%% ​ |
 +|  %%show ip traffic%% ​ |  %%no change%% ​ |
 +|  %%show ip interface [name | emp | vlan vlan id]%%  |  %%no change%% ​ |
 +|  %%show ip route [summary]%% ​ |  %%show ip routes [summary]%% ​ |
 +|  %%show ip route-pref%% ​ |  %%no change%% ​ |
 +|  %%show ip redist [rip | ospf | bgp]%% ​ |  %%no change%% ​ |
 +|  %%show ip access-list [access-list-name]%% ​ |  %%no change%% ​ |
 +|  %%show ip route-map [route-map-name]%% ​ |  %%no change%% ​ |
 +|  %%show ip router database [protocol type | gateway ip_address | dest {ip_address/​prefixLen | ip_address}]%% ​ |  %%no change%% ​ |
 +|  %%show ip emp-route%% ​ |  %%show ip emp-routes%% ​ |
 +|  %%show ip config%% ​ |  %%no change%% ​ |
 +|  %%show ip protocols%% ​ |  %%no change%% ​ |
 +|  %%new command%% ​ |  %%show ip router-id%% ​ |
 +|  %%show ip service%% ​ |  %%no change%% ​ |
 +|  %%show vrf%%  |  %%no change%% ​ |
 +|  %%show arp [ip_address | hardware_address]%% ​ |  %%no change%% ​ |
 +|  %%show arp summary%% ​ |  %%no change%% ​ |
 +|  %%show arp filter [ip_address]%% ​ |  %%no change%% ​ |
 +|  %%show icmp control%% ​ |  %%no change%% ​ |
 +|  %%show icmp [statistics]%% ​ |  %%no change%% ​ |
 +|  %%show tcp statistics%% ​ |  %%no change%% ​ |
 +|  %%show tcp ports%% ​ |  %%no change%% ​ |
 +|  %%show udp statistics%% ​ |  %%no change%% ​ |
 +|  %%show udp ports%% ​ |  %%no change%% ​ |
 +|  %%show ip dos config%% ​ |  %%no change%% ​ |
 +|  %%show ip dos statistics%% ​ |  %%no change%% ​ |
 +|  %%show ip dos arp-poison%% ​ |  %%no change%% ​ |
 +===== IPV6 =====
 +^  6.4.2.R01 Command ​ ^  7.1.1.R01 Command ​ ^
 +|  %%ipv6 interface if_name [vlan vid | tunnel {tid | 6to4}] [base-reachable-time time] [ra-send {yes | no}] [ra-max-interval interval] [ra-managed-config-flag {true | false}] [ra-other-config-flag {true | false}] [ra-reachable-time time] [ra-retrans-timer time] [ra-default-lifetime time | no ra-default-lifetime] [ra-send-mtu] {yes | no}%%  |  %%new options [no ra-min-interval] [ra-cli-skew]%% ​ |
 +|  %%ipv6 interface if_name {enable | disable}%% ​ |  %%ipv6 interface <​if_name>​ admin-state {enable | disable}%% ​ |
 +|  %%no ipv6 interface if_name%% ​ |  %%no change%% ​ |
 +|  %%ipv6 address ipv6_address /​prefix_length [anycast] {if_name | loopback}%% ​ |  %%no change%% ​ |
 +|  %%no ipv6 address ipv6_address [anycast] {if_name | loopback}%% ​ |  %%no change%% ​ |
 +|  %%ipv6 address ipv6_prefix eui-64 {if_name | loopback}%% ​ |  %%no change%% ​ |
 +|  %%no ipv6 address ipv6_prefix eui-64 {if_name | loopback}%% ​ |  %%no change%% ​ |
 +|  %%ipv6 address global-id {generate | globalID}%% ​ |  %%no change%% ​ |
 +|  %%ipv6 address local-unicast [global-id globalID] [subnet-id subnetID] {interface-id interfaceID | eui-64} [prefix-length prefixLength] {if-name | loopback}%% ​ |  %%no change%% ​ |
 +|  %%[no] ipv6 address local-unicast [global-id globalID] [subnet-id subnetID] {interface-id interfaceID | eui-64} [prefix-length prefixLength] {if-name | loopback}%% ​ |  %%no change%% ​ |
 +|  %%ipv6 interface if_name tunnel {[source ipv4_source] [destination ipv4_destination]}%% ​ |  %%no change%% ​ |
 +|  %%ipv6 dad-check ipv6_address if_name%% ​ |  %%no change%% ​ |
 +|  %%ipv6 hop-limit value%% ​ |  %%no change%% ​ |
 +|  %%no ipv6 hop-limit%% ​ |  %%no change%% ​ |
 +|  %%ipv6 pmtu-lifetime time%% ​ |  %%no change%% ​ |
 +|  %%ipv6 host name ipv6_address%% ​ |  %%removed%% ​ |
 +|  %%no ipv6 host name ipv6_address%% ​ |  %%no change%% ​ |
 +|  %%ipv6 neighbor stale-lifetime stale-lifetime%% ​ |  %%no change%% ​ |
 +|  %%ipv6 neighbor ipv6_address hardware_address {if_name} slot/​port%% ​ |  %%ipv6 neighbor <​ipv6_address>​ <​hardware_address>​ <​if_name>​ {port <​slot/​port>​ | linkagg <​agg_id>​}%% ​ |
 +|  %%no ipv6 neighbor ipv6_address {if_name}%% ​ |  %%no change%% ​ |
 +|  %%ipv6 prefix ipv6_address /​prefix_length if_name [valid-lifetime time] [preferred-lifetime time] [on-link-flag {true | false} [autonomous-flag {true | false}] if_name%% ​ |  %%no change%% ​ |
 +|  %%no ipv6 prefix ipv6_address /​prefix_length if_name%% ​ |  %%no change%% ​ |
 +|  %%ipv6 route ipv6_prefix/​prefix_length ipv6_address [if_name]%% ​ |  %%no change%% ​ |
 +|  %%no ipv6 route ipv6_prefix/​prefix_length ipv6_address [if_name]%% ​ |  %%no change%% ​ |
 +|  %%ipv6 static-route ipv6_prefix/​prefix_length gateway ipv6_address [if_name] [metric metric]%% ​ |  %%no change%% ​ |
 +|  %%no ipv6 static-route ipv6_prefix/​prefix_length gateway ipv6_address [if_name]%% ​ |  %%no change%% ​ |
 +|  %%ipv6 route-pref {static | ospf | rip | ebgp | ibgp} value%% ​ |  %%no change%% ​ |
 +|  %%ping6 {ipv6_address | hostname} [if_name] [count count] [size data_size] [interval seconds]%% ​ |  %%no change%% ​ |
 +|  %%traceroute6 {ipv6_address | hostname} [if_name] [max-hop hop_count] [wait-time time] [port port_number] [probe-count probe]%% ​ |  %%new options [size size_value] [host-names {yes|no}]%% ​ |
 +|  %%show ipv6 hosts [substring]%% ​ |  %%removed%% ​ |
 +|  %%show ipv6 icmp statistics [if_name]%% ​ |  %%no change%% ​ |
 +|  %%show ipv6 interface [if_name | loopback]%% ​ |  %%no change%% ​ |
 +|  %%show ipv6 pmtu table%% ​ |  %%no change%% ​ |
 +|  %%clear ipv6 pmtu table%% ​ |  %%removed%% ​ |
 +|  %%show ipv6 neighbors [ipv6_prefix/​prefix_length | if_name | hw hardware_address | static]%% ​ |  %%no change%% ​ |
 +|  %%clear ipv6 neighbors%% ​ |  %%no change%% ​ |
 +|  %%show ipv6 prefixes%% ​ |  %%no change%% ​ |
 +|  %%show ipv6 routes [ipv6_prefix/​prefix_length | static]%% ​ |  %%no change%% ​ |
 +|  %%show ipv6 route-pref%% ​ |  %%no change%% ​ |
 +|  %%show iv6p router database [protocol type | gateway ipv6_address | dest ipv6_prefix/​prefix_length]%% ​ |  %%no change%% ​ |
 +|  %%show ipv6 tcp ports%% ​ |  %%removed%% ​ |
 +|  %%new command%% ​ |  %%show ipv6 tcp connections%% ​ |
 +|  %%new command%% ​ |  %%show ipv6 tcp listeners%% ​ |
 +|  %%clear ipv6 traffic%% ​ |  %%removed%% ​ |
 +|  %%show ipv6 tunnel%% ​ |  %%no change%% ​ |
 +|  %%show ipv6 udp ports%% ​ |  %%no change%% ​ |
 +|  %%show ipv6 information%% ​ |  %%no change%% ​ |
 +|  %%ipv6 redist {local | static | rip | ospf | isis | bgp} into {rip | ospf | isis | bgp} route-map routemap-name [status {enable | disable}]%% ​ |  %%ipv6 redist {local | static | rip | ospf | isis | bgp} into {rip | ospf | isis | bgp} route-map <​routemap-name>​ [admin-state {enable | disable}]%% ​ |
 +|  %%ipv6 access-list access-list-name%% ​ |  %%no change%% ​ |
 +|  %%no ipv6 access-list access-list-name%% ​ |  %%no change%% ​ |
 +|  %%ipv6 access-list access-list-name address address/​prefixLen [action {permit | deny}] [redist-control {all-subnets | no-subnets | aggregate}]%% ​ |  %%no change%% ​ |
 +|  %%no ipv6 access-list access-list-name address address/​prefixLen%% ​ |  %%no change%% ​ |
 +|  %%show ipv6 redist [rip | ospf | bgp]%% ​ |  %%no change%% ​ |
 +|  %%show ip access-list [access-list-name]%% ​ |  %%no change%% ​ |
 +|  %%ipv6 load rip%%  |  %%no change%% ​ |
 +|  %%ipv6 rip status {enable | disable}%% ​ |  %%ipv6 rip admin-state {enable | disable}%% ​ |
 +|  %%ipv6 rip invalid-timer seconds%% ​ |  %%no change%% ​ |
 +|  %%ipv6 rip garbage-timer seconds%% ​ |  %%no change%% ​ |
 +|  %%ipv6 rip holddown-timer seconds%% ​ |  %%no change%% ​ |
 +|  %%ipv6 rip jitter value%% ​ |  %%no change%% ​ |
 +|  %%ipv6 rip route-tag value%% ​ |  %%no change%% ​ |
 +|  %%ipv6 rip update-interval seconds%% ​ |  %%no change%% ​ |
 +|  %%ipv6 rip triggered-sends {all | updated-only | none}%% ​ |  %%no change%% ​ |
 +|  %%ipv6 rip interface if_name%% ​ |  %%no change%% ​ |
 +|  %%[no] ipv6 rip interface if_name%% ​ |  %%no change%% ​ |
 +|  %%ipv6 rip interface if_name metric value%% ​ |  %%no change%% ​ |
 +|  %%ipv6 rip interface if_name recv-status {enable | disable}%% ​ |  %%no change%% ​ |
 +|  %%ipv6 rip interface if_name send-status {enable | disable}%% ​ |  %%no change%% ​ |
 +|  %%ipv6 rip interface if_name horizon {none | split-only | poison}%% ​ |  %%no change%% ​ |
 +|  %%show ipv6 rip%%  |  %%no change%% ​ |
 +|  %%show ipv6 rip interface [if_name]%% ​ |  %%no change%% ​ |
 +|  %%show ipv6 rip peer [ipv6_addresss]%% ​ |  %%no change%% ​ |
 +|  %%show ipv6 rip routes [dest <​ipv6_prefix/​prefix_length>​] | [gateway <​ipv6_addr>​] | [detail <ipv6 prefix/​prefix_length>​]%% ​ |  %%no change%% ​ |
 +===== LINK AGGREGATION =====
 +^  6.4.2.R01 Command ​ ^  7.1.1.R01 Command ​ ^
 +|  %%static linkagg agg_num size size [name name] [admin state {enable | disable}]%% ​ |  %%linkagg static agg <​agg_num1[-agg_num2]>​ size size [name name] [admin-state {enable | disable}] [multi-chassis active]%% ​ |
 +|  %%no static linkagg agg_num%% ​ |  %%no linkagg static agg <​agg_num1[-agg_num2]>​%% ​ |
 +|  %%static linkagg agg_num name name%% ​ |  %%linkagg static agg <​agg_num1[-agg_num2]>​ name name%% ​ |
 +|  %%static linkagg agg_num no name%% ​ |  %%no linkagg static agg <​agg_num1[-agg_num2]>​ name%% ​ |
 +|  %%static linkagg agg_num admin state {enable | disable}%% ​ |  %%linkagg static agg <​agg_num1[-agg_num2]>​ admin-state {enable | disable}%% ​ |
 +|  %%static agg slot/port agg num agg_num%% ​ |  %%linkagg static port <​slot/​port1[-port2]>​ agg agg_num%% ​ |
 +|  %%static agg no slot/​port%% ​ |  %%no linkagg static port <​slot/​port1[-port2]>​%% ​ |
 +|  %%lacp linkagg agg_num size size%% ​ |  %%linkagg lacp agg <​agg_num1[-agg_num2]>​ size size%% ​ |
 +|  %%no lacp linkagg agg_num%% ​ |  %%no linkagg lacp agg <​agg_num1[-agg_num2]>​%% ​ |
 +|  %%lacp linkagg agg_num name name%% ​ |  %%linkagg lacp agg <​agg_num1[-agg_num2]>​ name name%% ​ |
 +|  %%lacp linkagg agg_num no name%% ​ |  %%no linkagg lacp agg <​agg_num1[-agg_num2]>​ name%% ​ |
 +|  %%lacp linkagg agg_num admin state {enable | disable}%% ​ |  %%linkagg lacp agg <​agg_num1[-agg_num2]>​ admin-state {enable | disable}%% ​ |
 +|  %%lacp linkagg agg_num actor admin key actor_admin_key%% ​ |  %%linkagg lacp agg <​agg_num1[-agg_num2]>​ actor admin-key actor_admin_key%% ​ |
 +|  %%lacp linkagg agg_num no actor admin key%%  |  %%no linkagg lacp agg <​agg_num1[-agg_num2]>​ actor admin-key%% ​ |
 +|  %%lacp linkagg agg_num actor system priority actor_system_priority%% ​ |  %%linkagg lacp agg <​agg_num1[-agg_num2]>​ actor system-priority actor_system_priority%% ​ |
 +|  %%lacp linkagg agg_num no actor system priority%% ​ |  %%no linkagg lacp agg <​agg_num1[-agg_num2]>​ actor system-priority%% ​ |
 +|  %%lacp linkagg agg_num actor system id actor_system_id%% ​ |  %%linkagg lacp agg <​agg_num1[-agg_num2]>​ actor system-id actor_system_id%% ​ |
 +|  %%lacp linkagg agg_num no actor system id%%  |  %%no linkagg lacp agg <​agg_num1[-agg_num2]>​ actor system-id%% ​ |
 +|  %%lacp linkagg agg_num partner system id partner_system_id%% ​ |  %%linkagg lacp agg <​agg_num1[-agg_num2]>​ partner system-id partner_system_id%% ​ |
 +|  %%lacp linkagg agg_num no partner system id%%  |  %%no linkagg lacp agg <​agg_num1[-agg_num2]>​ partner system-id%% ​ |
 +|  %%lacp linkagg agg_num partner system priority partner_system_priority%% ​ |  %%linkagg lacp agg <​agg_num1[-agg_num2]>​ partner system-priority partner_system_priority%% ​ |
 +|  %%lacp linkagg agg_num no partner system priority%% ​ |  %%no linkagg lacp agg <​agg_num1[-agg_num2]>​ partner system-priority%% ​ |
 +|  %%lacp linkagg agg_num partner admin key partner_admin_key%% ​ |  %%linkagg lacp agg <​agg_num1[-agg_num2]>​ partner admin-key partner_admin_key%% ​ |
 +|  %%lacp linkagg agg_num no partner admin key%%  |  %%no linkagg lacp agg <​agg_num1[-agg_num2]>​ partner admin-key%% ​ |
 +|  %%lacp agg slot/port actor admin key actor_admin_key%% ​ |  %%linkagg lacp port <​slot/​port1[-port2]>​ actor admin-key actor_admin_key%% ​ |
 +|  %%lacp agg no slot/​port%% ​ |  %%no linkagg lacp port <​slot/​port1[-port2]>​%% ​ |
 +|  %%lacp agg slot/port actor admin state {[active] [timeout] [aggregate] [synchronize] [collect] [distribute] [default] [expire] | none}%% ​ |  %%linkagg lacp port <​slot/​port1[-port2]>​ actor admin-state {[active] [timeout] [aggregate] [synchronize] [collect] [distribute] [default] [expire] | none}%% ​ |
 +|  %%lacp agg slot/port actor admin state {[[no] active] [[no] timeout] [[no] aggregate] [[no] synchronize] [[no] collect] [[no] distribute] [[no] default] [[no] expire] | none}%% ​ |  %%no linkagg lacp port <​slot/​port1[-port2]>​ actor admin-state {[active] [timeout] [aggregate] [synchronize] [collect] [distribute] [default] [expire] | none}%% ​ |
 +|  %%lacp agg slot/port actor system id actor_system_id%% ​ |  %%linkagg lacp port <​slot/​port1[-port2]>​ actor system-id actor_system_id%% ​ |
 +|  %%lacp agg slot/port no actor system id%%  |  %%no linkagg lacp port <​slot/​port1[-port2]>​ actor system-id%% ​ |
 +|  %%lacp agg slot/port actor system priority actor_system_priority%% ​ |  %%linkagg lacp port <​slot/​port1[-port2]>​ actor system-priority actor_system_priority%% ​ |
 +|  %%lacp agg slot/port no actor system priority%% ​ |  %%no linkagg lacp port <​slot/​port1[-port2]>​ actor system-priority%% ​ |
