====== AOS Release 6 zu AOS Release 7 CLI Delta ======
Mit Einführung von AOS Release 7 wurde die CLI verbessert. Dabei wurde insbesondere auf die Rückmeldungen von Partnern/Kunden eingangen.

  * Verwendung von Port-Ranges
  * Einheitliche Verwendung von "admin-state"
  * "no" ist, wo es sinnvoll ist, zu Beginn der Zeile
  * Ab AOS 7.3.1.R01 ist es möglich Kommandos abzukürzen "sh ip int" anstatt "show ip interfaces"
  * Bei Spanning-Tree wird einheitlich "spantree" für alle Kommandos verwendet

===== CHASSIS SUPERVISION =====
^  6.4.2.R01 Command  ^  7.1.1.R01 Command  ^
|  %%reload [primary | secondary | all] [with-fabric] [in [hours:] minutes | at hour:minute [month day | day month] | cancel]%%  |  %%reload [primary | secondary | all] [in [hours:] minutes | at hour:minute [month day | day month] | cancel]%%  |
|  %%reload working {rollback-timeout minutes | no rollback-timeout} [in [hours:] minutes | at hour:minute]%%  |  %%reload from <image-dir> {rollback-timeout minutes | no rollback-timeout} [redundancy-time <redundancy-time>] [in [hours:] minutes | at hour:minute]%%  |
|  %%new command%%  |  %%issu from <image-dir> redundancy-time <redundancy-time>%%  |
|  %%[configure] copy running-config working%%  |  %%removed%%  |
|  %%[configure] write memory%%  |  %%write memory%%  |
|  %%[configure] write memory flash-synchro%%  |  %%write memory flash-synchro%%  |
|  %%[configure] copy working certified [flash-synchro]%%  |  %%copy running certified [flash-synchro] %%  |
|  %%[configure] copy certified working%%  |  %%copy certified <image-directory> [make-running-directory]%%  |
|  %%[configure] copy flash-synchro%%  |  %%no change%%  |
|  %%new command%%  |  %%modify running-directory <image-directory>%%  |
|  %%takeover [with-fabric]%%  |  %%takeover%%  |
|  %%show running-directory%%  |  %%no change%%  |
|  %%show reload [status | all status]%%  |  %%no change%%  |
|  %%show microcode [issu | working | certified | loaded]%%  |  %%show microcode [issu | working | certified | loaded | <directory>]%%  |
|  %%show microcode history [working | certified]%%  |  %%removed%%  |
|  %%system contact text_string%%  |  %%no change%%  |
|  %%system name text_string%%  |  %%no change%%  |
|  %%system location text_string%%  |  %%no change%%  |
|  %%system date [mm/dd/yyyy]%%  |  %%no change%%  |
|  %%system time [hh:mm:ss]%%  |  %%no change%%  |
|  %%system time-and-date synchro%%  |  %%removed%%  |
|  %%system timezone [timezone_abbrev | offset_value | time_notation]%%  |  %%system timezone [timezone_abbrev | time_notation]%%  |
|  %%system daylight savings time [{enable | disable} | start {week} {day} in {month} at {hh:mm} end {week} {day} in {month} at {hh:mm} [by min]]%%  |  %%system daylight-savings-time%%  |
|  %%reload ni [slot] number%%  |  %%reload slot <number>%%  |
|  %%reload pass-through slot-number%%  |  %%removed%%  |
|  %%power ni [slot] slot-number%%  |  %%power slot <slot[-slot]>%%  |
|  %%no power ni [slot] slot-number%%  |  %%no power slot <slot[-slot]>%%  |
