Benutzer-Werkzeuge

Webseiten-Werkzeuge


stellar-wireless-wpa3-sae-raspberry-pi

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

Link zu dieser Vergleichsansicht

Beide Seiten der vorigen Revision Vorhergehende Überarbeitung
stellar-wireless-wpa3-sae-raspberry-pi [2019/05/20 22:40]
benny [Compiling / Patching hostap/wpa_supplicant]
stellar-wireless-wpa3-sae-raspberry-pi [2019/06/06 22:45] (aktuell)
benny
Zeile 3: Zeile 3:
 Connecting with WPA3-Personal (SAE/PMF) on the Raspberry Pi 3 B+ via on-board wireless NIC is not exactly straight forward, but it works. On this page I'll document what needs to be done, to get it to work. Connecting with WPA3-Personal (SAE/PMF) on the Raspberry Pi 3 B+ via on-board wireless NIC is not exactly straight forward, but it works. On this page I'll document what needs to be done, to get it to work.
  
-**Equipement ​& Access Point used:**+**Equipment ​& Access Point used:**
   * [[https://​www.al-enterprise.com/​en/​products/​wlan/​omniaccess-stellar-access-point-1201|Alcatel-Lucent Enterprise OmniAccess Stellar AP1201]]   * [[https://​www.al-enterprise.com/​en/​products/​wlan/​omniaccess-stellar-access-point-1201|Alcatel-Lucent Enterprise OmniAccess Stellar AP1201]]
   * AWOS v3.0.6.20   * AWOS v3.0.6.20
Zeile 9: Zeile 9:
   * Raspberry Pi Model 3 B+   * Raspberry Pi Model 3 B+
 {{ :​omniaccess-stellar-ap1201.png?​direct&​400 |}} {{ :​omniaccess-stellar-ap1201.png?​direct&​400 |}}
 +
 +<WRAP center round tip 60%>
 +If you'd like to know how to connect a Windows 10 laptop via WPA3-Personal,​ [[stellar-wireless-win10-windows-10-wpa3-sae|you may want to review this article]]!
 +</​WRAP>​
  
 Connecting to SSID "​ov44b39"​ mandates MFP/PMF (as SAE-only), as you can tell from following **Wifi Explorer** screenshot. Connecting to SSID "​ov44b39"​ mandates MFP/PMF (as SAE-only), as you can tell from following **Wifi Explorer** screenshot.
stellar-wireless-wpa3-sae-raspberry-pi.txt · Zuletzt geändert: 2019/06/06 22:45 von benny