====== Stellar Wireless IoT ======
<WRAP center round tip 60%>
Hier sammle ich rein Notizen bzgl. einem Entwicklungsstand unseres AWOS!
</WRAP>

===== Einrichtung des Servers =====

==== Installation von mosquitto ====
Folgendes gilt für Debian Bullseye
<code>
benny@tiger:~$ sudo apt install mosquitto mosquitto-clients
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
The following additional packages will be installed:
  libcjson1 libdlt2 libev4 libmosquitto1 libwebsockets16
The following NEW packages will be installed:
  libcjson1 libdlt2 libev4 libmosquitto1 libwebsockets16 mosquitto mosquitto-clients
0 upgraded, 7 newly installed, 0 to remove and 0 not upgraded.
Need to get 783 kB of archives.
After this operation, 2,001 kB of additional disk space will be used.
Do you want to continue? [Y/n] 
</code>
==== Einrichtung für Laborbetrieb ====

=== Zugriff ohne Authentifizierung erlauben ===

<code>
root@tiger:~# echo "allow_anonymous true" > /etc/mosquitto/conf.d/allow_anonymous.conf
root@tiger:~# systemctl restart mosquitto.service 
root@tiger:~# systemctl status mosquitto.service 
● mosquitto.service - Mosquitto MQTT Broker
     Loaded: loaded (/lib/systemd/system/mosquitto.service; enabled; vendor preset: enabled)
     Active: active (running) since Mon 2022-01-03 19:39:35 CET; 12s ago
       Docs: man:mosquitto.conf(5)
             man:mosquitto(8)
    Process: 1321695 ExecStartPre=/bin/mkdir -m 740 -p /var/log/mosquitto (code=exited, status=0/SUCCESS)
    Process: 1321696 ExecStartPre=/bin/chown mosquitto /var/log/mosquitto (code=exited, status=0/SUCCESS)
    Process: 1321697 ExecStartPre=/bin/mkdir -m 740 -p /run/mosquitto (code=exited, status=0/SUCCESS)
    Process: 1321698 ExecStartPre=/bin/chown mosquitto /run/mosquitto (code=exited, status=0/SUCCESS)
   Main PID: 1321699 (mosquitto)
      Tasks: 1 (limit: 2340)
     Memory: 1.0M
        CPU: 52ms
     CGroup: /system.slice/mosquitto.service
             └─1321699 /usr/sbin/mosquitto -c /etc/mosquitto/mosquitto.conf

Jan 03 19:39:35 tiger systemd[1]: Starting Mosquitto MQTT Broker...
Jan 03 19:39:35 tiger mosquitto[1321699]: 1641235175: Loading config file /etc/mosquitto/conf.d/allow_anonymous.conf
Jan 03 19:39:35 tiger systemd[1]: Started Mosquitto MQTT Broker.
</code>

=== "mosquitto" von außen erreichbar machen ===

<code>
root@tiger:~# echo "listener 1883" > /etc/mosquitto/conf.d/listener_1883.conf
root@tiger:~# systemctl restart mosquitto.service 
root@tiger:~# systemctl status mosquitto.service 
● mosquitto.service - Mosquitto MQTT Broker
     Loaded: loaded (/lib/systemd/system/mosquitto.service; enabled; vendor preset: enabled)
     Active: active (running) since Mon 2022-01-03 19:43:25 CET; 1s ago
       Docs: man:mosquitto.conf(5)
             man:mosquitto(8)
    Process: 1321980 ExecStartPre=/bin/mkdir -m 740 -p /var/log/mosquitto (code=exited, status=0/SUCCESS)
    Process: 1321981 ExecStartPre=/bin/chown mosquitto /var/log/mosquitto (code=exited, status=0/SUCCESS)
    Process: 1321982 ExecStartPre=/bin/mkdir -m 740 -p /run/mosquitto (code=exited, status=0/SUCCESS)
    Process: 1321983 ExecStartPre=/bin/chown mosquitto /run/mosquitto (code=exited, status=0/SUCCESS)
   Main PID: 1321984 (mosquitto)
      Tasks: 1 (limit: 2340)
     Memory: 1.0M
        CPU: 49ms
     CGroup: /system.slice/mosquitto.service
             └─1321984 /usr/sbin/mosquitto -c /etc/mosquitto/mosquitto.conf