|  %%temp-threshold temp slot slot-number%%  |  %%no change%%  |
|  %%new command%%  |  %%[no] powersupply enable [<psu-id>]%%  |
|  %%rcp rem-slot:[path/]src_filename [path/]dst_filename%%  |  %%no change%%  |
|  %%rdf%%  |  %%rdf [slot-nr]%%  |
|  %%rls <string> [<string>]%%  |  %%rls rem-slot <path> [<filename>]%%  |
|  %%rrm <string> <string>%%  |  %%rrm rem-slot <[path/]filename>%%  |
|  %%stack set slot slot-number saved-slot saved-slot-number [reload]%%  |  %%no change%%  |
|  %%stack clear slot slot-number%%  |  %%no change%%  |
|  %%show system%%  |  %%no change%%  |
|  %%show hardware info%%  |  %%show hardware-info%%  |
|  %%show chassis [number]%%  |  %%no change%%  |
|  %%show cmm [number]%%  |  %%show cmm [<number> | <cmm_letter>]%%  |
|  %%show ni [number]%%  |  %%show slot [<slot-nr>] %%  |
|  %%new command%%  |  %%show transceivers [slot <slot-nr> [transceiver <transceiver_num>]] %%  |
|  %%show module [number]%%  |  %%show module[<number> | <cmm_letter>]%%  |
|  %%show module long [number]%%  |  %%show module long [<number> | <cmm_letter>]%%  |
|  %%show module status [number]%%  |  %%show module status [<number> | <cmm_letter>]%%  |
|  %%show power [supply] [number]%%  |  %%show powersupply [<number>]%%  |
|  %%show fan [number]%%  |  %%no change%%  |
|  %%new command%%  |  %%show fantray [<fantray-nr>] %%  |
|  %%show temperature [number]%%  |  %%show temperature [fabric [<index>] | slot [<index>] | fantray [<index>] | cmm [<index> | <cmm_letter>]]%%  |
|  %%show stack topology [slot-number]%%  |  %%removed: not supported%%  |
|  %%show stack status%%  |  %%removed: not supported%%  |
|  %%hash-control brief%%  |  %%moved to CapMan%%  |
|  %%hash-control extended [[no] udp-tcp-port]%%  |  %%moved to CapMan%%  |
|  %%show hash-control%%  |  %%moved to CapMan%%  |
|  %%new command%%  |  %%show escalation-strategy [<slot-id>]%%  |
|  %%license apply%%  |  %%removed: not supported%%  |
|  %%show license info%%  |  %%removed: not supported%%  |
|  %%show license file%%  |  %%removed: not supported%%  |
|  %%debug chassis auto-reboot enable|disable%%  |  %%removed%%  |
|  %%debug chassis auto-reboot ni enable|disable%%  |  %%removed%%  |
|  %%debug chassis hello timers enable|disable%%  |  %%removed%%  |
|  %%debug chassis secondary emp {enable | disable}%%  |  %%removed%%  |
|  %%debug chassis hello {enable | disable}%%  |  %%removed%%  |
|  %%debug chassis show%%  |  %%removed%%  |
|  %%debug chassis show state trace%%  |  %%removed%%  |
|  %%debug chassis show application context all%%  |  %%removed%%  |
|  %%new command%%  |  %%debug show boardinfo%%  |
|  %%update fpga { [cmm [<slot>]]  |  [ni { <slot> | all }] [daughter <num>] {file <file-name>} }%%  |  %%no change%%  |
===== DHCP RELAY =====
^  6.4.2.R01 Command  ^  7.1.1.R01 Command  ^
|  %%642Commands%%  |  %%711Commands%%  |
|  %%ip helper address ip_address%%  |  %%no change%%  |
|  %%ip helper no address [ip_address]%%  |  %%no ip helper address <ip_address>*%%  |