 +|  %%lacp agg slot/port partner admin state {[active] [timeout] [aggregate] [synchronize] [collect] [distribute] [default] [expire] | none}%% ​ |  %%linkagg lacp port <​slot/​port1[-port2]>​ partner admin-state {[active] [timeout] [aggregate] [synchronize] [collect] [distribute] [default] [expire] | none}%% ​ |
 +|  %%lacp agg slot/port partner admin state {[[no] active] [[no] timeout] [[no] aggregate] [[no] synchronize] [[no] collect] [[no] distribute] [[no] default] [[no] expire] | none}%% ​ |  %%no linkagg lacp port <​slot/​port1[-port2]>​ partner admin-state {[active] [timeout] [aggregate] [synchronize] [collect] [distribute] [default] [expire] | none}%% ​ |
 +|  %%lacp agg slot/port partner admin system id partner_admin_system_id%% ​ |  %%linkagg lacp port <​slot/​port1[-port2]>​ partner admin-system-id partner_admin_system_id%% ​ |
 +|  %%lacp agg slot/port no partner admin system id%%  |  %%no linkagg lacp port <​slot/​port1[-port2]>​ partner admin-system-id%% ​ |
 +|  %%lacp agg slot/port partner admin key partner_admin_key%% ​ |  %%linkagg lacp port <​slot/​port1[-port2]>​ partner admin-key partner_admin_key%% ​ |
 +|  %%lacp agg slot/port no partner admin key%%  |  %%no linkagg lacp port <​slot/​port1[-port2]>​ partner admin-key%% ​ |
 +|  %%lacp agg slot/port partner admin system priority partner_admin_system_priority%% ​ |  %%linkagg lacp port <​slot/​port1[-port2]>​ partner admin-system-priority partner_admin_system_priority%% ​ |
 +|  %%lacp agg slot/port no partner admin system priority%% ​ |  %%no linkagg lacp port <​slot/​port1[-port2]>​ partner admin-system-priority%% ​ |
 +|  %%lacp agg slot/port actor port priority actor_port_priority%% ​ |  %%linkagg lacp port <​slot/​port1[-port2]>​ actor port-priority actor_port_priority%% ​ |
 +|  %%lacp agg slot/port no actor port priority%% ​ |  %%no linkagg lacp port <​slot/​port1[-port2]>​ actor port-priority%% ​ |
 +|  %%lacp agg slot/port partner admin port partner_admin_port%% ​ |  %%linkagg lacp port <​slot/​port1[-port2]>​ partner admin-port partner_admin_port%% ​ |
 +|  %%lacp agg slot/port no partner admin port%% ​ |  %%no linkagg lacp port <​slot/​port1[-port2]>​ partner admin-port%% ​ |
 +|  %%lacp agg slot/port partner admin port priority partner_admin_port_priority%% ​ |  %%linkagg lacp port <​slot/​port1[-port2]>​ partner admin-port-priority partner_admin_port_priority%% ​ |
 +|  %%lacp agg slot/port no partner admin port priority%% ​ |  %%no linkagg lacp port <​slot/​port1[-port2]>​ partner admin-port-priority%% ​ |
 +|  %%show linkagg [<​agg_num]%% ​ |  %%show linkagg agg [<​agg_num1[-agg_num2]>​]%% ​ |
 +|  %%show linkagg [agg_num] port [slot/​port]%% ​ |  %%show linkagg agg [<​agg_num1[-agg_num2]>​] port [slot/​port]%% ​ |
 +===== LLDP =====
 +^  6.4.2.R01 Command ​ ^  7.1.1.R01 Command ​ ^
 +|  %%lldp transmit interval seconds%% ​ |  %%no change%% ​ |
 +|  %%lldp transmit hold-multiplier num%%  |  %%no change%% ​ |
 +|  %%lldp transmit delay seconds%% ​ |  %%no change%% ​ |
 +|  %%lldp reinit delay seconds%% ​ |  %%no change%% ​ |
 +|  %%lldp notification interval seconds%% ​ |  %%no change%% ​ |
 +|  %%lldp {slot/port | slot | chassis} lldpdu {tx | rx | tx-and-rx | disable}%% ​ |  %%lldp {port <​slot/​port[-port]>​ | slot <​slot>​ | chassis} lldpdu {tx | rx | tx-and-rx | disable}%% ​ |
 +|  %%lldp {slot/port | slot | chassis} notification {enable | disable}%% ​ |  %%lldp {port <​slot/​port[-port]>​ | slot <​slot>​ | chassis} notification {enable | disable}%% ​ |
 +|  %%lldp {slot/port | slot | chassis} tlv management {port-description | system-name | systemdescription | system-capabilities | management-address} {enable | disable}%% ​ |  %%lldp {port <​slot/​port[-port]>​ | slot <​slot>​ | chassis} tlv management {port-description | system-name | systemdescription | system-capabilities | management-address} {enable | disable}%% ​ |
 +|  %%lldp {slot/port | slot | chassis} tlv dot1 {port-vlan | vlan-name} {enable | disable}%% ​ |  %%lldp {port <​slot/​port[-port]>​ | slot <​slot>​ | chassis} tlv dot1 {port-vlan | vlan-name} {enable | disable}%% ​ |
 +|  %%lldp {slot/port | slot | chassis} tlv dot3 mac-phy {enable | disable}%% ​ |  %%lldp {port <​slot/​port[-port]>​ | slot <​slot>​ | chassis} tlv dot3 mac-phy {enable | disable}%% ​ |
 +|  %%lldp {slot/port | slot | chassis} tlv med {power | capability} {enable | disable}%% ​ |  %%lldp {port <​slot/​port[-port]>​ | slot <​slot>​ | chassis} tlv med {power | capability} {enable | disable}%% ​ |
 +|  %%show lldp system-statistics%% ​ |  %%no change%% ​ |
 +|  %%show lldp [slot/port] statistics%% ​ |  %%show lldp [port <​slot/​port[-port]>​] statistics%% ​ |
 +|  %%show lldp local-system%% ​ |  %%no change%% ​ |
 +|  %%show lldp [slot/port | slot] local-port%% ​ |  %%show lldp [port <​slot/​port[-port]>​ | slot <​slot>​] local-port%% ​ |
 +|  %%show lldp local-management-address%% ​ |  %%no change%% ​ |
 +|  %%show lldp [slot/port | slot] remote-system%% ​ |  %%show lldp [port <​slot/​port[-port]>​ | slot <​slot>​] remote-system%% ​ |
 +|  %%show lldp [slot/port | slot] remote-system [med {network-policy | inventory}]%% ​ |  %%show lldp [port <​slot/​port[-port]>​ | slot <​slot>​] remote-system [med {network-policy | inventory}]%% ​ |
 +|  %%show lldp [<slot | slot/​port>​] config%% ​ |  %%show lldp [port <​slot/​port[-port]>​ | slot <​slot>​] config%% ​ |
 +|  %%show lldp [<slot | slot/​port>​] statistics%% ​ |  %%show lldp [port <​slot/​port[-port]>​ | slot <​slot>​] statistics%% ​ |
 +|  %%show lldp system-statistics ​ (remains same)%% ​ |  %%no change%% ​ |
 +|  %%show lldp local-management-address (remains same)%% ​ |  %%no change%% ​ |
 +===== MULTICAST-ROUTING =====
 +^  6.4.2.R01 Command ​ ^  7.1.1.R01 Command ​ ^
 +|  %%%%  |  %%VRF Prefix added to all IPv4(ip) cmds  [vrf {vrf_name}]%% ​ |
 +|  %%ip mroute-boundary if_name scoped_address mask%% ​ |  %%no change%% ​ |
 +|  %%no ip mroute-boundary if_name scoped_address mask%% ​ |  %%no change%% ​ |
 +|  %%ipv6 mroute-boundary if_name scope scope_value%% ​ |  %%no change%% ​ |
 +|  %%no ipv6 mroute-boundary if_name scope scope_value%% ​ |  %%no change%% ​ |
 +|  %%ip mroute interface if_ name ttl threshold%% ​ |  %%no change%% ​ |
 +|  %%show ip mroute-boundary%% ​ |  %%no change%% ​ |
 +|  %%show ipv6 mroute-boundary%% ​ |  %%no change%% ​ |
 +|  %%show ip mroute%% ​ |  %%no change%% ​ |
 +|  %%show ip mroute interface {interface_name}%% ​ |  %%no change%% ​ |
 +|  %%show ipv6 mroute interface {interface_name}%% ​ |  %%no change%% ​ |
 +|  %%show ip mroute-nexthop%% ​ |  %%no change%% ​ |
 +|  %%show ipv6 mroute%% ​ |  %%no change%% ​ |
 +|  %%show ipv6 mroute-nexthop%% ​ |  %%no change%% ​ |
 +===== MULTICAST =====
 +^  6.4.2.R01 Command ​ ^  7.1.1.R01 Command ​ ^
 +|  %%ip multicast [vlan <​vlan>​] status [enable | disable]%% ​ |  %%ip multicast [vlan <​vlan>​] admin-state [enable | disable]%% ​ |
 +|  %%ipv6 multicast [vlan <​vlan>​] status [enable | disable]%% ​ |  %%ipv6 multicast [vlan <​vlan>​] admin-state [enable | disable]%% ​ |
 +===== MVRP =====
 +^  6.4.2.R01 Command ​ ^  7.1.1.R01 Command ​ ^
 +|  %%mvrp {enable | disable}%% ​ |  %%no change%% ​ |
 +|  %%mvrp {port <​slot/​port>​ | linkagg <​agg>​} {enable | disable}%% ​ |  %%mvrp {port <​slot/​port[-port]>​ | linkagg <​agg[-agg]>​} {enable | disable}%% ​ |
 +|  %%mvrp transparent-switching {enable | disable}%% ​ |  %%no change%% ​ |
 +|  %%mvrp maximum vlan <​max>​%% ​ |  %%mvrp maximum-vlan <​max>​%% ​ |
 +|  %%mvrp {port <​slot/​port>​ | linkagg <​agg>​} registration {normal | fixed | forbidden}%% ​ |  %%mvrp {port <​slot/​port[-port]>​ | linkagg <​agg[-agg]>​} registration {normal | fixed | forbidden}%% ​ |
 +|  %%mvrp {port <​slot/​port>​ | linkagg <​agg>​} applicant {participant | non-participant | active}%% ​ |  %%mvrp {port <​slot/​port[-port]>​ | linkagg <​agg[-agg]>​} applicant {participant | non-participant | active}%% ​ |
 +|  %%mvrp {port <​slot/​port>​ | linkagg <​agg>​} timer {join | leave | leaveall | periodic-timer} <​time>​%% ​ |  %%mvrp {port <​slot/​port[-port]>​ | linkagg <​agg[-agg]>​} timer {join | leave | leaveall | periodic-timer} <​time>​%% ​ |
 +|  %%mvrp {port <​slot/​port>​ | linkagg <​agg>​} periodic-transmission {enable | disable}%% ​ |  %%mvrp {port <​slot/​port[-port]>​ | linkagg <​agg[-agg]>​} periodic-transmission {enable | disable}%% ​ |
 +|  %%[no] mvrp {port <​slot/​port>​ | linkagg <​agg>​} restrict-vlan-registration vlan <​vlan-vlan>​%% ​ |  %%[no] mvrp {port <​slot/​port[-port]>​ | linkagg <​agg[-agg]>​} restrict-vlan-registration vlan <​vlan-vlan>​%% ​ |
 +|  %%[no] mvrp {port <​slot/​port>​ | linkagg <​agg>​} restrict-vlan-advertisement vlan <​vlan-vlan>​%% ​ |  %%[no] mvrp {port <​slot/​port[-port]>​ | linkagg <​agg[-agg]>​} restrict-vlan-advertisement vlan <​vlan-vlan>​%% ​ |
 +|  %%[no] mvrp {port <​slot/​port>​ | linkagg <​agg>​} static-vlan-restrict vlan <​vlan-vlan>​%% ​ |  %%[no] mvrp {port <​slot/​port[-port]>​ | linkagg <​agg[-agg]>​} static-vlan-restrict vlan <​vlan-vlan>​%% ​ |
 +|  %%mvrp opt_{port <​slot/​port>​ | linkagg <​agg>​} clear-statistics%% ​ |  %%mvrp opt_{port <​slot/​port[-port]>​ | linkagg <​agg[-agg]>​} clear-statistics%% ​ |
 +|  %%show mvrp [port <​slot/​port>​ | linkagg <​agg>​] configuration%% ​ |  %%show mvrp [port <​slot/​port[-port]>​ | linkagg <​agg[-agg]>​] configuration%% ​ |
 +|  %%show mvrp {port [<​slot/​port>​] | linkagg [<​agg>​]} [enable | disable]%% ​ |  %%show mvrp {port [<​slot/​port[-port]>​] | linkagg [<​agg[-agg]>​]} [enable | disable]%% ​ |
 +|  %%show mvrp {port <​slot/​port>​ | linkagg <​agg>​} vlan-restrictions%% ​ |  %%show mvrp {port <​slot/​port[-port]>​ | linkagg <​agg[-agg]>​} vlan-restrictions%% ​ |
 +|  %%show mvrp [port <​slot/​port>​ | linkagg <​agg>​] timer [join | leave | leaveall | periodic-timer]%% ​ |  %%show mvrp [port <​slot/​port[-port]>​ | linkagg <​agg[-agg]>​] timer [join | leave | leaveall | periodic-timer]%% ​ |
 +|  %%show mvrp [port <​slot/​port>​ | linkagg <​agg>​] statistics%% ​ |  %%show mvrp [port <​slot/​port[-port]>​ | linkagg <​agg[-agg]>​] statistics%% ​ |
 +|  %%show mvrp {port <​slot/​port>​ | linkagg <​agg>​} last-pdu-origin%% ​ |  %%show mvrp {port <​slot/​port[-port]>​ | linkagg <​agg[-agg]>​} last-pdu-origin%% ​ |
 +===== NTP =====
 +^  6.4.2.R01 Command ​ ^  7.1.1.R01 Command ​ ^
 +|  %%ntp server {<​ip_address>​ | <​string>​} [key <int> | version <int> | minpoll <int> | prefer]%% ​ |  %%no change%% ​ |
 +|  %%no ntp server {<​ip_address>​ | <​string>​}%% ​ |  %%no change%% ​ |
 +|  %%show ntp client%% ​ |  %%no change%% ​ |
 +|  %%show ntp server status%% ​ |  %%no change%% ​ |
 +|  %%show ntp server client-list%% ​ |  %%no change%% ​ |
 +|  %%show ntp server disabled-interfaces%% ​ |  %%no change%% ​ |
 +|  %%show ntp server status <​ip_address>​%% ​ |  %%no change%% ​ |
 +|  %%show ntp client server-list%% ​ |  %%no change%% ​ |
 +|  %%ntp key <int> {trusted | untrusted}%% ​ |  %%no change%% ​ |
 +|  %%ntp key load%% ​ |  %%no change%% ​ |
 +|  %%show ntp keys%% ​ |  %%no change%% ​ |
 +|  %%ntp client {enable | disable}%% ​ |  %%no change%% ​ |
 +|  %%ntp broadcast-client {enable | disable}%% ​ |  %%no change%% ​ |
 +|  %%ntp broadcast-delay <​int>​%% ​ |  %%no change%% ​ |
 +|  %%ntp server synchronized%% ​ |  %%no change%% ​ |
 +|  %%ntp server unsynchronized%% ​ |  %%no change%% ​ |
 +|  %%ntp src-ip prefered {<​ip_address>​ | no-loopback0 | default}%% ​ |  %%no change%% ​ |
 +|  %%no ntp src-ip prefered%% ​ |  %%no change%% ​ |
 +|  %%ntp broadcast {<​ip_address>​ | <​string>​} [version <int> | minpoll <​int>​]%% ​ |  %%no change%% ​ |
 +|  %%no ntp broadcast {<​ip_address>​ | <​string>​}%% ​ |  %%no change%% ​ |
 +|  %%ntp peer {<​ip_address>​ | <​string>​} [key <int> | version <int> | minpoll <​int>​]%% ​ |  %%no change%% ​ |
 +|  %%no ntp peer {<​ip_address>​ | <​string>​}%% ​ |  %%no change%% ​ |
 +|  %%ntp interface <​ip_address>​ {enable | disable}%% ​ |  %%no change%% ​ |
 +|  %%ntp master <​int>​%% ​ |  %%no change%% ​ |
 +|  %%ntp max-associations <​int>​%% ​ |  %%no change%% ​ |
 +|  %%ntp authenticate {enable | disable}%% ​ |  %%no change%% ​ |
 +|  %%show ntp status%% ​ |  %%no change%% ​ |
 +|  %%show ntp peers%% ​ |  %%no change%% ​ |
 +|  %%ntp client prefered {<​ip_address>​ | no-loopback0 | default}%% ​ |  %%no change%% ​ |
 +|  %%no ntp client prefered%% ​ |  %%no change%% ​ |
 +===== OSPF =====
 +^  6.4.2.R01 Command ​ ^  7.1.1.R01 Command ​ ^
 +|  %%Optional VRF Prefix on all cmds [vrf {vrf_name}]%% ​ |  %%Optional VRF Prefix on all cmds [vrf {vrf_name}]%% ​ |
 +|  %%ip ospf status {enable | disable}%% ​ |  %%ip ospf admin-state {enable | disable}%% ​ |
 +|  %%ip load ospf%% ​ |  %%no change%% ​ |
 +|  %%ip ospf exit-overflow-interval seconds%% ​ |  %%no change%% ​ |
 +|  %%ip ospf extlsdb-limit limit%% ​ |  %%no change%% ​ |
 +|  %%ip ospf host ip_address tos tos [metric metric]%% ​ |  %%no change%% ​ |
 +|  %%no ip ospf host ip_address tos tos%%  |  %%no change%% ​ |
 +|  %%ip ospf mtu-checking%% ​ |  %%no change%% ​ |
 +|  %%no ip ospf mtu-checking%% ​ |  %%no change%% ​ |