Jan 03 19:43:24 tiger systemd[1]: Starting Mosquitto MQTT Broker...
Jan 03 19:43:24 tiger mosquitto[1321984]: 1641235404: Loading config file /etc/mosquitto/conf.d/allow_anonymous.conf
Jan 03 19:43:24 tiger mosquitto[1321984]: 1641235404: Loading config file /etc/mosquitto/conf.d/listener_1883.conf
Jan 03 19:43:25 tiger systemd[1]: Started Mosquitto MQTT Broker.
                      
root@tiger:~# ss -lsbnut | grep 1883
tcp   LISTEN 0      100          0.0.0.0:1883       0.0.0.0:*          
tcp   LISTEN 0      100             [::]:1883          [::]:*          
</code>

==== MQTT-Nachrichten anzeigen ====

<code>
benny@tiger:~$ mosquitto_sub --pretty --insecure -t stellar
...
stellar {
	"data":[
		{
			"timestamp":"2022-01-03T21:15:41+0100",
			"connectable":1,
			"deviceMac":"7d4811xxxxxx",
			"rssi":-61,
			"rawData":"008734940b44aa0779ee42ba4b4a10054d"
		},
... (omitted)
		{
			"timestamp":"2022-01-03T21:15:41+0100",
			"connectable":1,
			"deviceMac":"5c551axxxxxx",
			"rssi":-62,
			"rawData":"001006631e020db93b0000000000000000"
		}
	],
	"dateType":"gap",
	"bleMac":"dc0856131e7f",
	"wlanMac":"dc0856131e60",
	"timestamp":1641240941
}
....
</code>

===== Einrichtung des Stellar APs =====
<WRAP center round tip 60%>
Die hier gezeigten Befehle sind nur in einem internen Entwicklungsbuild verfügbar.
</WRAP>

==== IoT Server Konfiguration auf dem Stellar AP ====

<code>
support@AP-1E:60:/$ cat /tmp/iot-server.conf 
{
	"GenericIoTServer": {
		"ServiceSwitch": "enable",
		"RadioMode": "ble",
		"Host": "192.168.2.134",
		"Port": 1883,
		"Topic": "stellar",
		"ReportingInterval": 5
	}
}

support@AP-1E:60:/$ cat /tmp/ble-config.conf 
{
    "GenericBLE":{
        "ServiceSwitch":"enable"
    }
}
</code>

==== IoT Server starten ====
(Dies speichert auch die Konfiguration bootfest.)
<code>
support@AP-1E:60:/$ ssudo iot-cfg iot-server -f /tmp/iot-server.conf
support@AP-1E:60:/$ /usr/bin/iot-server start ..

support@AP-1E:60:/$ ssudo iot-cfg iot-server show
{
	"GenericIoTServer": {
		"ServiceSwitch": "enable",
		"RadioMode": "",
		"Host": "192.168.2.134",
		"Port": 1883,
		"Topic": "stellar",
		"ReportingInterval": 5
	}
}
</code>

<code>
support@AP-1E:60:/$ ssudo iot-cfg ble-manage -f /tmp/ble-config.conf 
support@AP-1E:60:/$ {
	"success": true,
	"error": {
		"errorCode": 0,
		"errorMessage": ""
	}
}
/usr/bin/btd start ..
/usr/bin/bt-manager start ..
</code>

<code>
support@AP-1E:60:/$ ssudo iot-cfg ble-manage show
{
	"GenericBLE": {
		"ServiceSwitch": "enable",
		"ConnectDevList": [
			
		]
	}
}
</code>