|  %%ip helper address ip_address vlan vlan_id%%  |  %%ip helper vlan <vlan1[-vlan2]> address <ip_address>* %%  |
|  %%ip helper no address ip_address vlan vlan_id%%  |  %%no ip helper vlan <vlan1[-vlan2]> address <ip_address>* %%  |
|  %%ip helper standard%%  |  %%no change%%  |
|  %%ip helper avlan only%%  |  %%removed%%  |
|  %%ip helper per-vlan only%%  |  %%ip helper per-vlan-only%%  |
|  %%ip helper forward delay seconds%%  |  %%ip helper forward-delay <seconds>%%  |
|  %%ip helper maximum hops hops%%  |  %%ip helper maximum-hops <hops>%%  |
|  %%ip helper agent-information {enable | disable}%%  |  %%no change%%  |
|  %%ip helper agent-information policy {drop | keep | replace}%%  |  %%no change%%  |
|  %%ip helper pxe-support {enable | disable}%%  |  %%no change%%  |
|  %%ip helper traffic-suppression {enable | disable}%%  |  %%removed%%  |
|  %%ip helper dhcp-snooping {enable | disable}%%  |  %%removed%%  |
|  %%ip helper dhcp-snooping mac-address verification {enable | disable}%%  |  %%removed%%  |
|  %%ip helper dhcp-snooping option-82 data-insertion {enable | disable}%%  |  %%removed%%  |
|  %%ip helper dhcp-snooping option-82 data-insertion format {base-mac | system-name | userstring string | interface-alias | auto-interface-alias}%%  |  %%removed%%  |
|  %%ip helper dhcp-snooping bypass option-82-check {enable | disable}%%  |  %%removed%%  |
|  %%ip helper dhcp-snooping vlan vlan_id [mac-address verification {enable | disable}] [option-82 data-insertion {enable | disable}]%%  |  %%removed%%  |
|  %%no ip helper dhcp-snooping vlan vlan_id%%  |  %%removed%%  |
|  %%ip helper dhcp-snooping port slot1/port1[-port1a] {block | client-only | trust}%%  |  %%removed%%  |
|  %%ip helper dhcp-snooping linkagg num {block | client-only | trust}%%  |  %%removed%%  |
|  %%ip helper dhcp-snooping port slot1/port1[-port1a] traffic-suppression {enable | disable}%%  |  %%removed%%  |
|  %%ip helper dhcp-snooping port slot1/port1[-port1a] ip-source-filtering {enable | disable}%%  |  %%removed%%  |
|  %%ip helper dhcp-snooping port binding {[enable | disable] | [mac_address port slot/port address ip_address vlan vlan_id]}%%  |  %%removed%%  |
|  %%no ip helper dhcp-snooping port binding mac_address port slot/port address ip_address vlan vlan_id%%  |  %%removed%%  |
|  %%ip helper dhcp-snooping port binding timeout seconds%%  |  %%removed%%  |
|  %%ip helper dhcp-snooping port binding action {purge | renew}%%  |  %%removed%%  |
|  %%ip helper dhcp-snooping binding persistency {enable | disable}%%  |  %%removed%%  |
|  %%ip helper boot-up {enable | disable}%%  |  %%no change%%  |
|  %%ip helper boot-up enable {BOOTP | DHCP}%%  |  %%no change%%  |
|  %%ip udp relay {BOOTP | NBDD | NBNSNBDD | DNS | TACACS | TFTP | NTP | port [name]}%%  |  %%ip udp relay service {TFTP | TACACS | NTP | NBNS | NBDD | DNS} [description <desc>]%%  |
|  %%%%  |  %%ip udp relay port <port> [description <desc>]%%  |