 +|  %%ip ospf default-originate {only | always} [metric-type {type1 | type2}] [metric value]%% ​ |  %%no change%% ​ |
 +|  %%no ip ospf default-originate%% ​ |  %%no change%% ​ |
 +|  %%ip ospf route-tag tag%%  |  %%no change%% ​ |
 +|  %%ip ospf spf-timer [delay delay_seconds] [hold hold_seconds]%% ​ |  %%no change%% ​ |
 +|  %%ip ospf virtual-link area_id router_id [auth-type {none | simple | md5}] [auth-key key_string] [dead-interval seconds] [hello-interval seconds] [retrans-interval seconds] [transit-delay seconds]%% ​ |  %%no change%% ​ |
 +|  %%no ip ospf virtual-link area_id router_id%% ​ |  %%no change%% ​ |
 +|  %%ip ospf neighbor neighbor_id {eligible | non-eligible}%% ​ |  %%no change%% ​ |
 +|  %%no ip ospf neighbor neighbor_id%% ​ |  %%no change%% ​ |
 +|  %%ip ospf area area_id [summary {enable | disable}] | [type {normal | stub | nssa}]%% ​ |  %%no change%% ​ |
 +|  %%no ip ospf area area_id%% ​ |  %%no change%% ​ |
 +|  %%ip ospf area area_id default-metric tos [[cost cost] | [type {ospf | type 1 | type 2}]%%  |  %%no change%% ​ |
 +|  %%no ip ospf area area_id default-metric tos%%  |  %%no change%% ​ |
 +|  %%ip ospf area area_id range {summary | nssa} ip_address subnet_mask [effect {admatching | noMatching}]%% ​ |  %%no change%% ​ |
 +|  %%no ip ospf area area_id range {summary | nssa} ip_address subnet_mask%% ​ |  %%no change%% ​ |
 +|  %%ip ospf interface {interface_name}%% ​ |  %%no change%% ​ |
 +|  %%no ip ospf interface {interface_name}%% ​ |  %%no change%% ​ |
 +|  %%ip ospf interface {interface_name} status {enable | disable}%% ​ |  %%ip ospf interface {<​interface_name>​} admin-state {enable | disable}%% ​ |
 +|  %%ip ospf interface {interface_name} area area_id%% ​ |  %%no change%% ​ |
 +|  %%ip ospf interface {interface_name} auth-key key_string%% ​ |  %%no change%% ​ |
 +|  %%ip ospf interface {interface_name} auth-type [none | simple | md5]%% ​ |  %%no change%% ​ |
 +|  %%ip ospf interface {interface_name} dead-interval seconds%% ​ |  %%no change%% ​ |
 +|  %%ip ospf interface {interface_name} hello-interval seconds%% ​ |  %%no change%% ​ |
 +|  %%ip ospf interface {interface_name} md5 key_id [enable | disable]%% ​ |  %%no change%% ​ |
 +|  %%ip ospf interface {interface_name} md5 key_id key key_string%% ​ |  %%no change%% ​ |
 +|  %%ip ospf interface {interface_name} type {point-to-point | point-to-multipoint | broadcast | nonbroadcast}%% ​ |  %%no change%% ​ |
 +|  %%ip ospf interface {interface_name} cost cost%% ​ |  %%no change%% ​ |
 +|  %%ip ospf interface {interface_name} poll-interval seconds%% ​ |  %%no change%% ​ |
 +|  %%ip ospf interface {interface_name} priority priority%% ​ |  %%no change%% ​ |
 +|  %%ip ospf interface {interface_name} retrans-interval seconds%% ​ |  %%no change%% ​ |
 +|  %%ip ospf interface {interface_name} transit-delay seconds%% ​ |  %%no change%% ​ |
 +|  %%ip ospf restart-support {planned-unplanned | planned-only}%% ​ |  %%no change%% ​ |
 +|  %%no ip ospf restart-support%% ​ |  %%no change%% ​ |
 +|  %%ip ospf restart-interval [seconds]%% ​ |  %%no change%% ​ |
 +|  %%ip ospf restart-helper [status {enable | disable}]%% ​ |  %%ip ospf restart-helper [admin-state {enable | disable}]%% ​ |
 +|  %%ip ospf restart-helper strict-lsa-checking status {enable | disable}%% ​ |  %%ip ospf restart-helper strict-lsa-checking admin-state {enable | disable}%% ​ |
 +|  %%ip ospf restart initiate%% ​ |  %%no change%% ​ |
 +|  %%show ip ospf%% ​ |  %%no change%% ​ |
 +|  %%show ip ospf border-routers [area_id] [router_id] [tos] [gateway]%% ​ |  %%no change%% ​ |
 +|  %%show ip ospf ext-lsdb [linkstate-id ls_id] [router-id router_id]%% ​ |  %%no change%% ​ |
 +|  %%show ip ospf host [ip_address]%% ​ |  %%no change%% ​ |
 +|  %%show ip ospf lsdb [area_id] [rtr | net | netsum | asbrsum] [linkstate-id ls_id] [router-id router_id]%% ​ |  %%no change%% ​ |
 +|  %%show ip ospf neighbor [ip_address]%% ​ |  %%no change%% ​ |
 +|  %%show ip ospf routes [ip_addr mask tos gateway]%% ​ |  %%no change%% ​ |
 +|  %%show ip ospf virtual-link [router_id]%% ​ |  %%no change%% ​ |
 +|  %%show ip ospf virtual-neighbor area_id router_id%% ​ |  %%no change%% ​ |
 +|  %%show ip ospf area [area_id]%% ​ |  %%no change%% ​ |
 +|  %%show ip ospf area area_id range [{summary | nssa} ip_address ip_mask]%% ​ |  %%no change%% ​ |
 +|  %%show ip ospf area area_id stub%% ​ |  %%no change%% ​ |
 +|  %%show ip ospf interface [interface_name]%% ​ |  %%no change%% ​ |
 +|  %%show ip ospf restart%% ​ |  %%no change%% ​ |
 +===== OSPFV3 =====
 +^  6.4.2.R01 Command ​ ^  7.1.1.R01 Command ​ ^
 +|  %%ipv6 ospf status {enable | disable}%% ​ |  %%ipv6 ospf admin-state {enable | disable}%% ​ |
 +|  %%ipv6 load ospf%% ​ |  %%no change%% ​ |
 +|  %%ipv6 ospf host ipv6_address [area area_id] [metric metric]%% ​ |  %%no change%% ​ |
 +|  %%no ipv6 ospf host ipv6_address area area_id%% ​ |  %%no change%% ​ |
 +|  %%ipv6 ospf mtu-checking%% ​ |  %%no change%% ​ |
 +|  %%no ipv6 ospf mtu-checking%% ​ |  %%no change%% ​ |
 +|  %%ipv6 ospf route-tag tag%%  |  %%no change%% ​ |
 +|  %%ipv6 ospf spf-timer [delay delay_seconds] [hold hold_seconds]%% ​ |  %%no change%% ​ |
 +|  %%ipv6 ospf virtual-link area area_id router router_id [dead-interval seconds] [hello-interval seconds] [retrans-interval seconds] [transit-delay seconds]%% ​ |  %%no change%% ​ |
 +|  %%no ipv6 ospf virtual-link area area_id router router_id%% ​ |  %%no change%% ​ |
 +|  %%ipv6 ospf area area_id [type {normal | stub [default-metric metric]}]%% ​ |  %%no change%% ​ |
 +|  %%no ipv6 ospf area area_id%% ​ |  %%no change%% ​ |
 +|  %%ipv6 ospf interface interface_name%% ​ |  %%no change%% ​ |
 +|  %%no ipv6 ospf interface interface_name%% ​ |  %%no change%% ​ |
 +|  %%ipv6 ospf interface interface_name status {enable | disable}%% ​ |  %%ipv6 ospf interface interface_name admin-state {enable | disable}%% ​ |
 +|  %%no ipv6 ospf interface interface_name%% ​ |  %%no change%% ​ |
 +|  %%ipv6 ospf interface interface_name area area_id%% ​ |  %%no change%% ​ |
 +|  %%ipv6 ospf interface interface_name dead-interval seconds%% ​ |  %%no change%% ​ |
 +|  %%ipv6 ospf interface interface_name hello-interval seconds%% ​ |  %%no change%% ​ |
 +|  %%ipv6 ospf interface interface_name cost cost%% ​ |  %%no change%% ​ |
 +|  %%ip ospf interface interface_name priority priority%% ​ |  %%no change%% ​ |
 +|  %%ipv6 ospf interface interface_name retrans-interval interval%% ​ |  %%no change%% ​ |
 +|  %%ipv6 ospf interface interface_name transit-delay delay%% ​ |  %%no change%% ​ |
 +|  %%show ipv6 ospf%% ​ |  %%no change%% ​ |
 +|  %%show ipv6 ospf border-routers [area area_id] [router router_id]%% ​ |  %%no change%% ​ |
 +|  %%show ipv6 ospf host [ipv6_address]%% ​ |  %%no change%% ​ |
 +|  %%show ipv6 ospf lsdb [area area_id] [rtr | net | netsum | asbrsum] [linkstate-id ls_id] [router-id router_id]%% ​ |  %%no change%% ​ |
 +|  %%show ipv6 ospf neighbor [router ipv4_address][interface interface_name]%% ​ |  %%no change%% ​ |
 +|  %%show ipv6 ospf routes [prefix ipv6_address_prefix][gateway gateway]%% ​ |  %%no change%% ​ |
 +|  %%show ipv6 ospf virtual-link [router_id]%% ​ |  %%no change%% ​ |
 +|  %%show ipv6 ospf area [area_id]%% ​ |  %%no change%% ​ |
 +|  %%show ipv6 ospf interface [interface_name]%% ​ |  %%no change%% ​ |
 +===== PIM =====
 +^  6.4.2.R01 Command ​ ^  7.1.1.R01 Command ​ ^
 +|  %%%%  |  %%Optional VRF Prefix added to all IPv4(ip) cmds [vrf {vrf_name}]%% ​ |
 +|  %%ip load pim%%  |  %%no change%% ​ |
 +|  %%ip pim sparse status {enable | disable}%% ​ |  %%ip pim sparse admin-state {enable | disable}%% ​ |
 +|  %%ip pim dense status {enable | disable}%% ​ |  %%ip pim dense admin-state {enable | disable}%% ​ |
 +|  %%ip pim static-rp group_address/​prefix_length rp_address [[no] override] [priority priority]%% ​ |  %%no change%% ​ |
 +|  %%ip pim rp-threshold bps%%  |  %%no change%% ​ |
 +|  %%ip pim max-rps number%% ​ |  %%no change%% ​ |
 +|  %%ip pim probe-time seconds%% ​ |  %%no change%% ​ |
 +|  %%ip pim register checksum {header | full}%% ​ |  %%no change%% ​ |
 +|  %%ip pim register-suppress-timeout seconds%% ​ |  %%no change%% ​ |
 +|  %%ip pim spt status {enable | disable}%% ​ |  %%ip pim spt admin-state {enable | disable}%% ​ |
 +|  %%ip pim state-refresh-interval seconds%% ​ |  %%no change%% ​ |
 +|  %%ip pim state-refresh- limit ticks%% ​ |  %%no change%% ​ |
 +|  %%ip pim state-refresh- ttl num%%  |  %%no change%% ​ |
 +|  %%show ip pim sparse%% ​ |  %%no change%% ​ |
 +|  %%show ip pim dense%% ​ |  %%no change%% ​ |
 +|  %%show ip pim neighbor [ip_address]%% ​ |  %%no change%% ​ |
 +|  %%show ip pim candidate-rp%% ​ |  %%no change%% ​ |
 +|  %%show ip pim group-map [bsr | static-rp | ssm | dense]%% ​ |  %%no change%% ​ |
 +|  %%show ip pim interface [if_name]%% ​ |  %%no change%% ​ |
 +|  %%show ip pim static-rp%% ​ |  %%no change%% ​ |
 +|  %%ipv6 pim sparse status {enable | disable}%% ​ |  %%ipv6 pim sparse admin-state {enable | disable}%% ​ |
 +|  %%ipv6 pim dense status {enable | disable}%% ​ |  %%ipv6 pim dense admin-state {enable | disable}%% ​ |
 +|  %%ipv6 pim cbsr bsr_address [priority bsr_priority] [mask-length masklen] [scope scope_value]%% ​ |  %%no change%% ​ |
 +|  %%no ipv6 pim cbsr bsr_address [priority bsr_priority] [mask-length masklen] [scope scope_value]%% ​ |  %%no change%% ​ |
 +|  %%ipv6 pim static-rp group_address/​prefix_length rp_address [[no] override] [priority priority]%% ​ |  %%no change%% ​ |
 +|  %%ipv6 pim spt status {enable | disable}%% ​ |  %%ipv6 pim spt admin-state {enable | disable}%% ​ |
 +|  %%show ipv6 pim neighbor [ipv6_address] [if_name]%% ​ |  %%no change%% ​ |
 +|  %%show ipv6 pim cbsr [scope scope_value]%% ​ |  %%no change%% ​ |
 +|  %%show ipv6 pim bsr [scope scope_value]%% ​ |  %%no change%% ​ |
 +|  %%ip pim interface%% ​ |  %%no change%% ​ |
 +|  %%ip pim cbsr%% ​ |  %%no change%% ​ |
 +|  %%ip pim dense group%% ​ |  %%no change%% ​ |
 +|  %%ip pim ssm group%% ​ |  %%no change%% ​ |
 +|  %%ip pim candidate-rp%% ​ |  %%no change%% ​ |
 +|  %%ip pim invalid-joinprune-notification-period%% ​ |  %%no change%% ​ |
 +|  %%ip pim invalid-register-notification-period%% ​ |  %%no change%% ​ |
 +|  %%ip pim neighbor-loss-notification-period%% ​ |  %%no change%% ​ |
 +|  %%ip pim invalid-rp-mapping-notification-period%% ​ |  %%no change%% ​ |
 +|  %%ip pim keepalive period%% ​ |  %%no change%% ​ |
 +|  %%ipv6 pim interface%% ​ |  %%no change%% ​ |
 +|  %%ipv6 pim candidate-rp%% ​ |  %%no change%% ​ |
 +|  %%ipv6 pim dense group%% ​ |  %%no change%% ​ |
 +|  %%ipv6 pim ssm group%% ​ |  %%no change%% ​ |
 +|  %%ipv6 pim rp-switchover%% ​ |  %%no change%% ​ |
 +|  %%show ip pim bsr%%  |  %%no change%% ​ |
 +|  %%show ip pim cbsr%% ​ |  %%no change%% ​ |
 +|  %%show ip pim dense group%% ​ |  %%no change%% ​ |
 +|  %%show ip pim ssm group%% ​ |  %%no change%% ​ |
 +|  %%show ip pim groute%% ​ |  %%no change%% ​ |
 +|  %%show ip pim sgroute%% ​ |  %%no change%% ​ |
 +|  %%show ip pim notifications%% ​ |  %%no change%% ​ |
 +|  %%show ipv6 pim sparse%% ​ |  %%no change%% ​ |
 +|  %%show ipv6 pim dense%% ​ |  %%no change%% ​ |
 +|  %%show ipv6 pim interface%% ​ |  %%no change%% ​ |
 +|  %%show ipv6 pim candidate-rp%% ​ |  %%no change%% ​ |
 +|  %%show ipv6 pim static-rp%% ​ |  %%no change%% ​ |
 +|  %%show ipv6 pim group-map%% ​ |  %%no change%% ​ |
 +|  %%show ipv6 pim dense group%% ​ |  %%no change%% ​ |
 +|  %%show ipv6 pim ssm group%% ​ |  %%no change%% ​ |
 +|  %%show ipv6 pim groute%% ​ |  %%no change%% ​ |
 +|  %%show ipv6 pim sgroute%% ​ |  %%no change%% ​ |
 +===== PMM =====
 +^  6.4.2.R01 Command ​ ^  7.1.1.R01 Command ​ ^
 +|  %%port mirroring port_mirror_sessionid [no] source slot/​port[-port2] [slot/​port[-port2]...] destination slot/port [rpmir-vlan vlan_id] [bidirectional |inport |outport] [unblocked vlan_id] [enable | disable]%% ​ |  %%port-mirroring <​port_mirror_sessionid>​ [no] source {<​slot/​port[-port2] [slot/​port[-port2]...]>​} destination <​slot/​port>​ [rpmir-vlan <​vlan_id>​] [bidirectional | inport | outport] [unblocked-vlan <​vlan_id>​] [enable | disable]%% ​ |
 +|  %%port mirroring port_mirror_sessionid {enable | disable}%% ​ |  %%port-mirroring <​port_mirror_sessionid>​ {enable | disable}%% ​ |
 +|  %%no port mirroring port_mirror_sessionid%% ​ |  %%no port-mirroring <​port_mirror_sessionid>​ %%  |
 +|  %%port monitoring port_monitor_sessionid source slot/port [{no file | file filename [size filesize] | [overwrite {on | off}]}] [inport | outport | bidirectional] [timeout seconds] [enable | disable]%% ​ |  %%port-monitoring <​port_monitor_sessionid>​ source <​slot/​port>​ [{no file | file <​filename>​ [size <​filesize>​] | [overwrite {on | off}]}] [inport | outport | bidirectional] [timeout <​seconds>​] [enable | disable] [capture-type {full | brief}]%% ​ |
 +|  %%port monitoring port_monitor_sessionid {disable | pause | resume}%% ​ |  %%port-monitoring <​port_monitor_sessionid>​ {disable | pause | resume}%% ​ |
 +|  %%no port monitoring port_monitor_sessionid%% ​ |  %%no port-monitoring <​port_monitor_sessionid>​%% ​ |
