#
# Classify stellar Wireless AP as HANAP
#
class "HANAP" {
match if substring (option vendor-class-identifier, 0, 4) = "HAP.";
}
subnet 192.168.10.0 netmask 255.255.255.0 {
option routers 192.168.10.1;
option broadcast-address 192.168.10.255;
option domain-name-servers 192.168.10.1;
option domain-name "vlan10.home";
option ntp-servers 192.168.10.1;
default-lease-time 6000;
max-lease-time 72000;
# Pool for HANAP
pool {
allow members of "HANAP";
range 192.168.10.10 192.168.10.20;
# Option 66
option tftp-server-name "192.168.10.1";
# Option 67 (instruction file to download via tftp)
option bootfile-name "hap_instruction.ini";
}
pool {
range 192.168.10.21 192.168.10.50;
allow unknown-clients;
}
}
Instruction Datei muss via DHCP (Offer) Option 67 angeflogen kommen. Die Namen der Dateien können nicht geändert werden! In Option 66 muss der Server stehen (IP für TFTP).
imgdesc:"http://192.168.10.1/oaw/hap_imgdesc.ini" imgurlhead:"http://192.168.10.1/oaw/img/" conf:"http://192.168.10.1/oaw/hap_conf.ini"
(conf: kann auch HTTPS sein!)
config model 'AP1101'
option version '2.1.0.110'
option filename 'AOS-WNG-2.1.0.110.bin'
option md5 '6f92c397067484ff5075484c24c529c5'
config ap
option countrycode 'DE'
option password 'blubbla123' <- Needs to be unencrypted, this is for "Administrator" WebGUI password
config wifi-iface "Markt"
option ssid 'Markt'
option key 'vollsicher'
option encryption 'psk-mixed+tkip+aes'
option network_type 'employee'
option network 'wan'
config wifi-iface "Scanner"
option ssid 'Scanner'
option key 'vollsicher'
option encryption 'psk-mixed+tkip+aes'
option network_type 'employee'
option network 'wan'
config wifi-iface "FreeWIFI"
option ssid 'FreeWIFI'
option key 'vollsicher'
option encryption 'psk-mixed+tkip+aes'
option network_type 'employee'
option network 'wan'
(out of scope für den Moment)
Erstmal nur als Entwurf hier! -benny
OmniSwitch Modelle bzgl. die Vendor-Class-Identifier unterstützt von OXO:
# OXO <= R910 OmniSwitch-OS6450-P24 OmniSwitch-OS6450-P48 OmniSwitch-OS6450-P10 OmniSwitch-OS6450-P10L OmniSwitch-OS6250-P24 OmniSwitch-OS6450-P24L OmniSwitch-OS6450-P48L # OXO R 10.2 OmniSwitch-OS6350-P24 OmniSwitch-OS6350-P48 OmniSwitch-OS6860-P24 OmniSwitch-OS6860-P48 OmniSwitch-OS6860E-P24 OmniSwitch-OS6860E-P48 # OXO R 10.3 OmniSwitch-OS6350-P10 OmniSwitch-OS6350-10
Switches erwarten os_instruction_file, os_configuration und os_script via DHCP bzgl. TFTP/FTP/SFTP OmniSwitch mit Release 6 nehmen nur eine IP im RCL an wenn alle Informationen vorhanden sind!
# OmniSwitch Instruction File
! Alcatel-Lucent Enterprise OmniSwitch - Instruction file version 1.2.2 ! Firmware version Firmware version:None Firmware location:None ! Configuration file Config filename:os_conf Config location:/tftpboot ! Debug file Debug filename:None Debug location:None ! Script file Script filename:os_script Script location:/tftpboot ! Primary file server Primary server:192.168.92.246 Primary protocol:TFTP Primary user:os_user ! Secondary file server Secondary server:None Secondary protocol:None Secondary user:none
# OmniSwitch Script File
copy working certified
# OmniSwitch Konfiguration
system daylight savings time disable vlan 1 enable name "VLAN 1" ip service all ip interface dhcp-client vlan 1 ifindex 1 ip interface dhcp-client vsi-accept-filter "alcatel.a4400.0" aaa authentication default "local" aaa authentication console "local" bridge mode flat qos enable qos trust ports qos no phones swlog console level info lanpower start 1 webview wlan cluster-virtual-ip 192.168.92.134