|  %%no ip udp relay {BOOTP | NBDD | NBNSNBDD | DNS | TACACS | TFTP | NTP | port}%%  |  %%ip udp relay no service {TFTP | TACACS | NTP | NBNS | NBDD | DNS}%%  |
|  %%%%  |  %%ip udp relay no port <port>%%  |
|  %%ip udp relay {BOOTP | NBDD | NBNSNBDD | DNS | TACACS | TFTP | NTP | port} vlan vlan_id%%  |  %%ip udp relay service {TFTP | TACACS | NTP | NBNS | NBDD | DNS} [description <desc>] vlan <vlan1[-vlan2]>%%  |
|  %%%%  |  %%ip udp relay port <port> [description <desc>] vlan <vlan1[-vlan2]>%%  |
|  %%no ip udp relay {BOOTP | NBDD | NBNSNBDD | DNS | TACACS | TFTP | NTP | port} vlan vlan_id%%  |  %%ip udp relay service {TFTP | TACACS | NTP | NBNS | NBDD | DNS} no vlan <vlan1[-vlan2]>%%  |
|  %%%%  |  %%ip udp relay port <port> no vlan <vlan1[-vlan2]>%%  |
|  %%new command%%  |  %%ip udp relay no statistics%%  |
|  %%show ip helper%%  |  %%no change%%  |
|  %%show ip helper stats%%  |  %%show ip helper statistics%%  |
|  %%ip helper no stats%%  |  %%no ip helper statistics%%  |
|  %%show ip helper dhcp-snooping vlan%%  |  %%removed%%  |
|  %%show ip helper dhcp-snooping port%%  |  %%removed%%  |
|  %%show ip helper dhcp-snooping binding%%  |  %%removed%%  |
|  %%show ip udp relay service [BOOTP | NBDD | NBNSNBDD | DNS | TACACS | TFTP | NTP | port]%%  |  %%show ip udp relay service {TFTP | TACACS | NTP | NBNS | NBDD | DNS}%%  |
|  %%show ip udp relay [BOOTP | NBDD | NBNSNBDD | DNS | TACACS | TFTP | NTP | port]%%  |  %%show ip udp relay port <port>%%  |
|  %%show ip udp relay destination [BOOTP | NBDD | NBNSNBDD | DNS | TACACS | TFTP | NTP | port]%%  |  %%show ip udp relay%%  |
|  %%show ip udp relay statistics%%  |  %%show ip udp relay statistics service {TFTP | TACACS | NTP | NBNS | NBDD | DNS}%%  |
|  %%show ip udp relay statistics [BOOTP | NBDD | NBNSNBDD | DNS | TACACS | TFTP | NTP | port]%%  |  %%show ip udp relay statistics port <port>%%  |
|  %%%%  |  %%show ip udp relay statistics%%  |
===== DVMRP =====
^  6.4.2.R01 Command  ^  7.1.1.R01 Command  ^
|  %%642Commands%%  |  %%711Commands%%  |
|  %%%%  |  %%VRP Prefix has been added to all cmds [{vrf vrf_name}]%%  |
|  %%ip load dvmrp%%  |  %%remaining cmd no change%%  |
|  %%ip dvmrp status {enable | disable}%%  |  %%ip dvmrp admin-state {enable | disable}%%  |
|  %%ip dvmrp flash-interval seconds%%  |  %%remaining cmd no change%%  |
|  %%ip dvmrp graft-timeout seconds%%  |  %%remaining cmd no change%%  |
|  %%ip dvmrp interface {interface_name}%%  |  %%remaining cmd no change%%  |
|  %%no ip dvmrp interface {interface_name}%%  |  %%remaining cmd no change%%  |
|  %%ip dvmrp interface {interface_name} metric value%%  |  %%remaining cmd no change%%  |
|  %%ip dvmrp neighbor-interval seconds%%  |  %%remaining cmd no change%%  |
|  %%ip dvmrp neighbor-timeout seconds%%  |  %%remaining cmd no change%%  |
|  %%ip dvmrp prune-lifetime seconds%%  |  %%remaining cmd no change%%  |
|  %%ip dvmrp prune-timeout seconds%%  |  %%remaining cmd no change%%  |
|  %%ip dvmrp report-interval seconds%%  |  %%remaining cmd no change%%  |