 +|  %%show port mirroring status [port_mirror_sessionid]%% ​ |  %%show port-mirroring status [<​port_mirror_sessionid>​]%% ​ |
 +|  %%show port monitoring status [port_monitor_sessionid]%% ​ |  %%show port-monitoring status [<​port_monitor_sessionid>​]%% ​ |
 +|  %%show port monitoring file [port_monitor_sessionid]%% ​ |  %%show port-monitoring file [<​port_monitor_sessionid>​]%% ​ |
 +===== POLICY-SERVER =====
 +^  6.4.2.R01 Command ​ ^  7.1.1.R01 Command ​ ^
 +|  %%policy server load%% ​ |  %%no change%% ​ |
 +|  %%policy server flush%% ​ |  %%no change%% ​ |
 +|  %%policy server ip_address [port port_number] [preference preference] [user user_name password password] [searchbase search_string] [ssl | no ssl]%% ​ |  %%no change%% ​ |
 +|  %%policy server ip_address admin {up | down}%% ​ |  %%policy server ip_address admin-state {enable | disable}%% ​ |
 +|  %%no policy server ip_address [port port_number]%% ​ |  %%no change%% ​ |
 +|  %%show policy server%% ​ |  %%no change%% ​ |
 +|  %%show policy server long%% ​ |  %%no change%% ​ |
 +|  %%show policy server statistics%% ​ |  %%no change%% ​ |
 +|  %%show policy server rules%% ​ |  %%no change%% ​ |
 +|  %%show policy server events%% ​ |  %%no change%% ​ |
 +===== PORT-MANAGER =====
 +^  6.4.2.R01 Command ​ ^  7.1.1.R01 Command ​ ^
 +|  %%new command%% ​ |  %%SHOW VIOLATION [port <​slot/​port[-port]>​ | linkagg <​aggnum[-aggnum]>​]%% ​ |
 +|  %%new command%% ​ |  %%CLEAR VIOLATION {port <​slot/​port[-port]>​ | linkagg <​aggnum[-aggnum]>​}%% ​ |
 +===== PORT-MAPPING =====
 +^  6.4.2.R01 Command ​ ^  7.1.1.R01 Command ​ ^
 +|  %%port mapping port_mapping_sessionid {enable | disable}%% ​ |  %%port-mapping <​port_mapping_sessionid>​ {enable | disable}%% ​ |
 +|  %%no port mapping port_mapping_sessionid%% ​ |  %%no port-mapping <​port_mapping_sessionid>​%% ​ |
 +|  %%port mapping session id unknown-unicast-flooding {enable | disable}%% ​ |  %%port-mapping <​sessionid>​ unknown-unicast-flooding {enable | disable}%% ​ |
 +|  %%show port mapping [port_mapping_sessionid]%% ​ |  %%show port-mapping [<​port_mapping_sessionid>​]%% ​ |
 +|  %%port mapping <id> {unknown-unicast-flooding {enable | disable} | unidirectional | bidirectional}%% ​ |  %%port-mapping <id> {unknown-unicast-flooding {enable | disable} | unidirectional | bidirectional}%% ​ |
 +|  %%port mapping <id> [user-port {<​slot/​port[-port]>​ | linkagg <​agg_id>​ | slot <​slot_id>​] [network-port {<​slot/​port[-port]>​ | linkagg <​agg_id>​ | slot <​slot_id>​]%% ​ |  %%port-mapping <id> [user-port {<​slot/​port[-port]>​ | linkagg <​agg_id>​ | slot <​slot_id>​] [network-port {<​slot/​port[-port]>​ | linkagg <​agg_id>​ | slot <​slot_id>​]%% ​ |
 +|  %%port mapping <id> [no user-port {<​slot/​port[-port]>​ | linkagg <​agg_id>​ | slot <​slot_id>​] [no network-port {<​slot/​port[-port]>​ | linkagg <​agg_id>​ | slot <​slot_id>​]%% ​ |  %%no port-mapping <id> [user-port {<​slot/​port[-port]>​ | linkagg <​agg_id>​ | slot <​slot_id>​] [network-port {<​slot/​port[-port]>​ | linkagg <​agg_id>​ | slot <​slot_id>​]%% ​ |
 +===== PORT-SECURITY =====
 +^  6.4.2.R01 Command ​ ^  7.1.1.R01 Command ​ ^
 +|  %%port-security {slot/​port[-port2] | chassis} [enable | disable]%% ​ |  %%port-security {port <​slot/​port[-port2]>​ | chassis} [learning-enable | learning-disable]%% ​ |
 +|  %%no port security slot/​port[-port2]%% ​ |  %%no port security {port <​slot/​port[-port2]>​}%% ​ |
 +|  %%port-security shutdown minutes [convert-to-static {enable | disable}]%% ​ |  %%port-security learning-window <​minutes>​ [convert-to-static {enable | disable}]%% ​ |
 +|  %%port-security shutdown 0%%  |  %%no port-security learning-window %%  |
 +|  %%port-security slot/​port[-port2] maximum number%% ​ |  %%port-security port <​slot/​port[-port2]>​ maximum <​number>​%% ​ |
 +|  %%port-security slot/​port[-port2] max-filtering number%% ​ |  %%port-security port <​slot/​port[-port2]>​ max-filtering <​number>​%% ​ |
 +|  %%port-security {slot/​port[-port2] | chassis} convert-to-static%% ​ |  %%port-security {port <​slot/​port[-port2]>​ | chassis} convert-to-static%% ​ |
 +|  %%port-security slot/port mac mac_address [vlan vlan_id]%% ​ |  %%removed%% ​ |
 +|  %%port-security slot/port no mac {all | mac_address} [vlan vlan_id]%% ​ |  %%removed%% ​ |
 +|  %%port-security slot/​port[-port2] mac-range [low mac_address | high mac_address | low mac_address high mac_address]%% ​ |  %%port-security port <​slot/​port[-port2]>​ mac-range [low mac_address | high mac_address | low mac_address high mac_address]%% ​ |
 +|  %%port-security slot/​port[-port2] violation {restrict | shutdown}%% ​ |  %%port-security port <​slot/​port[-port2]>​ violation {restrict | shutdown}%% ​ |
 +|  %%port-security slot/port release%% ​ |  %%removed%% ​ |
 +|  %%port-security slot/​port[-port2] learn-trap-threshold <​number>​%% ​ |  %%port-security port <​slot/​port[-port2]>​ learn-trap-threshold <​number>​%% ​ |
 +|  %%show port-security [slot/​port[-port2] | slot]%% ​ |  %%show port-security [port <​slot/​port[-port2]>​ | slot <​slot>​]%% ​ |
 +|  %%show port-security shutdown%% ​ |  %%show port-security learning-window%% ​ |
 +===== QOS =====
 +^  6.4.2.R01 Command ​ ^  7.1.1.R01 Command ​ ^
 +|  %%qos {enable | disable}%% ​ |  %%no change%% ​ |
 +|  %%qos trust ports%% ​ |  %%qos trust-ports%% ​ |
 +|  %%qos no trust ports%% ​ |  %%qos no trust-ports%% ​ |
 +|  %%qos default servicing mode {strict-priority | wrr [w0 w1 w2 w3 w4 w5 w6 w7] | priority-wrr [w0 w1 w2 w3 w4 w5 w6 w7] | drr] [w0 w1 w2 w3 w4 w5 w6 w7]}%% ​ |  %%removed%% ​ |
 +|  %%qos forward log%%  |  %%no change%% ​ |
 +|  %%qos no forward log%%  |  %%no change%% ​ |
 +|  %%qos log console%% ​ |  %%no change%% ​ |
 +|  %%qos no log console%% ​ |  %%no change%% ​ |
 +|  %%qos log lines lines%% ​ |  %%no change%% ​ |
 +|  %%qos log level level%% ​ |  %%no change%% ​ |
 +|  %%qos clear log%%  |  %%clear qos log%%  |
 +|  %%qos [no] classifyl3 bridged%% ​ |  %%removed%% ​ |
 +|  %%qos [no] classify fragments%% ​ |  %%removed%% ​ |
 +|  %%qos default bridged disposition {accept | deny | drop}%% ​ |  %%removed%% ​ |
 +|  %%qos default routed disposition {accept | deny | drop}%% ​ |  %%removed%% ​ |
 +|  %%qos default multicast disposition {accept | deny | drop}%% ​ |  %%removed%% ​ |
 +|  %%qos stats interval seconds%% ​ |  %%no change%% ​ |
 +|  %%qos nms priority%% ​ |  %%removed%% ​ |
 +|  %%qos no nms priority%% ​ |  %%removed%% ​ |
 +|  %%qos phones [priority priority_value | trusted]%% ​ |  %%no change%% ​ |
 +|  %%qos no phones%% ​ |  %%no change%% ​ |
 +|  %%qos user-port {filter | shutdown} {spoof | bgp | bpdu | rip | ospf | vrrp | dvmrp | pim | isis | dhcpserver | dns-reply}%% ​ |  %%no change%% ​ |
 +|  %%qos no user-port {filter | shutdown}%% ​ |  %%no change%% ​ |
 +|  %%qos quarantine mac-group mac_group%% ​ |  %%no change%% ​ |
 +|  %%qos no quarantine mac-group%% ​ |  %%no change%% ​ |
 +|  %%qos quarantine path url%%  |  %%no change%% ​ |
 +|  %%qos no quarantine path%% ​ |  %%no change%% ​ |
 +|  %%qos quarantine page%% ​ |  %%no change%% ​ |
 +|  %%qos no quarantine page%% ​ |  %%no change%% ​ |
 +|  %%debug qos [info] [config] [rule] [main] [route] [port] [msg] [sl] [ioctl] [mem] [cam] [mapper] [flows] [queue] [slot] [l2] [l3] [classifier] [nat] [sem] [pm] [ingress] [egress]%% ​ |  %%no change%% ​ |
 +|  %%debug no qos [info] [config] [rule] [main] [route] [port] [msg] [sl] [ioctl] [mem] [cam] [mapper] [flows] [queue] [slot] [l2] [l3] [classifier] [nat] [sem] [pm] [ingress] [egress] %%  |  %%no change%% ​ |
 +|  %%debug qos internal <​input_string>​%% ​ |  %%no change%% ​ |
 +|  %%qos apply%% ​ |  %%no change%% ​ |
 +|  %%qos revert%% ​ |  %%no change%% ​ |
 +|  %%qos flush%% ​ |  %%no change%% ​ |
 +|  %%qos reset%% ​ |  %%no change%% ​ |
 +|  %%qos stats reset%% ​ |  %%no change%% ​ |
 +|  %%qos flow timeout%% ​ |  %%removed%% ​ |
 +|  %%qos fragment timeout%% ​ |  %%removed%% ​ |
 +|  %%qos port slot/port reset%% ​ |  %%qos port <​slot/​port[-port]>​ reset%% ​ |
 +|  %%qos port slot/port [enable | disable]%% ​ |  %%qos port <​slot/​port[-port]>​ [enable | disable]%% ​ |
 +|  %%qos port slot/port trusted%% ​ |  %%qos port <​slot/​port[-port]>​ trusted%% ​ |
 +|  %%qos port slot/port no trusted%% ​ |  %%qos port <​slot/​port[-port]>​ no trusted%% ​ |
 +|  %%qos port slot/port servicing mode {strict-priority | wrr [w0 w1 w2 w3 w4 w5 w6 w7] | prioritywrr [w0 w1 w2 w3 w4 w5 w6 w7] | drr [w0 w1 w2 w3 w4 w5 w6 w7] | default}%% ​ |  %%removed%% ​ |
 +|  %%qos port slot/port qn {minbw | maxbw} kbps%% ​ |  %%removed%% ​ |
 +|  %%qos port slot/port no qn {minbw | maxbw} kbps%% ​ |  %%removed%% ​ |
 +|  %%qos port slot/port maximum bandwidth bps%%  |  %%removed%% ​ |
 +|  %%qos port slot/port no maximum bandwidth%% ​ |  %%removed%% ​ |
 +|  %%qos port slot/port maximum egress-bandwidth bps%%  |  %%qos port <​slot/​port[-port]>​ maximum egress-bandwidth bps%%  |
 +|  %%qos port slot/port no maximum egress-bandwidth%% ​ |  %%qos port <​slot/​port[-port]>​ no maximum egress-bandwidth%% ​ |
 +|  %%qos port slot/port maximum ingress-bandwidth bps%%  |  %%qos port <​slot/​port[-port]>​ maximum ingress-bandwidth bps%%  |
 +|  %%qos port slot/port no maximum ingress-bandwidth%% ​ |  %%qos port <​slot/​port[-port]>​ no maximum ingress-bandwidth%% ​ |
 +|  %%qos port slot/port default 802.1p value%% ​ |  %%qos port <​slot/​port[-port]>​ default 802.1p value%% ​ |
 +|  %%qos port slot/port default dscp value%% ​ |  %%qos port <​slot/​port[-port]>​ default dscp value%% ​ |
 +|  %%qos port slot/port default classification {802.1p | dscp}%% ​ |  %%qos port <​slot/​port[-port]>​ default classification {802.1p | dscp}%% ​ |
 +|  %%qos port slot/port maximum [reserve | signal] bandwidth bps%%  |  %%removed%% ​ |
 +|  %%qos port slot/port no maximum [reserve | signal] bandwidth%% ​ |  %%removed%% ​ |
 +|  %%qos port slot/port maximum default buffers <​buf>​%% ​ |  %%qos port <​slot/​port[-port]>​ maximum depth <​val>​%% ​ |
 +|  %%qos port slot/port no maximum default depth%% ​ |  %%qos port <​slot/​port[-port]>​ no maximum depth%% ​ |
 +|  %%qos port slot/port maximum default buffers <​buf>​%% ​ |  %%removed%% ​ |
 +|  %%qos port slot/port no maximum default buffers%% ​ |  %%removed%% ​ |
 +|  %%show qos port [slot/port] [statistics]%% ​ |  %%removed%% ​ |
 +|  %%show qos queue%% ​ |  %%removed%% ​ |
 +|  %%show qos slice [slot/​slice]%% ​ |  %%no change%% ​ |
 +|  %%show qos log%%  |  %%no change%% ​ |
 +|  %%show qos config%% ​ |  %%no change%% ​ |
 +|  %%show qos statistics%% ​ |  %%no change%% ​ |
 +|  %%show qos classify%% ​ |  %%removed%% ​ |
 +|  %%policy import <​string>​%% ​ |  %%removed%% ​ |
 +|  %%policy rule rule_name [enable | disable] [from {ldap | cli}] [precedence precedence] [condition condition] [action action] [validity period name | no validity period] [save] [log [log-interval seconds]] [count {packets | bytes}] [trap | no trap] [default-list | no default-list]%% ​ |  %%policy rule <​rule_name>​ [enable | disable] [from {ldap | cli}] [precedence <​precedence>​] [condition <​condition>​] [action <​action>​] [validity-period <​name>​ | no validity-period] [save] [log [log-interval <​seconds>​]] [count {packets | bytes}] [trap | no-trap] [default-list]%% ​ |
 +|  %%no policy rule rule_name%% ​ |  %%no change%% ​ |
 +|  %%policy rule rule_name no {reflexive | save | log | default-list | trap | validity-period}%% ​ |  %%no change%% ​ |
 +|  %%policy validity period name [[no] days days] [[no] months months] [[no] hours hh:mm to hh:mm | no hours] [interval mm:dd:yyyy hh:mm to mm:dd:yyyy hh:mm | no interval]%% ​ |  %%policy validity-period <​name>​ [from {ldap | cli} | days <​days>​ | months <​months>​ | hours <​hh:​mm>​ to <​hh:​mm>​ | interval <​mm:​dd:​yyyy>​ <​hh:​mm>​ to <​mm:​dd:​yyyy>​ <​hh:​mm>​]%% ​ |
 +|  %%syntax for command above%% ​ |  %%policy validity-period <​name>​ no {hours | interval | days <​days>​ | months <​months>​}%% ​ |
 +|  %%no policy validity period name%% ​ |  %%no policy validity-period <​name>​%% ​ |
 +|  %%policy list list_name [type {unp | vrf | ingress | egress | slb}] [from {ldap | cli}] [enable | disable] [rules rule_name [rule_name2...]]%% ​ |  %%no change%% ​ |
 +|  %%policy list list_name [type {unp | vrf | ingress | egress | slb}] [from {ldap | cli}] [enable | disable] no [rules rule_name [rule_name2...]]%% ​ |  %%no change%% ​ |
 +|  %%no policy list list_name%% ​ |  %%no change%% ​ |
 +|  %%policy list list_name no rules rule_name [rule_name2...]%% ​ |  %%no change%% ​ |
 +|  %%policy network group net_group ip_address [from ldap | from cli] [mask net_mask] [ip_address2 [mask net_mask2]...]%% ​ |  %%no change%% ​ |
 +|  %%no policy network group net_group%% ​ |  %%no change%% ​ |
 +|  %%policy network group net_group [from ldap | from cli] no ip_address [mask netmask] [ip_address2 [mask net_mask2]...]%% ​ |  %%no change%% ​ |
 +|  %%policy service group service_group [from ldap | from cli] service_name1 [service_name2...]%% ​ |  %%no change%% ​ |
 +|  %%no policy service group service_group%% ​ |  %%no change%% ​ |
