Nagios Core can be used to monitor network devices and servers. Through SNMP and Nagios extensions, detailed information about network status and device status can be obtained. In this article, the implementation of monitoring using Nagios Core will be described based on Alcatel-Lucent Enterprise equipment.

In this case, Nagios Core is installed on an CentOS 7 server with Nagios Core 4.0.7. The IP address 192.168.10.240 is used.

It is recommended to use SNMP to check the device status. SNMPv3 will provide the best security to avoid that information about the network are going to unauthorized users. A user account nagiosadmin is added on the switch to enable that SNMP information can be received by the nagios. On the switch, snmp security pricay-set is choosen. SNMPv3 is necessary to get information. The user is authenticated with the MD5 algorithm. No encryption is used for transmission of SNMP information.

user nagiosadmin password ******** read-only all md5
snmp security privacy-set

In the next step, Nagios Core can be configured.

A configuration file for each switch will be implemented. The defined services are

• Ping
• Uptime
• Port Status

For Nagios Core ping can be done with the check_ping command.