|  %%ip dvmrp route-holddown seconds%%  |  %%remaining cmd no change%%  |
|  %%ip dvmrp route-timeout seconds%%  |  %%remaining cmd no change%%  |
|  %%ip dvmrp subord-default {true | false}%%  |  %%remaining cmd no change%%  |
|  %%ip dvmrp tunnel {local_name} {remote_address}%%  |  %%removed: functionality replaced by 'ip interface <name> tunnel [source <ip_address>] [destination <ip_address>] [protocol {ipip | gre}]'%%  |
|  %%no ip dvmrp tunnel {local_name} {remote_address}%%  |  %%removed: functionality replaced by 'no ip dvmrp interface <name>'%%  |
|  %%ip dvmrp tunnel {interface_name remote_address} ttl value%%  |  %%removed%%  |
|  %%show ip dvmrp%%  |  %%remaining cmd no change%%  |
|  %%show ip dvmrp interface [ip_address | interface_name | enabled | disabled]%%  |  %%remaining cmd no change%%  |
|  %%show ip dvmrp neighbor [ip_address]%%  |  %%remaining cmd no change%%  |
|  %%show ip dvmrp nexthop [ip_address ip_mask]%%  |  %%remaining cmd no change%%  |
|  %%show ip dvmrp prune [group_address source_address source_mask]%%  |  %%remaining cmd no change%%  |
|  %%show ip dvmrp route [ip_address ip_mask]%%  |  %%remaining cmd no change%%  |
|  %%show ip dvmrp tunnel [local_address remote_address]%%  |  %%remaining cmd no change%%  |
===== MULTI-CHASSIS =====
^  6.4.2.R01 Command  ^  7.1.1.R01 Command  ^
|  %%MULTI-CHASSIS CHASSIS-ID <chassisId> [IPC-VLAN <vlan>] [HELLO-INTERVAL <interval>]%%  |  %%no change%%  |
|  %%MULTI-CHASSIS {IPC-VLAN <vlan> | HELLO-INTERVAL <interval>}%%  |  %%no change%%  |
|  %%NO MULTI-CHASSIS CHASSIS-ID%%  |  %%no change%%  |
|  %%MULTI-CHASSIS VIP-VLAN {<vlan[-vlan2]>} [ENABLE | DISABLE]%%  |  %%MULTI-CHASSIS VIP-VLAN {<vlan[-vlan2]>} [ADMIN-STATE {ENABLE | DISABLE}] [NAME <name>] [MTU-IP <size>]%%  |
|  %%NO MULTI-CHASSIS VIP-VLAN {<vlan[-vlan2]>}%%  |  %%no change%%  |
|  %%MULTI-CHASSIS VF-LINK CREATE%%  |  %%no change%%  |
|  %%NO MULTI-CHASSIS VF-LINK%%  |  %%no change%%  |
|  %%MULTI-CHASSIS VF-LINK MEMBER-PORT <slot/port>%%  |  %%no change%%  |
|  %%NO MULTI-CHASSIS VF-LINK MEMBER-PORT <slot/port>%%  |  %%no change%%  |
|  %%MULTI-CHASSIS VF-LINK DEFAULT-VLAN <vlan>%%  |  %%no change%%  |
|  %%MULTI-CHASSIS LOOP-DETECTION {ENABLE | DISABLE}%%  |  %%no change%%  |
|  %%MULTI-CHASSIS LOOP-DETECTION TRANSMIT-INTERVAL <interval>%%  |  %%no change%%  |
|  %%SHOW MULTI-CHASSIS STATUS%%  |  %%no change%%  |
|  %%SHOW MULTI-CHASSIS LOOP-DETECTION%%  |  %%no change%%  |
|  %%SHOW MULTI-CHASSIS VF-LINK%%  |  %%no change%%  |
|  %%SHOW MULTI-CHASSIS VF-LINK MEMBER-PORT [<slot/port>]%%  |  %%no change%%  |
|  %%SHOW MULTI-CHASSIS CONSISTENCY%%  |  %%no change%%  |
|  %%SHOW MULTI-CHASSIS CONSISTENCY LINKAGG <aggId>%%  |  %%no change%%  |
|  %%DEBUG SHOW MULTI-CHASSIS LINKAGG [<aggId>] VLAN-LIST%%  |  %%no change%%  |
|  %%DEBUG SHOW MULTI-CHASSIS INFO%%  |  %%no change%%  |
===== SYSTEM SERVICES =====
^  6.4.2.R01 Command  ^  7.1.1.R01 Command  ^
|  %%UPDATE {MINIBOOT | UBOOT-MINIBOOT}%%  |  %%removed%%  |