 +|  %%policy service group service_group [from ldap | from cli] no service_name1 [service_name2...]%% ​ |  %%no change%% ​ |
 +|  %%policy mac group mac_group [from ldap | from cli] mac_address [mask mac_mask] [mac_address2 [mask mac_mask2]...]%% ​ |  %%no change%% ​ |
 +|  %%no policy mac group mac_group%% ​ |  %%no change%% ​ |
 +|  %%policy mac group mac_group [from ldap | from cli] no mac_address [mask mac_mask] [mac_address2 [mask mac_mask2]...]%% ​ |  %%no change%% ​ |
 +|  %%policy port group group_name [from ldap | from cli] slot/​port[-port] [slot/​port[-port]...]%% ​ |  %%no change%% ​ |
 +|  %%no policy port group group_name%% ​ |  %%no change%% ​ |
 +|  %%policy port group group_name [from ldap | from cli] no slot/​port[-port] [slot/​port[-port]...]%% ​ |  %%no change%% ​ |
 +|  %%policy map group map_group [from ldap | from cli] {value1:​value2...}%% ​ |  %%no change%% ​ |
 +|  %%no policy map group map_group%% ​ |  %%no change%% ​ |
 +|  %%policy map group [from ldap | from cli] no {value1:​value2...}%% ​ |  %%no change%% ​ |
 +|  %%policy service service_name%% ​ |  %%no change%% ​ |
 +|  %%no policy service service_name%% ​ |  %%no change%% ​ |
 +|  %%policy service service_name protocol protocol {[source ip port port[-port]] [destination ip port port[-port]]}%% ​ |  %%policy service <​service_name>​ protocol <​protocol>​ {[source ip-port <​port[-port]>​] [destination ip-port <​port[-port]>​]}%% ​ |
 +|  %%policy service service_name [no source ip port] [no destination ip port]%% ​ |  %%policy service <​service_name>​ no {[source ip-port] [destination ip-port]}%% ​ |
 +|  %%policy service service_name source tcp port port[-port]%% ​ |  %%policy service <​service_name>​ source tcp-port <​port[-port]>​%% ​ |
 +|  %%policy service service_name no source tcp port%% ​ |  %%policy service <​service_name>​ no source tcp-port%% ​ |
 +|  %%policy service service_name destination tcp port port[-port]%% ​ |  %%policy service <​service_name>​ destination tcp-port <​port[-port]>​%% ​ |
 +|  %%policy service service_name no destination tcp port%% ​ |  %%policy service <​service_name>​ no destination tcp-port%% ​ |
 +|  %%policy service service_name source udp port port[-port]%% ​ |  %%policy service <​service_name>​ source udp-port <​port[-port]>​%% ​ |
 +|  %%policy service service_name no source udp port%% ​ |  %%policy service <​service_name>​ no source udp-port%% ​ |
 +|  %%policy service service_name destination udp port port[-port]%% ​ |  %%policy service <​service_name>​ destination udp-port <​port[-port]>​%% ​ |
 +|  %%policy service service_name no destination udp port%% ​ |  %%policy service <​service_name>​ no destination udp-port%% ​ |
 +|  %%policy condition condition_name%% ​ |  %%no change%% ​ |
 +|  %%no policy condition condition_name%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name source ip ip_address [mask netmask]%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name no source ip%%  |  %%no change%% ​ |
 +|  %%policy condition condition_name source ipv6 {any | ipv6_address [mask netmask]}%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name no source ipv6%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name destination ip ip_address [mask netmask]%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name no destination ip%%  |  %%no change%% ​ |
 +|  %%policy condition condition_name destination ipv6 {any | ipv6_address [mask netmask]}%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name no destination ipv6%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name multicast ip ip_address [mask netmask]%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name no multicast ip%%  |  %%no change%% ​ |
 +|  %%policy condition condition_name multicast ipv6 ip_address [mask netmask]%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name no multicast ipv6%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name source network group network_group%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name no source network group%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name destination network group network_group%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name no destination network group%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name multicast network group multicast_group%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name no multicast network group%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name source ip port port[-port]%% ​ |  %%policy condition <​condition_name>​ source ip-port <​port[-port]>​%% ​ |
 +|  %%policy condition condition_name no source ip port%% ​ |  %%policy condition <​condition_name>​ no source ip-port%% ​ |
 +|  %%policy condition condition_name destination ip port port[-port]%% ​ |  %%policy condition <​condition_name>​ destination ip-port <​port[-port]>​%% ​ |
 +|  %%policy condition condition_name no destination ip port%% ​ |  %%policy condition <​condition_name>​ no destination ip-port%% ​ |
 +|  %%policy condition condition_name source tcp port port[-port]%% ​ |  %%policy condition <​condition_name>​ source tcp-port <​port[-port]>​%% ​ |
 +|  %%policy condition condition_name no source tcp port%% ​ |  %%policy condition <​condition_name>​ no source tcp-port%% ​ |
 +|  %%policy condition condition_name destination tcp port port[-port]%% ​ |  %%policy condition <​condition_name>​ destination tcp-port <​port[-port]>​%% ​ |
 +|  %%policy condition condition_name no destination tcp port%% ​ |  %%policy condition <​condition_name>​ no destination tcp-port%% ​ |
 +|  %%policy condition condition_name source udp port port[-port]%% ​ |  %%policy condition <​condition_name>​ source udp-port <​port[-port]>​%% ​ |
 +|  %%policy condition condition_name no source udp port%% ​ |  %%policy condition <​condition_name>​ no source udp-port%% ​ |
 +|  %%policy condition condition_name destination udp port port[-port]%% ​ |  %%policy condition <​condition_name>​ destination udp-port <​port[-port]>​%% ​ |
 +|  %%policy condition condition_name no destination udp port%% ​ |  %%policy condition <​condition_name>​ no destination udp-port%% ​ |
 +|  %%policy condition condition_name ethertype etype%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name no ethertype%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name established%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name no established%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name tcpflags [any | all] {F | S | R | P | A | U | E | W} mask {F | S | R | P | A | U | E | W}%%  |  %%no change%% ​ |
 +|  %%policy condition condition_name no tcpflags%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name service service_name%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name no service%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name service group service_group%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name no service group%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name icmptype type%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name no icmptype%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name icmpcode code%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name no icmpcode%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name ip protocol protocol%% ​ |  %%policy condition <​condition_name>​ ip-protocol <​protocol>​%% ​ |
 +|  %%policy condition condition_name no ip protocol%% ​ |  %%policy condition <​condition_name>​ no ip-protocol%% ​ |
 +|  %%policy condition condition_name ipv6%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name no ipv6%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name nh next_header_value%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name no nh%%  |  %%no change%% ​ |
 +|  %%policy condition condition_name flow-label flow_label_value%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name no flow-label%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name tos tos_value [mask tos_mask]%% ​ |  %%no change%% ​ |
 +|  %%policy condition conditioning no tos%%  |  %%no change%% ​ |
 +|  %%policy condition condition_name dscp {dscp_value[-value]} [mask dscp_mask]%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name no dscp%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name source mac mac_address [mask mac_mask]%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name no source mac%%  |  %%no change%% ​ |
 +|  %%policy condition condition_name destination mac mac_address [mask mac_mask]%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name no destination mac%%  |  %%no change%% ​ |
 +|  %%policy condition condition_name source mac group group_name%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name no source mac group%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name destination mac group mac_group%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name no destination mac group%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name source vlan vlan_id%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name no source vlan%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name inner source vlan vlan_id%% ​ |  %%policy condition <​condition_name>​ inner source-vlan <​vlan_id>​%% ​ |
 +|  %%policy condition condition_name no inner source vlan%% ​ |  %%policy condition <​condition_name>​ no inner source-vlan%% ​ |
 +|  %%policy condition condition_name destination vlan vlan_id%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name no destination vlan%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name 802.1p 802.1p_value%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name no 802.1p%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name inner 802.1p 802.1p_value%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name no inner 802.1p%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name source port slot/​port[-port]%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name no source port%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name destination port slot/​port[-port]%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name no destination port%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name source port group group_name%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name no source port group%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name destination port group group_name%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name no destination port group%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name vrf {vrf_name | default}%% ​ |  %%no change%% ​ |
 +|  %%policy condition condition_name no vrf%%  |  %%no change%% ​ |
 +|  %%policy condition condition_name source interface type [ethernet | wan | ethernet-10 | ethernet-100 | ethernet-1G | ethernet-10G]%% ​ |  %%removed%% ​ |
 +|  %%policy condition condition_name no source interface type%% ​ |  %%removed%% ​ |
 +|  %%policy condition condition_name destination interface type [ethernet | wan | ethernet-10 | ethernet-100 | ethernet-1G | ethernet-10G]%% ​ |  %%removed%% ​ |
 +|  %%policy condition condition_name no destination interface type%% ​ |  %%removed%% ​ |
 +|  %%new command%% ​ |  %%policy condition <​condition_name>​ [no] fragments%% ​ |
 +|  %%policy action action_name%% ​ |  %%no change%% ​ |
 +|  %%policy no action action_name%% ​ |  %%no change%% ​ |
 +|  %%policy action action_name disposition {accept | drop | deny}%% ​ |  %%no change%% ​ |
 +|  %%policy action action_name no disposition%% ​ |  %%no change%% ​ |
 +|  %%policy action action_name shared%% ​ |  %%no change%% ​ |
 +|  %%policy action action_name no shared%% ​ |  %%no change%% ​ |
 +|  %%policy action action_name priority priority_value%% ​ |  %%no change%% ​ |
 +|  %%policy action action_name no priority%% ​ |  %%no change%% ​ |
 +|  %%policy action action_name maximum bandwidth bps%%  |  %%no change%% ​ |
 +|  %%policy action action_name no maximum bandwidth%% ​ |  %%no change%% ​ |
 +|  %%policy action action_name minimum bandwidth bps%%  |  %%removed%% ​ |
 +|  %%policy action action_name no minimum bandwidth%% ​ |  %%removed%% ​ |
 +|  %%policy action action_name maximum depth bytes%% ​ |  %%no change%% ​ |
 +|  %%policy action action_name no maximum depth%% ​ |  %%no change%% ​ |
 +|  %%policy action action_name maximum buffers val%%  |  %%removed%% ​ |
 +|  %%policy action action_name no maximum buffers%% ​ |  %%removed%% ​ |
 +|  %%policy action action_name minimum buffers val%%  |  %%no change%% ​ |
 +|  %%policy action action_name no minimum buffers%% ​ |  %%no change%% ​ |
 +|  %%policy action action_name minimum depth bytes%% ​ |  %%removed%% ​ |
 +|  %%policy action action_name no minimum depth%% ​ |  %%removed%% ​ |
 +|  %%policy action action_name tos tos_value%% ​ |  %%no change%% ​ |
 +|  %%policy action action_name no tos%%  |  %%no change%% ​ |
 +|  %%policy action action_name 802.1p 802.1p_value%% ​ |  %%no change%% ​ |
 +|  %%policy action action_name no 802.1p%% ​ |  %%no change%% ​ |