|  %%update uboot cmm [<int>] [file <filename>]%%  |  %%no change%%  |
|  %%update uboot ni {<int> | all} [file <filename>]%%  |  %%no change%%  |
|  %%show update uboot cmm [<int>]%%  |  %%no change%%  |
|  %%show update uboot ni {<int> | all}%%  |  %%no change%%  |
|  %%MORE [<string> | SIZE]%%  |  %%replaced by linux version of command: more%%  |
|  %%NO MORE%%  |  %%removed%%  |
|  %%SHOW MORE%%  |  %%removed%%  |
|  %%LS [-R] [<string>]%%  |  %%replaced by linux version of command: ls%%  |
|  %%RM [-R] [<string>]%%  |  %%replaced by linux version of command: rm%%  |
|  %%CP [-R] [<string>]%%  |  %%replaced by linux version of command: cp%%  |
|  %%FSCK /FLASH [REPAIR | NO-REPAIR]%%  |  %%removed%%  |
|  %%FSCK /UFLASH [REPAIR | NO-REPAIR]%%  |  %%no change%%  |
|  %%NEWFS /FLASH%%  |  %%removed%%  |
|  %%DSHELL%%  |  %%removed%%  |
|  %%VIEW <string>%%  |  %%removed%%  |
|  %%TFTP {<string> | <ip_address>} {GET | PUT} SOURCE-FILE <string> [ASCII | DESTINATION-FILE <string>]%%  |  %%removed%%  |
|  %%MOUNT [/UFLASH]%%  |  %%no change%%  |
|  %%UMOUNT /UFLASH%%  |  %%no change%%  |
|  %%NEWFS /UFLASH%%  |  %%no change%%  |
|  %%BACKUP <string> <string>%%  |  %%removed%%  |
|  %%RESTORE <string> [DISPLAY-ONLY | <string>]%%  |  %%removed%%  |
|  %%FREESPACE [/FLASH]%%  |  %%freespace [/flash | /uflash]%%  |
|  %%new command%%  |  %%usb {enable | disable}%%  |
|  %%new command%%  |  %%usb auto-copy {enable | disable}%%  |
|  %%new command%%  |  %%show usb statistics%%  |
|  %%NO KTRACE%%  |  %%removed%%  |
|  %%SFTP <dest_address>%%  |  %%replaced by linux version of command: sftp%%  |
|  %%SSH {<dest_address> | ENABLE | DISABLE | ENFORCE PUBKEY-AUTH {ENABLE | DISABLE}}%%  |  %%replaced by linux version of command: ssh%%  |
|  %%SSH6 <dest_address>%%  |  %%removed%%  |
|  %%SFTP6 <dest_address>%%  |  %%removed%%  |
|  %%SHOW SSH CONFIG%%  |  %%removed%%  |
|  %%show history%%  |  %%history%%  |
|  %%history size <size>%%  |  %%removed%%  |
|  %%show history parameters%%  |  %%removed%%  |
|  %%DEBUG KTRACE [SHOW [LOG] | APPID <appid> LEVEL <level> | NO APPID <appid> | ENABLE | DISABLE]%%  |  %%removed%%  |
|  %%DEBUG SYSTRACE {ENABLE | DISABLE | SHOW [LOG <string>] | APPID <appid> LEVEL <level> | NO APPID <appid> | WATCH {ENABLE | DISABLE}}%%  |  %%removed%%  |
|  %%DEBUG ED <string>%%  |  %%removed%%  |
|  %%DEBUG TASKTRACE SHOW LOG%%  |  %%removed%%  |
|  %%SHOW SWLOG %%  |  %%show swlog [appid {<appname> | all}]%%  |
|  %%SHOW LOG SWLOG [TIMESTAMP <date> <time> | SESSION <int> | APPID <app> | LEVEL <level>]%%  |  %%show log swlog [slot <slot>]%%  |
|  %%SWLOG CONSOLE LEVEL level %%  |  %%no change%%  |
|  %%SWLOG OUTPUT opt_output%%  |  %%no change%%  |
|  %%NO SWLOG OUTPUT opt_output %%  |  %%no change%%  |
|  %%SWLOG CLEAR %%  |  %%swlog clear [slot {<int> | all}]%%  |
|  %%SWLOG OUTPUT FLASH FILE-SIZE integer %%  |  %%swlog output flash-file-size <size>%%  |
|  %%SWLOG OUTPUT SOCKET ipv6Address opt_integer optUserCmdHost %%  |  %%no change%%  |