 +|  %%policy action action_name dscp dscp_value%% ​ |  %%no change%% ​ |
 +|  %%policy action action_name no dscp%% ​ |  %%no change%% ​ |
 +|  %%policy action map {802.1p | tos | dscp} to {802.1p | tos| dscp} using map_group%% ​ |  %%no change%% ​ |
 +|  %%policy action no map%%  |  %%no change%% ​ |
 +|  %%policy action action_name permanent gateway ip ip_address%% ​ |  %%policy action <​action_name>​ permanent gateway-ip <​ip_address>​%% ​ |
 +|  %%policy action action_name no permanent gateway ip%%  |  %%policy action <​action_name>​ no permanent gateway-ip%% ​ |
 +|  %%policy action action_name alternate gateway ip ip_address%% ​ |  %%removed%% ​ |
 +|  %%policy action action_name no alternate gateway ip%%  |  %%removed%% ​ |
 +|  %%policy action action_name port-disable%% ​ |  %%no change%% ​ |
 +|  %%policy action action_name no port-disable%% ​ |  %%no change%% ​ |
 +|  %%policy action action_name redirect port slot/​port%% ​ |  %%no change%% ​ |
 +|  %%policy action action_name no redirect port%% ​ |  %%no change%% ​ |
 +|  %%policy action action_name redirect linkagg link_agg%% ​ |  %%no change%% ​ |
 +|  %%policy action action_name no redirect linkagg%% ​ |  %%no change%% ​ |
 +|  %%policy action action_name no-cache%% ​ |  %%no change%% ​ |
 +|  %%policy action action_name no no-cache%% ​ |  %%no change%% ​ |
 +|  %%policy action action_name [ingress | egress | ingress egress] mirror slot/​port%% ​ |  %%no change%% ​ |
 +|  %%policy action action_name no mirror%% ​ |  %%no change%% ​ |
 +|  %%new command%% ​ |  %%policy action <​action_name>​ {pir <​rate>​ | pbs <​size>​ | cir <​rate>​ | cbs <​size>​ | cpu-priority <​0-7>​}%% ​ |
 +|  %%new command parameter%% ​ |  %%policy action <​action_name> ​ cir <​rate>​ cbs <​size>​ [[no] color-only]}%% ​ |
 +|  %%new command parameter%% ​ |  %%policy action <​action_name> ​ cir <​rate>​ cbs <​size>​ pir <​rate>​ pbs <​size>​ [[no] color-only]}%% ​ |
 +|  %%show policy classify {l2 | l3 | multicast} [applied]%% ​ |  %%no change%% ​ |
 +|  %%show policy classify {l2 | l3 | multicast} [applied] source port slot/​port%% ​ |  %%no change%% ​ |
 +|  %%show policy classify {l2 | l3 | multicast} [applied] destination port slot/​port%% ​ |  %%no change%% ​ |
 +|  %%show policy classify {l2 | l3 | multicast} [applied] source mac mac_address%% ​ |  %%no change%% ​ |
 +|  %%show policy classify {l2 | l3 | multicast} [applied] destination mac mac_address%% ​ |  %%no change%% ​ |
 +|  %%show policy classify {l2 | l3 | multicast} [applied] source vlan vlan_id%% ​ |  %%no change%% ​ |
 +|  %%show policy classify {l2 | l3 | multicast} [applied] destination vlan vlan_id%% ​ |  %%no change%% ​ |
 +|  %%show policy classify {l2 | l3 | multicast} [applied] source interface type {ethernet | wan | ethernet-10 | ethernet-100 | ethernet-1G | ethernet-10G}%% ​ |  %%removed%% ​ |
 +|  %%show policy classify {l2 | l3 | multicast} [applied] destination interface type {ethernet | wan | ethernet-10 | ethernet-100 | ethernet-1G | ethernet-10G}%% ​ |  %%removed%% ​ |
 +|  %%show policy classify {l2 | l3 | multicast} [applied] source ip ip_address%% ​ |  %%no change%% ​ |
 +|  %%show policy classify {l2 | l3 | multicast} [applied] destination ip ip_address%% ​ |  %%no change%% ​ |
 +|  %%show policy classify {l2 | l3 | multicast} [applied] multicast ip ip_address%% ​ |  %%no change%% ​ |
 +|  %%show policy classify {l2 | l3 | multicast} [applied] tos tos_value%% ​ |  %%no change%% ​ |
 +|  %%show policy classify {l2 | l3 | multicast} [applied] dscp dscp_value%% ​ |  %%no change%% ​ |
 +|  %%show policy classify {l2 | l3 | multicast} [applied] 802.1p 802.1p_value%% ​ |  %%no change%% ​ |
 +|  %%show policy classify {l2 | l3 | multicast} [applied] ip protocol protocol%% ​ |  %%no change%% ​ |
 +|  %%show policy classify {l2 | l3 | multicast} [applied] source ip port port%% ​ |  %%no change%% ​ |
 +|  %%show policy classify {l2 | l3 | multicast} [applied] destination ip port port%% ​ |  %%no change%% ​ |
 +|  %%show policy classify {l2 | l3 | multicast} [applied] applied%% ​ |  %%no change%% ​ |
 +|  %%show [applied] policy network group [network_group]%% ​ |  %%no change%% ​ |
 +|  %%show [applied] policy service [service_name]%% ​ |  %%no change%% ​ |
 +|  %%show [expanded] [applied] policy service group [service_group]%% ​ |  %%no change%% ​ |
 +|  %%show [applied] policy mac group [mac_group]%% ​ |  %%no change%% ​ |
 +|  %%show [applied] policy port group [group_name]%% ​ |  %%no change%% ​ |
 +|  %%show [applied] policy map group [group_name]%% ​ |  %%no change%% ​ |
 +|  %%show [expanded | verbose] [applied] policy action [action_name]%% ​ |  %%no change%% ​ |
 +|  %%show [expanded | verbose] [applied] policy condition [condition_name]%% ​ |  %%no change%% ​ |
 +|  %%show [expanded | verbose] [applied | active] [bridged | routed | multicast] policy rule [rule_name]%% ​ |  %%no change%% ​ |
 +|  %%show policy validity period [name]%% ​ |  %%show policy validity-period [<​name>​]%% ​ |
 +|  %%show active policy list [list_name]%% ​ |  %%no change%% ​ |
 +|  %%show [applied] policy list [list_name]%% ​ |  %%no change%% ​ |
 +|  %%%%  |  %%%%  |
 +===== RIP =====
 +^  6.4.2.R01 Command ​ ^  7.1.1.R01 Command ​ ^
 +|  %%ip load rip%%  |  %%no change%% ​ |
 +|  %%ip rip status {enable | disable}%% ​ |  %%ip rip admin-state {enable | disable}%% ​ |
 +|  %%ip rip interface {interface_name}%% ​ |  %%no change%% ​ |
 +|  %%no ip rip interface {interface_name}%% ​ |  %%no change%% ​ |
 +|  %%ip rip interface {interface_name} status {enable | disable}%% ​ |  %%ip rip interface {interface_name} admin-state {enable | disable}%% ​ |
 +|  %%ip rip interface {interface_name} metric value%% ​ |  %%no change%% ​ |
 +|  %%ip rip interface {interface_name} send-version {none | v1 | v1compatible | v2}%%  |  %%no change%% ​ |
 +|  %%ip rip interface {interface_name} recv-version {v1 | v2 | both | none}%% ​ |  %%no change%% ​ |
 +|  %%ip rip force-holddowntimer seconds%% ​ |  %%no change%% ​ |
 +|  %%ip rip host-route%% ​ |  %%no change%% ​ |
 +|  %%no ip rip host-route%% ​ |  %%no change%% ​ |
 +|  %%ip rip route-tag value%% ​ |  %%no change%% ​ |
 +|  %%ip rip interface {interface_name} auth-type {none | simple | md5}%% ​ |  %%no change%% ​ |
 +|  %%ip rip interface {interface_name} auth-key string%% ​ |  %%no change%% ​ |
 +|  %%ip rip update-interval seconds%% ​ |  %%no change%% ​ |
 +|  %%ip rip invalid-timer seconds%% ​ |  %%no change%% ​ |
 +|  %%ip rip garbage-timer seconds%% ​ |  %%no change%% ​ |
 +|  %%ip rip holddown-timer seconds%% ​ |  %%no change%% ​ |
 +|  %%show ip rip%%  |  %%no change%% ​ |
 +|  %%show ip rip routes [ip_address ip_mask]%% ​ |  %%no change%% ​ |
 +|  %%show ip rip interface [interface_name]%% ​ |  %%no change%% ​ |
 +|  %%show ip rip peer [ip_address]%% ​ |  %%no change%% ​ |
 +|  %%new command%% ​ |  %%ip rip interface {interface_name} ingress-filter [filter_route_map_name]%% ​ |
 +|  %%new command%% ​ |  %%ip rip interface {interface_name} egress-filter [filter_route_map_name]%% ​ |
 +|  %%new command%% ​ |  %%no ip rip interface {interface_name} ingress-filter%% ​ |
 +|  %%new command%% ​ |  %%no ip rip interface {interface_name} egress-filter%% ​ |
 +===== SFLOW =====
 +^  6.4.2.R01 Command ​ ^  7.1.1.R01 Command ​ ^
 +|  %%sflow agent ip <​ip_address>​%% ​ |  %%no change%% ​ |
 +|  %%no sflow agent ip <​ip_address>​%% ​ |  %%no change%% ​ |
 +|  %%sflow receiver <num> [name <​string>​ | timeout {<​seconds>​ | forever} | address {<​ip_address>​ | <​ipv6address>​} | udp-port <​port>​ | packet-size <​size>​ | Version <​num>​]%% ​ |  %%sflow receiver <​receiver_index>​ {name <​string>​ | timeout {<​seconds>​ | forever} | address {<​ip_address>​ | <​ipv6address>​} | udp-port <​port>​ | packet-size <​size>​ Version <num> | release}%% ​ |
 +|  %%sflow receiver <​receiver_index>​ [release]%% ​ |  %%sflow receiver <​receiver_index>​ {name <​string>​ | timeout {<​seconds>​ | forever} | address {<​ip_address>​ | <​ipv6address>​} | udp-port <​port>​ | packet-size <​size>​ Version <num> | release}%% ​ |
 +|  %%sflow sampler <num> <​portlist>​ [receiver <​receiver_index>​ | rate <​value>​ | sample-hdr-size <​size>​]%% ​ |  %%sflow sampler <num> port <​slot/​port[-port]>​ {receiver <​receiver_index>​ | rate <​value>​ | sample-hdr-size <​size>​}%% ​ |
 +|  %%no sflow sampler <num> <​portlist>​%% ​ |  %%no change%% ​ |
 +|  %%sflow poller <num> <​portlist>​ [receiver <​receiver_index>​ | interval <​value>​]%% ​ |  %%sflow poller <num> port <​slot/​port[-port]>​ {receiver <​receiver_index>​ | interval <​value>​}%% ​ |
 +|  %%no sflow poller <num> <​portlist>​%% ​ |  %%no change%% ​ |
 +|  %%show sflow agent%% ​ |  %%no change%% ​ |
 +|  %%show sflow receiver [<​num>​]%% ​ |  %%no change%% ​ |
 +|  %%show sflow sampler [<​num>​]%% ​ |  %%no change%% ​ |
 +|  %%show sflow poller [<​num>​]%% ​ |  %%no change%% ​ |
 +===== SLB =====
 +^  6.4.2.R01 Command ​ ^  7.1.1.R01 Command ​ ^
 +|  %%ip slb admin {enable | disable}%% ​ |  %%ip slb admin-state {enable | disable}%% ​ |
 +|  %%ip slb reset statistics%% ​ |  %%no change%% ​ |
 +|  %%ip slb cluster name {vip ip_address | condition string} [l3 | l2]%%  |  %%no change%% ​ |
 +|  %%no ip slb cluster name%% ​ |  %%no change%% ​ |
 +|  %%ip slb cluster cluster_name admin status {enable | disable}%% ​ |  %%ip slb cluster <​cluster_name>​ admin-state {enable | disable}%% ​ |
 +|  %%ip slb cluster cluster_name ping period seconds%% ​ |  %%no change%% ​ |
 +|  %%ip slb cluster cluster_name ping timeout milliseconds%% ​ |  %%no change%% ​ |
 +|  %%ip slb cluster cluster_name ping retries count%% ​ |  %%no change%% ​ |
 +|  %%ip slb cluster cluster_name probe probe_name%% ​ |  %%no change%% ​ |
 +|  %%ip slb server ip ip_address cluster cluster_name [admin status {enable | disable}]%% ​ |  %%ip slb server ip <​ip_address>​ cluster <​cluster_name>​ [admin-state {enable | disable}]%% ​ |
 +|  %%no ip slb server ip ip_address cluster cluster_name%% ​ |  %%no change%% ​ |
 +|  %%ip slb server ip ip_address cluster cluster_name probe probe_name%% ​ |  %%no change%% ​ |
 +|  %%ip slb probe probe_name {ftp | http | https | imap | imaps | nntp | ping | pop | pops | smtp | tcp | udp}%% ​ |  %%no change%% ​ |
 +|  %%no ip slb probe probe_name%% ​ |  %%no change%% ​ |
 +|  %%ip slb probe probe_name {ftp | http | https | imap | imaps | nntp | ping | pop | pops | smtp | tcp | udp} timeout seconds%% ​ |  %%no change%% ​ |
 +|  %%ip slb probe probe_name {ftp | http | https | imap | imaps | nntp | ping | pop | pops | smtp | tcp | udp} period seconds%% ​ |  %%no change%% ​ |
 +|  %%ip slb probe probe_name {ftp | http | https | imap | imaps | nntp | ping | pop | pops | smtp | tcp | udp} port port_number%% ​ |  %%no change%% ​ |
 +|  %%ip slb probe probe_name {ftp | http | https | imap | imaps | nntp | ping | pop | pops | smtp | tcp | udp} retries retries%% ​ |  %%no change%% ​ |
 +|  %%ip slb probe probe_name {http | https} username user_name%% ​ |  %%no change%% ​ |
 +|  %%ip slb probe probe_name {http | https} password password%% ​ |  %%no change%% ​ |
 +|  %%ip slb probe probe_name {http | https} url url%%  |  %%no change%% ​ |
 +|  %%ip slb probe probe_name {http | https} status status_value%% ​ |  %%no change%% ​ |
 +|  %%ip slb probe probe_name {tcp | udp} send send_string%% ​ |  %%no change%% ​ |
 +|  %%ip slb probe probe_name {http | https | tcp | udp} expect expect_string%% ​ |  %%no change%% ​ |
 +|  %%show ip slb clusters [statistics]%% ​ |  %%no change%% ​ |
 +|  %%show ip slb cluster name [statistics]%% ​ |  %%no change%% ​ |
 +|  %%show ip slb cluster name server ip_address%% ​ |  %%no change%% ​ |
 +|  %%show ip slb servers%% ​ |  %%no change%% ​ |
 +|  %%show ip slb probes [probe_name]%% ​ |  %%no change%% ​ |
 +===== SNMP =====
 +^  6.4.2.R01 Command ​ ^  7.1.1.R01 Command ​ ^
 +|  %%SNMP SECURITY {NO SECURITY | AUTHENTICATION {SET | ALL} | PRIVACY {SET | ALL} | TRAP ONLY}%% ​ |  %%snmp security {no-security | authentication {set | all} | privacy {set | all} | trap-only}%% ​ |
 +|  %%SHOW SNMP SECURITY%% ​ |  %%no change%% ​ |
 +|  %%SHOW SNMP STATISTICS%% ​ |  %%no change%% ​ |
 +|  %%SHOW SNMP MIB FAMILY [<​string>​]%% ​ |  %%show snmp mib-family [<​string>​]%% ​ |
 +|  %%SNMP AUTHENTICATION TRAP {ENABLE | DISABLE}%% ​ |  %%snmp authentication-trap {enable | disable}%% ​ |
 +|  %%SHOW SNMP AUTHENTICATION TRAP%% ​ |  %%show snmp authentication-trap%% ​ |
 +|  %%SNMP COMMUNITY MAP MODE {ENABLE | DISABLE}%% ​ |  %%snmp community-map mode {enable | disable}%% ​ |
 +|  %%SNMP COMMUNITY MAP <map> {ENABLE | DISABLE}%% ​ |  %%snmp community-map <map> {enable | disable}%% ​ |
 +|  %%SNMP COMMUNITY MAP <map> USER <​user>​%% ​ |  %%snmp community-map <map> user <​user_name>​%% ​ |
 +|  %%SNMP COMMUNITY MAP <map> USER <​user>​ {ENABLE | DISABLE}%% ​ |  %%snmp community-map <map> user <​user_name>​ {enable | disable}%% ​ |
 +|  %%NO SNMP COMMUNITY MAP <​string>​%% ​ |  %%no snmp community-map <​map>​%% ​ |
 +|  %%SHOW SNMP COMMUNITY MAP%%  |  %%show snmp community-map%% ​ |
 +|  %%SHOW SNMP OBJECT NAME <​string>​%% ​ |  %%no change%% ​ |