|  %%NO SWLOG OUTPUT SOCKET ipv6Address %%  |  %%no change%%  |
|  %%SWLOG OUTPUT SOCKET ipAddress opt_integer optUserCmdHost %%  |  %%no change%%  |
|  %%NO SWLOG OUTPUT SOCKET ipAddress %%  |  %%no change%%  |
|  %%SWLOG REMOTE COMMAND-LOG on_off %%  |  %%no change%%  |
|  %%SWLOG SYSLOG-FACILITY-ID syslogFacilityIdList%%  |  %%no change%%  |
|  %%[NO] SWLOG%%  |  %%swlog [appid {<appname> | all}  subapp {<0-31> | all}] {enable | disable}%%  |
|  %%SWLOG APPID appIdList LEVEL level%%  |  %%swlog appid <name>  subapp <0-31> level <num> [vrf <vrf>]%%  |
|  %%NO SWLOG APPID appIdList%%  |  %%removed%%  |
|  %%new command%%  |  %%[no] swlog preamble%%  |
|  %%new command%%  |  %%[no] swlog duplicate-detect%%  |
|  %%new command%%  |  %%[no] debug swlog%%  |
|  %%new command%%  |  %%swlog hash-time-limit <limit>%%  |
|  %%new command%%  |  %%swlog output tty {enable | disable}%%  |
|  %%session banner {cli | ftp | http} <file_name >%%  |  %%session {cli|ftp|http} banner <file_name>%%  |
|  %%session banner no {cli | ftp | http} %%  |  %%no session {cli|ftp|http} banner %%  |
|  %%session timeout {cli | http | ftp} <minutes> %%  |  %%session {cli|ftp|http} timeout <minutes>%%  |
|  %%session {ftp | tftp | sftp | telnet} port <port>%%  |  %%ip service {ftp | ssh | telnet} port {default | <port>}%%  |
|  %%session prompt default <string>%%  |  %%no change%%  |
|  %%who%%  |  %%no change%%  |
|  %%kill <pid>%%  |  %%no change%%  |
|  %%show session config%%  |  %%no change%%  |
|  %%whoami%%  |  %%no change%%  |
|  %%tty <int> <int>%%  |  %%no change%%  |
|  %%show tty%%  |  %%no change%%  |
|  %%chmod {+w | -w} <string>%%  |  %%no change%%  |
|  %%session login-timeout <val>%%  |  %%no change%%  |
|  %%session login-attemp <val>%%  |  %%no change%%  |
|  %%command-log {enable | disable}%%  |  %%no change%%  |
|  %%show command-log [status]%%  |  %%no change%%  |
|  %%show session xon-off%%  |  %%no change%%  |
|  %%session xon-off {enable | disable}%%  |  %%no change%%  |
|  %%IP DOMAIN-LOOKUP%%  |  %%no change%%  |
|  %%NO IP DOMAIN-LOOKUP%%  |  %%no change%%  |
|  %%IP NAME-SERVER {<ip_address>}+%%  |  %%no change%%  |
|  %%NO IP NAME-SERVER {ALL | <ip_address>}%%  |  %%no change%%  |
|  %%IP DOMAIN-NAME <domain-name>%%  |  %%no change%%  |
|  %%NO IP DOMAIN-NAME%%  |  %%no change%%  |
|  %%SHOW DNS%%  |  %%no change%%  |
|  %%IPV6 NAME-SERVER {ipv6Address}+%%  |  %%no change%%  |
|  %%NSLOOKUP {string | <ip_address>}%%  |  %%no change%%  |
|  %%AUTO KEYWORD COMPLETION [enable | disable]%%  |  %%no change%%  |
|  %%NO AUTO KEYWORD COMPLETION%%  |  %%no change%%  |
|  %%VERBOSE HELP [enable | disable]%%  |  %%no change%%  |
|  %%NO VERBOSE HELP%%  |  %%no change%%  |
|  %%SHOW PREFIX%%  |  %%no change%%  |
|  %%NO PREFIX%%  |  %%no change%%  |
|  %%USER PROFILE {SAVE | RESET}%%  |  %%no change%%  |
|  %%PROMPT [none | time | system | user | date | prefix | string <prompt>]%%  |  %%no change%%  |
|  %%modify boot parameters%%  |  %%no change%%  |