 +|  %%SHOW SNMP OBJECT IDENTIFIER <​string>​%% ​ |  %%no change%% ​ |
 +|  %%SNMP SOURCE IP PREFERRED {DEFAULT | NO-LOOPBACK0 | <​ip_address>​}%% ​ |  %%snmp source-ip-preferred {default | no-loopback0 | <​ip_address>​}%% ​ |
 +|  %%NO SNMP SOURCE IP PREFERRED%% ​ |  %%no snmp source-ip-preferred%% ​ |
 +|  %%SNMP STATION <​ip_address>​ {<​port>​ | <​user_name>​ | V1 | V2 | V3 | ENABLE | DISABLE}+%% ​ |  %%no change%% ​ |
 +|  %%NO SNMP STATION <​ip_address>​%% ​ |  %%no change%% ​ |
 +|  %%SHOW SNMP STATION%% ​ |  %%no change%% ​ |
 +|  %%SNMP TRAP REPLAY <​ip_address>​ [<​seq_id>​]%% ​ |  %%snmp-trap replay-ip <​ip_address>​ [<​seq_id>​]%% ​ |
 +|  %%SNMP TRAP FILTER <​ip_address>​ {<​trap_id>​}+%% ​ |  %%snmp-trap filter-ip <​ip_address>​ {<​trap_id>​}+%% ​ |
 +|  %%NO SNMP TRAP FILTER <​ip_address>​ {<​trap_id>​}+%% ​ |  %%no snmp-trap filter-ip <​ip_address>​ {<​trap_id>​}+%% ​ |
 +|  %%SHOW SNMP TRAP FILTER%% ​ |  %%show snmp-trap filter-ip%% ​ |
 +|  %%SHOW SNMP TRAP REPLAY%% ​ |  %%show snmp-trap replay-ip%% ​ |
 +|  %%SHOW SNMP TRAP CONFIG%% ​ |  %%show snmp-trap config%% ​ |
 +|  %%SNMP TRAP ABSORPTION {ENABLE | DISABLE}%% ​ |  %%snmp-trap absorption {enable | disable}%% ​ |
 +|  %%SNMP TRAP TO WEBVIEW {ENABLE | DISABLE}%% ​ |  %%snmp-trap to-webview {enable | disable}%% ​ |
 +===== SOURCE LEARNING =====
 +^  6.4.2.R01 Command ​ ^  7.1.1.R01 Command ​ ^
 +|  %%mac-address-table [permanent] mac_address {slot/port | linkagg link_agg} vid [bridging | filtering] %%  |  %%mac-learning vlan <vid> {port <​slot/​port>​ | linkagg <​link_agg>​} static mac-address <​mac_address> ​ [bridging | filtering] %%  |
 +|  %%no mac-address-table [permanent | learned] [mac_address {slot/port | linkagg link_agg} vid] %%  |  %%no mac-learning [vlan <​vid>​] [port <​slot/​port>​ | linkagg <​link_agg>​] {static | dynamic} [mac-address <​mac_address>​] %%  |
 +|  %%mac-address-table static-multicast multicast_address {slot1/​port1[-port1a][slot2/​port2[| linkagg link_agg} vid %%  |  %%mac-learning vlan <vid> {port <​slot1/​port1[-port1]>​ <​[slot2/​port2]>​ | linkagg <​link_agg>​} ​ multicast mac-address <​multicast_address>​ [group <​groupid>​] %%  |
 +|  %%no mac-address-table static-multicast [<​mac_address> ​ {slot1/​port1[-port1a][slot2/​port2[| linkagg link_agg} vid]  %%  |  %%no mac-learning [vlan <​vid>​] [port <​slot1/​port1[-port1]>​ <​[slot2/​port2]>​ | linkagg <​link_agg>​] { multicast } [mac-address <​multicast_address>​] %%  |
 +|  %%source-learning {port <​slot/​port>​|linkagg <​agg_num>​} enable|disable %%  |  %%mac-learning {port <​slot/​port>​| linkagg <​link_agg>​} {enable|disable} %%  |
 +|  %%show source-learning [port slot/port | linkagg link_agg] %%  |  %%show mac-learning learning-state [slot <​slot>​ | port <​slot/​port>​ | linkagg <​link_agg>​] %%  |
 +|  %%show mac-address-table [permanent | learned | quarantined] [mac_address] [slot slot | slot/port] [linkagg link_agg][vid | vid1-vid2] %%  |  %%show mac-learning [summary] [multicast | static | dynamic] [vlan <​vid1[-vid2]>​] [slot <​slot>​ | port <​slot/​port>​] [linkagg <​link_agg>​] [mac-address <​mac_address>​] %%  |
 +|  %%show mac-address-table static-multicast [<​mac_addr>​] [slot slot | slot/port] [linkagg link_agg][vid | vid1-vid2] %%  |  %%already included in previous line %%  |
 +|  %%show mac-address-table count [mac_address] [slot slot | slot/port] [linkagg link_agg][vid | vid1-vid2] %%  |  %%already included in previous line %%  |
 +|  %%mac-address-table aging-time <​seconds>​ %%  |  %%mac-learning aging-time {<​seconds>​|default} %%  |
 +|  %%no mac-address-table aging-time %%  |  %%already included in previous line %%  |
 +|  %%source-learning chassis-distributed {enable|disable} %%  |  %%mac-learning mode [centralized | distributed] %%  |
 +|  %%show source-learning chassis-distributed %%  |  %%show mac-learning mode %%  |
 +===== STP =====
 +^  6.4.2.R01 Command ​ ^  7.1.1.R01 Command ​ ^
 +|  %%bridge mode {flat | 1x1}%% ​ |  %%spantree mode {flat | per-vlan}%% ​ |
 +|  %%bridge protocol {stp | rstp | mstp}%% ​ |  %%spantree protocol {stp | rstp | mstp}%% ​ |
 +|  %%bridge <​instance>​ protocol {stp | rstp | mstp}%% ​ |  %%removed%% ​ |
 +|  %%bridge cist protocol {stp | rstp | mstp}%% ​ |  %%spantree cist protocol {stp | rstp | mstp}%% ​ |
 +|  %%bridge 1x1 <vid> protocol {stp | rstp}%% ​ |  %%spantree ​ vlan <vid> protocol {stp | rstp}%% ​ |
 +|  %%bridge mst <​msti_id>​ region name <​name>​%% ​ |  %%spantree mst <​msti_id>​ region name <​name>​%% ​ |
 +|  %%bridge mst <​msti_id>​ region no name%% ​ |  %%no spantree mst <​msti_id>​ region name%% ​ |
 +|  %%bridge mst <​msti_id>​ region revision level <​rev_level>​%% ​ |  %%spantree mst <​msti_id>​ region revision-level <​rev_level>​%% ​ |
 +|  %%bridge mst <​msti_id>​ region max hops <​max_hops>​%% ​ |  %%spantree mst <​msti_id>​ region max-hops <​max_hops>​%% ​ |
 +|  %%bridge msti <​msti_id>​ [name <​name>​]%% ​ |  %%spantree msti <​msti_id>​ msti_id [name <​name>​]%% ​ |
 +|  %%bridge no msti <​msti_id>​%% ​ |  %%no spantree msti <​msti_id>​%% ​ |
 +|  %%bridge msti <​msti_id>​ no name%% ​ |  %%no spantree msti <​msti_id>​ name%% ​ |
 +|  %%bridge msti <​msti_id>​ vlan <​vid_range>​%% ​ |  %%spantree msti <​msti_id>​ vlan <​vid_range>​%% ​ |
 +|  %%bridge msti <​msti_id>​ no vlan <​vid_range>​%% ​ |  %%no spantree msti <​msti_id>​ vlan <​vid_range>​%% ​ |
 +|  %%bridge priority <​priority>​%% ​ |  %%spantree priority <​priority>​%% ​ |
 +|  %%bridge <​instance>​ priority <​priority>​%% ​ |  %%removed%% ​ |
 +|  %%bridge cist priority <​priority>​%% ​ |  %%spantree cist priority <​priority>​%% ​ |
 +|  %%bridge msti <​msti_id>​ priority <​priority>​%% ​ |  %%spantree msti <​msti_id>​ priority <​priority>​%% ​ |
 +|  %%bridge 1x1 <vid> priority <​priority>​%% ​ |  %%spantree ​ vlan <vid> priority <​priority>​%% ​ |
 +|  %%bridge hello time <​seconds>​%% ​ |  %%spantree hello-time <​seconds>​%% ​ |
 +|  %%bridge <​instance>​ hello time <​seconds>​%% ​ |  %%removed%% ​ |
 +|  %%bridge cist hello time <​seconds>​%% ​ |  %%spantree cist hello-time <​seconds>​%% ​ |
 +|  %%bridge 1x1 vid hello time <​seconds>​%% ​ |  %%spantree ​ vlan <vid> hello-time <​seconds>​%% ​ |
 +|  %%bridge max age <​seconds>​%% ​ |  %%spantree max-age <​seconds>​%% ​ |
 +|  %%bridge <​instance>​ max age <​seconds>​%% ​ |  %%removed%% ​ |
 +|  %%bridge cist max age <​seconds>​%% ​ |  %%spantree cist max-age <​seconds>​%% ​ |
 +|  %%bridge 1x1<​vid>​ max age <​seconds>​%% ​ |  %%spantree ​ vlan <vid> max-age <​seconds>​%% ​ |
 +|  %%bridge forward delay <​seconds>​%% ​ |  %%spantree forward-delay <​seconds>​%% ​ |
 +|  %%bridge <​instance>​ forward delay <​seconds>​%% ​ |  %%removed%% ​ |
 +|  %%bridge cist forward delay <​seconds>​%% ​ |  %%spantree cist forward-delay <​seconds>​%% ​ |
 +|  %%bridge 1x1 <vid> forward delay <​seconds>​%% ​ |  %%spantree ​ vlan <vid> forward-delay <​seconds>​%% ​ |
 +|  %%bridge ​ bpdu-switching {enable | disable}%% ​ |  %%spantree ​ bpdu-switching {enable | disable}%% ​ |
 +|  %%bridge <​instance>​ bpdu-switching {enable | disable}%% ​ |  %%removed%% ​ |
 +|  %%bridge cist bpdu-switching {enable | disable}%% ​ |  %%spantree cist bpdu-switching {enable | disable}%% ​ |
 +|  %%bridge 1x1 <vid> bpdu-switching {enable | disable}%% ​ |  %%spantree vlan <vid> bpdu-switching {enable | disable}%% ​ |
 +|  %%bridge path cost mode {auto | 32bit}%% ​ |  %%spantree path-cost-mode {auto | 32bit}%% ​ |
 +|  %%bridge [msti <​msti_id>​] auto-vlan-containment {enable | disable}%% ​ |  %%spantree [msti <​msti_id>​] auto-vlan-containment {enable | disable}%% ​ |
 +|  %%bridge instance {slot/port | logical_port} {enable | disable}%% ​ |  %%removed%% ​ |
 +|  %%bridge cist {slot/port | logical_port} {enable | disable}%% ​ |  %%spantree cist {port <​slot/​port1[-port2]>​ | linkagg <​linkagg1[-linkagg2]>​} {enable | disable}%% ​ |
 +|  %%bridge 1x1<​vid>​ {slot/port | logical_port} {enable | disable}%% ​ |  %%spantree ​ vlan <vid> {port <​slot/​port1[-port2]>​ | linkagg <​linkagg1[-linkagg2]>​} {enable | disable}%% ​ |
 +|  %%bridge instance {slot/port | logical_port} priority priority%% ​ |  %%removed%% ​ |
 +|  %%bridge cist {slot/port | logical_port} priority priority%% ​ |  %%spantree cist {port <​slot/​port1[-port2]>​ | linkagg <​linkagg1[-linkagg2]>​} priority priority%% ​ |
 +|  %%bridge msti <​msti_id>​ {slot/port | logical_port} priority priority%% ​ |  %%spantree msti <​msti_id>​ {port <​slot/​port>​ | linkagg <​linkagg1[-linkagg2]>​} priority priority%% ​ |
 +|  %%bridge 1x1<​vid>​ {slot/port | logical_port} priority priority%% ​ |  %%spantree ​ vlan <vid> {port <​slot/​port1[-port2]>​ | linkagg <​linkagg1[-linkagg2]>​} priority priority%% ​ |
 +|  %%bridge instance {slot/port | logical_port} path cost path_cost%% ​ |  %%removed%% ​ |
 +|  %%bridge cist {slot/port | logical_port} path cost path_cost%% ​ |  %%spantree cist {port <​slot/​port1[-port2]>​ | linkagg <​linkagg1[-linkagg2]>​} path-cost path_cost%% ​ |
 +|  %%bridge msti <​msti_id>​ {slot/port | logical_port} path cost path_cost%% ​ |  %%spantree msti <​msti_id>​ {port <​slot/​port>​ | linkagg <​linkagg1[-linkagg2]>​} path-cost path_cost%% ​ |
 +|  %%bridge 1x1 <vid> {slot/port | logical_port} path cost path_cost%% ​ |  %%spantree ​ vlan <vid> {port <​slot/​port1[-port2]>​ | linkagg <​linkagg1[-linkagg2]>​} path-cost path_cost%% ​ |
 +|  %%bridge instance {slot/port | logical_port} mode {forwarding | blocking | dynamic}%% ​ |  %%removed%% ​ |
 +|  %%bridge cist {slot/port | logical_port} mode {dynamic | blocking | forwarding}%% ​ |  %%spantree cist {port <​slot/​port1[-port2]>​ | linkagg <​linkagg1[-linkagg2]>​} mode {dynamic | blocking | forwarding}%% ​ |
 +|  %%bridge 1x1 <vid> {slot/port | logical_port} mode {dynamic | blocking | forwarding}%% ​ |  %%spantree ​ vlan <vid> {port <​slot/​port1[-port2]>​ | linkagg <​linkagg1[-linkagg2]>​} mode {dynamic | blocking | forwarding}%% ​ |
 +|  %%bridge instance {slot/port | logical_port} connection {noptp | ptp | autoptp | edgeport}%% ​ |  %%removed%% ​ |
 +|  %%bridge cist {slot/port | logical_port} connection {noptp | ptp | autoptp | edgeport}%% ​ |  %%spantree cist {port <​slot/​port1[-port2]>​ | linkagg <​linkagg1[-linkagg2]>​} connection {noptp | ptp | autoptp}%% ​ |
 +|  %%bridge 1x1 <vid> {slot/port | logical_port} connection {noptp | ptp | autoptp | edgeport}%% ​ |  %%spantree ​ vlan <vid> {port <​slot/​port1[-port2]>​ | linkagg <​linkagg1[-linkagg2]>​} connection {noptp | ptp | autoptp}%% ​ |
 +|  %%bridge cist {slot/port | logical_port} admin-edge {on | off | enable | disable}%% ​ |  %%spantree cist {port <​slot/​port1[-port2]>​ | linkagg <​linkagg1[-linkagg2]>​} admin-edge {enable | disable}%% ​ |
 +|  %%bridge 1x1 <vid> {slot/port | logical_port} admin-edge {on | off | enable | disable}%% ​ |  %%spantree ​ vlan <vid> {port <​slot/​port1[-port2]>​ | linkagg <​linkagg1[-linkagg2]>​} admin-edge {enable | disable}%% ​ |
 +|  %%bridge cist {slot/port | logical_port} auto-edge {on | off | enable | disable}%% ​ |  %%spantree cist {port <​slot/​port1[-port2]>​ | linkagg <​linkagg1[-linkagg2]>​} auto-edge {enable | disable}%% ​ |
 +|  %%bridge 1x1 <vid> {slot/port | logical_port} auto-edge {on | off | enable | disable}%% ​ |  %%spantree ​ vlan <vid> {port <​slot/​port1[-port2]>​ | linkagg <​linkagg1[-linkagg2]>​} auto-edge {enable | disable}%% ​ |
 +|  %%bridge cist {slot/port | logical_port} {restricted-role | root-guard} {on | off | enable | disable}%% ​ |  %%spantree cist {port <​slot/​port1[-port2]>​ | linkagg <​linkagg1[-linkagg2]>​} {restricted-role | root-guard} {enable | disable}%% ​ |
 +|  %%bridge 1x1<​vid>​ {slot/port | logical_port} {restricted-role | root-guard} {on | off | enable | disable}%% ​ |  %%spantree ​ vlan <vid> {port <​slot/​port1[-port2]>​ | linkagg <​linkagg1[-linkagg2]>​} {restricted-role | root-guard} {enable | disable}%% ​ |
 +|  %%bridge cist {slot/port | logical_port} restricted-tcn {on | off | enable | disable}%% ​ |  %%spantree cist {port <​slot/​port1[-port2]>​ | linkagg <​linkagg1[-linkagg2]>​} restricted-tcn {enable | disable}%% ​ |
 +|  %%bridge 1x1<​vid>​ {slot/port | logical_port} restricted-tcn {on | off | enable | disable}%% ​ |  %%spantree ​ vlan <vid> {port <​slot/​port1[-port2]>​ | linkagg <​linkagg1[-linkagg2]>​} restricted-tcn {enable | disable}%% ​ |
 +|  %%bridge cist txholdcount value%% ​ |  %%spantree cist txholdcount value%% ​ |
 +|  %%bridge 1x1<​vid>​ txholdcount {value}%% ​ |  %%spantree ​ vlan <vid> txholdcount {value}%% ​ |
 +|  %%bridge port slot/port 10gig os8800optimized {enable | disable}%% ​ |  %%removed%% ​ |
 +|  %%bridge rrstp%% ​ |  %%removed%% ​ |
 +|  %%no bridge rrstp%% ​ |  %%removed%% ​ |
 +|  %%bridge rrstp ring ring_id port1 {slot/port | linkagg agg_num} port2 {slot/port | linkagg agg_num} vlan-tag vlan_id [status {enable | disable}]%% ​ |  %%removed%% ​ |
 +|  %%no bridge rrstp ring [ring_id]%% ​ |  %%removed%% ​ |
 +|  %%bridge rrstp ring ring_id vlan-tag vid%%  |  %%removed%% ​ |
 +|  %%bridge rrstp ring ring_id status {enable | disable}%% ​ |  %%removed%% ​ |
 +|  %%show spantree %%  |  %%unchanged%% ​ |
 +|  %%show spantree <​instance>​%% ​ |  %%removed%% ​ |
 +|  %%show spantree cist%% ​ |  %%unchanged%% ​ |
 +|  %%show spantree msti [msti_id]%% ​ |  %%unchanged%% ​ |
 +|  %%show spantree 1x1 [vid]%% ​ |  %%show spantree ​ [vlan <​vid>​]%% ​ |
 +|  %%show spantree ports [forwarding | blocking | active | configured]%% ​ |  %%unchanged%% ​ |
 +|  %%show spantree <​instance>​ ports [forwarding | blocking | active | configured]%% ​ |  %%removed%% ​ |
 +|  %%show spantree cist ports [forwarding | blocking | active | configured]%% ​ |  %%unchanged%% ​ |
 +|  %%show spantree msti [msti_id] ports [forwarding | blocking | active | configured]%% ​ |  %%unchanged%% ​ |
 +|  %%show spantree 1x1 [vid] ports [forwarding | blocking | active | configured]%% ​ |  %%show spantree ​ [vlan <​vid>​] ports [forwarding | blocking | active | configured]%% ​ |
 +|  %%show spantree mst region%% ​ |  %%unchanged%% ​ |
 +|  %%show spantree mst [msti_id] vlan-map%% ​ |  %%unchanged%% ​ |
 +|  %%show spantree cist vlan-map%% ​ |  %%unchanged%% ​ |
 +|  %%show spantree mst vid vlan-map%% ​ |  %%unchanged%% ​ |
 +|  %%show spantree mst port {slot/port | logical_port}%% ​ |  %%show spantree mst {port <​slot/​port>​ | linkagg <​linkagg1[-linkagg2]>​}%% ​ |
 +|  %%show bridge rrstp configuration%% ​ |  %%removed%% ​ |
 +|  %%show bridge rrstp ring [ring_id]%% ​ |  %%removed%% ​ |
 +|  %%show spantree map-msti%% ​ |  %%show spantree [vlan <​vlan_id>​] map-msti%% ​ |
 +|  %%bridge mode 1x1 pvst+ {enable | disable}%% ​ |  %%spantree pvst+compatibility {enable | disable}%% ​ |
 +|  %%bridge port {slot/port | agg_num} pvst+ {auto | enable | disable}%% ​ |  %%spantree pvst+compatibility {port <​slot/​port>​ | linkagg <​linkagg1[-linkagg2]>​} {enable | disable | auto}%% ​ |
 +===== VFC =====
 +^  6.4.2.R01 Command ​ ^  7.1.1.R01 Command ​ ^
 +|  %%new command%% ​ |  %%qos wred {wrp-id <1-4> | wrp-name <​name>​} [color {all | g | y | r} {min <%> | max <%> | pb <%> | gain <​1-15>​}] [admin-state {enable | disable}]%% ​ |
 +|  %%new command%% ​ |  %%no qos wred {wrp-id <2-4> | wrp-name <​name>​}%% ​ |
 +|  %%new command%% ​ |  %%show qos wred [wrp-id <1-4> | wrp-name <​name>​]%% ​ |
 +|  %%new command%% ​ |  %%show qos wred [wrp-id <1-4> | wrp-name <​name>​] detail [port <​slot/​port[-port]>​ | slot <​slot>​ | linkagg <​agg[-agg]>​]%% ​ |
 +|  %%new command%% ​ |  %%qos qset {qsp-id <1-4> | qsp-name <​name>​} [wrp-id <1-4> | wpr-name <​name>​] [wred-admin {enable | disable}] [stats {enable | disable}]%% ​ |
 +|  %%new command%% ​ |  %%show qos qset [qsp-id <1-4> | qsp-name <​name>​]%% ​ |
 +|  %%new command%% ​ |  %%show qos qset [qsp-id <1-4> | qsp-name <​name>​] detail [port <​slot/​port[-port]>​ | slot <​slot>​ | linkagg <​agg[-agg]>​]%% ​ |
 +|  %%new command%% ​ |  %%qos qsap {port <​slot/​port[-port]>​ | slot <​slot>​ | linkagg <​agg[-agg]>​} [admin-state {enable | disable}]%% ​ |
 +|  %%new command%% ​ |  %%show qos qsap [port <​slot/​port[-port]>​ | slot <​slot>​ | linkagg <​agg[-agg]>​]%% ​ |
 +|  %%new command%% ​ |  %%show qos qsap [port <​slot/​port[-port]>​ | slot <​slot>​ | linkagg <​agg[-agg]>​] detail%% ​ |
 +|  %%new command%% ​ |  %%qos qsi {port <​slot/​port[-port]>​ | slot <​slot>​ | linkagg <​agg[-agg]>​} [qsp-id <1-4> | qsp-name <​name>​] [stats {enable | disable}] [wred-admin {enable | disable}]%% ​ |
 +|  %%new command%% ​ |  %%no qos qsi [port <​slot/​port[-port]>​ | slot <​slot>​} | linkagg <​agg[-agg]>​]%% ​ |
 +|  %%new command%% ​ |  %%clear qos qsap [port <​slot/​port[-port]>​ | slot <​slot>​ | linkagg <​agg[-agg]>​] stats [qp-id <​1-8>​]%% ​ |
 +|  %%new command%% ​ |  %%show qos qsap [port <​slot/​port[-port]>​ | slot <​slot>​ | linkagg <​agg[-agg]>​] stats [qp-id <​1-8>​]%% ​ |
 +===== VLAN MANAGER =====
 +^  6.4.2.R01 Command ​ ^  7.1.1.R01 Command ​ ^
 +|  %%vlan <​vid1[-vid2]>​ 802.1q {<​slot/​port1[-port2]> ​ | <​aggregate_id>​} %%  |  %%vlan <​vid1[-vid2]>​ members {port <​slot/​port1[-port2]>​ | linkagg <​agg1[-agg2]>​} tagged%% ​ |
 +|  %%no vlan <​vid1[-vid2]>​ 802.1q {<​slot/​port[-port2]>​ | <​aggregate_id>​} %%  |  %%no vlan <​vid1[-vid2]>​ members {port <​slot/​port1[-port2]>​ | linkagg <​agg1[-agg2]>​}%% ​ |
 +|  %%vlan <vid> port default {<​slot/​port>​ | <​link_agg>​} %%  |  %%vlan <vid> members {port <​slot/​port1[-port2]>​ | linkagg <​agg1[-agg2]>​} untagged%% ​ |
 +|  %%no vlan <​vid1[-vid2]>​ port default {<​slot/​port>​ | <​link_agg>​} %%  |  %%no vlan <​vid1[-vid2]>​ members {port <​slot/​port1[-port2]>​ | linkagg <​agg1[-agg2]>​}%% ​ |
 +|  %%vlan <​vid1[-vid2]>​ [enable | disable]%% ​ |  %%vlan <​vid1[-vid2]>​ [admin-state {enable | disable}]%% ​ |
 +|  %%no vlan vid mac mac_address %%  |  %%removed%% ​ |
 +|  %%no vlan vid mac range low_mac_address %%  |  %%removed%% ​ |
 +|  %%no vlan vid ip ip_address [subnet_mask] %%  |  %%removed%% ​ |
 +|  %%no vlan vid ipx ipx_net %%  |  %%removed%% ​ |
 +|  %%no vlan vid protocol {ip-e2 | ip-snap | ipx-e2 | ipx-nov | ipx-llc | ipx-snap | decnet | appletalk | ethertype type | dsapssap dsap/ssap | snap snaptype} %%  |  %%removed%% ​ |
 +|  %%no vlan vid port slot/port %%  |  %%removed%% ​ |
 +|  %%no vlan port mobile slot/port %%  |  %%removed%% ​ |
 +|  %%no vlan vid  router ipx %%  |  %%removed%% ​ |
 +|  %%show vlan [<​vid1[-vid2]>​] [port [<​slot/​port>​ | <​link_agg>​]]%% ​ |  %%show vlan [<​vid1[-vid2]>​] [members [port <​slot/​port1[-port2]>​ | linkagg <​agg1[-agg2]>​]]%% ​ |
 +|  %%show vlan router mac-status %%  |  %%removed%% ​ |
 +|  %%vlan 802.1q slot/port frame type {all | tagged}%% ​ |  %%removed%% ​ |
 +|  %%show 802.1q {slot/port | aggregate_id}%% ​ |  %%removed%% ​ |
 +|  %%show vlan gvrp [vid1[-vid2]]%% ​ |  %%removed%% ​ |
 +|  %%show vlan ipmvlan [ipmvlan-id1[-ipmvlan-id2]]%% ​ |  %%removed%% ​ |
 +|  %%vlan vid1[-vid2] {1x1 | flat} stp {enable | disable}%% ​ |  %%removed%% ​ |
 +|  %%vlan <​vid1[-vid2]>​ stp {enable | disable}%% ​ |  %%spantree vlan <​vid1[-vid2]>​ admin-state {enable | disable}%% ​ |
 +|  %%vlan vid1[-vid2] mobile-tag {enable | disable}%% ​ |  %%removed%% ​ |
 +|  %%vlan vid router ipx ipx_net [rip | active | inactive | triggered] [e2 | llc | snap | novell] [timeticks ticks]%% ​ |  %%removed%% ​ |
 +===== VLAN STACKING =====
 +^  6.4.2.R01 Command ​ ^  7.1.1.R01 Command ​ ^
 +|  %%ethernet-service {svlan | ipmvlan | management-vlan} svid1[-svid2] [enable | disable] [[1x1 | flat] stp {enable | disable}] [name description]%% ​ |  %%ethernet-service svlan <​svlan1[-svlan2]>​ [admin-state {enable | disable}] [name <​description>​] [mtu-ip <​size>​]%% ​ |
 +|  %%no ethernet-service {svlan | ipmvlan | management-vlan} svid1[-svid2]%% ​ |  %%no ethernet-service svlan <​svlan1[-svlan2]>​%% ​ |
 +|  %%ethernet-service service-name service-name {svlan | ipmvlan} svid%% ​ |  %%ethernet-service service-name <​service-name>​ svlan <​svlan>​%% ​ |
 +|  %%no ethernet-service service-name service-name {svlan | ipmvlan} svid%% ​ |  %%no ethernet-service service-name <​service-name>​ svlan <​svlan>​%% ​ |
 +|  %%ethernet-service svlan svid1[-svid2] nni {slot/​port1[-port2] | linkagg agg_num} [stp | erp]%% ​ |  %%ethernet-service svlan <​svlan1[-svlan2]>​ nni {port <​slot/​port1[-port2]>​ | linkagg <​linkagg1[-linkagg2]>​}%% ​ |
 +|  %%no ethernet-service svlan svid1[-svid2] nni {slot/​port1[-port2] | linkagg agg_num}%% ​ |  %%no ethernet-service svlan <​svlan1[-svlan2]>​ nni {port <​slot/​port1[-port2]>​ | linkagg <​linkagg1[-linkagg2]>​}%% ​ |
 +|  %%ethernet-service nni {slot/​port1[-port2] | agg_num} [tpid value] [{stp | gvrp} legacy-bpdu {enable | disable}] [transparent-bridging {enable | disable}]%% ​ |  %%ethernet-service nni {port <​slot/​port1[-port2]>​ | linkagg <​linkagg1[-linkagg2]>​} [tpid <​value>​] [{stp | mvrp} legacy-bpdu {enable | disable}]%% ​ |
 +|  %%new command%% ​ |  %%no ethernet-service nni {port <​slot/​port1[-port2]>​ | linkagg <​linkagg1[-linkagg2]>​}%% ​ |
 +|  %%ethernet-service sap sapid service-name service-name%% ​ |  %%no change%% ​ |
 +|  %%no ethernet-service sap sapid%% ​ |  %%no change%% ​ |
 +|  %%ethernet-service sap sapid uni {slot/​port1[-port2] | linkagg agg_num}%% ​ |  %%ethernet-service sap <​sapid>​ uni {port <​slot/​port1[-port2]>​ | linkagg <​linkagg1[-linkagg2]>​}%% ​ |
 +|  %%ethernet-service sap sapid no uni {slot/​port1[-port2] | linkagg agg_num}%% ​ |  %%no ethernet-service sap <​sapid>​ uni {port <​slot/​port1[-port2]>​ | linkagg <​linkagg1-[linkagg2]>​}%% ​ |
 +|  %%ethernet-service sap sapid cvlan {all | cvid | cvid1-cvid2 | untagged}%% ​ |  %%no change%% ​ |
 +|  %%ethernet-service sap sapid no cvlan {all | cvid | cvid1-cvid2 | untagged}%% ​ |  %%no ethernet-service sap <​sapid>​ cvlan {all | <​cvlan1[-cvlan2]>​ | untagged}%% ​ |
 +|  %%ethernet-service sap-profile sap-profile-name%% ​ |  %%no change%% ​ |
 +|  %%no ethernet-service sap-profile sap-profile-name%% ​ |  %%no change%% ​ |
 +|  %%ethernet-service sap sapid sap-profile sap-profile-name%% ​ |  %%no change%% ​ |
 +|  %%ethernet-service {svlan | ipmvlan} svid1[-svid2] source-learning {enable| disable}%% ​ |  %%removed: use '​mac-learning vlan <​vid[-vid]>​ {enable | disable}'​%% ​ |
 +|  %%ethernet-service uni-profile uni-profile-name [l2-protocol {stp | 802.1x | 802.1ab | 802.3ad | gvrp | amap} {peer | discard | tunnel}%% ​ |  %%ethernet-service uni-profile uni-profile-name [l2-protocol {stp | 802.1x | 802.1ab | 802.3ad | amap | mvrp} {peer | discard | tunnel}%% ​ |
 +|  %%no ethernet-service uni-profile uni-profile-name%% ​ |  %%no change%% ​ |
 +|  %%ethernet-service uni {slot/​port1[-port2] | agg_num} uni-profile uni-profile-name%% ​ |  %%ethernet-service uni {port <​slot/​port1[-port2]>​ | linkagg <​linkagg1[-linkagg2]>​} uni-profile <​uni-profile-name>​%% ​ |
 +|  %%show ethernet-service mode%% ​ |  %%removed%% ​ |
 +|  %%show ethernet-services vlan [svid1-[svid2]]%% ​ |  %%no change%% ​ |
 +|  %%show ethernet-service [service-name service-name | svlan svid]%% ​ |  %%no change%% ​ |
 +|  %%show ethernet-services sap [sapid]%% ​ |  %%no change%% ​ |
 +|  %%show ethernet-services port {slot/port | linkagg agg_num}%% ​ |  %%show ethernet-services {port <​slot/​port>​ | linkagg <​linkagg>​}%% ​ |
 +|  %%show ethernet-services nni [slot/port | linkagg agg_num]%% ​ |  %%show ethernet-services nni [port <​slot/​port>​ | linkagg <​linkagg>​]%% ​ |
 +|  %%show ethernet-services uni [slot/port | linkagg agg_num]%% ​ |  %%show ethernet-services uni [port <​slot/​port>​ | linkagg <​linkagg>​]%% ​ |
 +|  %%show ethernet-service uni-profile [uni-profile-name]%% ​ |  %%no change%% ​ |
 +|  %%show ethernet-service sap-profile sap-profile-name%% ​ |  %%no change%% ​ |
 +===== VRRP =====
 +^  6.4.2.R01 Command ​ ^  7.1.1.R01 Command ​ ^
 +|  %%Optional VRF Prefix on all cmds [vrf {vrf_name}]%% ​ |  %%Optional VRF Prefix on all cmds [vrf {vrf_name}]%% ​ |
 +|  %%vrrp vrid vlan_id [enable | disable | on | off] [priority priority] [preempt | no preempt] [[advertising] interval seconds]%% ​ |  %%no change%% ​ |
 +|  %%no vrrp vrid vlan_id%% ​ |  %%no change%% ​ |
 +|  %%vrrp vrid vlan_id address ip_address%% ​ |  %%no change%% ​ |
 +|  %%vrrp vrid vlan_id no address ip_address%% ​ |  %%no change%% ​ |
 +|  %%vrrp track track_id [enable | disable] [priority value] [ipv4-interface name | ipv6-interface name | port slot/port | address address]%% ​ |  %%no change%% ​ |
 +|  %%no vrrp track track_id%% ​ |  %%no change%% ​ |
 +|  %%vrrp vrid vlan_id track-association track_id%% ​ |  %%no change%% ​ |
 +|  %%vrrp vrid vlan_id no track-association track_id%% ​ |  %%no change%% ​ |
 +|  %%vrrp trap%% ​ |  %%no change%% ​ |
 +|  %%vrrp trap <id> address <​ip_address>​ bfd-std {enable | disable}%% ​ |  %%vrrp trap <id> address <​ip_address>​ bfd-state {enable | disable}%% ​ |
 +|  %%no vrrp trap%% ​ |  %%no change%% ​ |
 +|  %%vrrp delay seconds%% ​ |  %%no change%% ​ |
 +|  %%vrrp3 vrid vlan_id [enable | disable | on | off] [priority priority] [preempt | no preempt][accept | no accept] [[advertising] interval centiseconds]%% ​ |  %%no change%% ​ |
 +|  %%no vrrp3 vrid vlan_id%% ​ |  %%no change%% ​ |
 +|  %%vrrp3 vrid vlan_id address ipv6_address%% ​ |  %%no change%% ​ |
 +|  %%vrrp3 vrid vlan_id no address ipv6_address%% ​ |  %%no change%% ​ |
 +|  %%vrrp3 trap%% ​ |  %%no change%% ​ |
 +|  %%no vrrp3 trap%% ​ |  %%no change%% ​ |
 +|  %%vrrp3 vrid vlan_id track-association track_id%% ​ |  %%no change%% ​ |
 +|  %%vrrp3 vrid vlan_id no track-association track_id%% ​ |  %%no change%% ​ |
 +|  %%show vrrp [vrid]%% ​ |  %%no change%% ​ |
 +|  %%show vrrp [vrid] statistics%% ​ |  %%no change%% ​ |
 +|  %%show vrrp track [track_id]%% ​ |  %%no change%% ​ |
 +|  %%show vrrp [vrid] track-association [track_id]%% ​ |  %%no change%% ​ |
 +|  %%show vrrp3 [vrid]%% ​ |  %%no change%% ​ |
 +|  %%show vrrp3 [vrid] statistics%% ​ |  %%no change%% ​ |
 +|  %%show vrrp3 [vrid] track-association [track_id]%% ​ |  %%no change%% ​ |
  
aos_release_6_aos_release_7_cli_delta.txt · Zuletzt geändert: 2014/06/18 22:29 von benny