|  %%upgrade ni <int> license-key <"string">%%  |  %%removed%%  |
|  %%exit%%  |  %%replaced by linux version of command: exit%%  |
|  %%kill <int>%%  |  %%no change%%  |
|  %%alias <string> <string>%%  |  %%replaced by linux version of command: alias%%  |
|  %%no alias [all | <string>]%%  |  %%replaced by linux version of command: unalias%%  |
|  %%show alias [all | <string>]%%  |  %%replaced by linux version of command: alias%%  |
|  %%cd [<directory>]%%  |  %%replaced by linux version of command: cd%%  |
|  %%pwd%%  |  %%replaced by linux version of command: pwd%%  |
|  %%mkdir [<directory>]%%  |  %%replaced by linux version of command: mkdir%%  |
|  %%rmdir [<directory>]%%  |  %%replaced by linux version of command: rmdir%%  |
|  %%dir [<directory>]%%  |  %%replaced by linux version of command: ls%%  |
|  %%rename <file1> <file2>%%  |  %%replaced by linux version of command: mv%%  |
|  %%delete <file>%%  |  %%replaced by linux version of command: rm%%  |
|  %%mv <file1> <string>%%  |  %%replaced by linux version of command: mv%%  |
|  %%move <file1> <string>%%  |  %%replaced by linux version of command: mv%%  |
|  %%attrib {+w | -w} <string>%%  |  %%removed: same command as chmod%%  |
|  %%ftp {<string> | <ip_address>}%%  |  %%replaced by linux version of command: ftp%%  |
|  %%vi <filename>%%  |  %%replaced by linux version of command: vi%%  |
|  %%telnet {<string> | <ip_address>}%%  |  %%replaced by linux version of command: telnet%%  |
|  %%scp {<string> | <ip_address>} {<string> | <ip_address>}%%  |  %%replaced by linux version of command: scp%%  |
|  %%aclman%%  |  %%removed%%  |
|  %%rz%%  |  %%removed%%  |
|  %%install {<string>}+%%  |  %%removed%%  |
|  %%scp-sftp {enable | disable}%%  |  %%removed%%  |
|  %%ftp6 {<string> | <ipv6_address>}  <interface>%%  |  %%removed%%  |
|  %%telnet6 {<string> | <ipv6_address>} <interface>%%  |  %%removed%%  |
|  %%debug memory monitor {enable | disable}%%  |  %%removed%%  |
|  %%debug memory monitor show log [global | task | size]%%  |  %%removed%%  |
|  %%debug memory monitor show status%%  |  %%removed%%  |
|  %%show log pmd <string> [type <string> | id <id> | taskname <name> | taskid <id> | record <string> | address <int> | subid <int>]%%  |  %%removed%%  |
|  %%debug show pmd <int> <int> <int> <int>%%  |  %%removed%%  |
|  %%debug pmd show <int> <int> <int> <int>%%  |  %%removed%%  |
|  %%debug remove pmd <int> <int> <int> <int>%%  |  %%removed%%  |
|  %%debug pmd remove <int> <int> <int> <int>%%  |  %%removed%%  |
|  %%debug dump pmd <int> <int> <int> <int> <string>%%  |  %%removed%%  |
|  %%debug pmd dump <int> <int> <int> <int> <string>%%  |  %%removed%%  |
|  %%debug pmd ni%%  |  %%removed%%  |
|  %%AUTO KEYWORD COMPLETION [ENABLE | DISABLE]%%  |  %%removed: not supported%%  |
|  %%NO AUTO KEYWORD COMPLETION%%  |  %%removed: not supported%%  |
|  %%PROMPT [NONE] [TIME | SYSTEM | USER | DATE | PREFIX | STRING <string>]*%%  |  %%removed: use 'export PS1="prompt string->"%%  |
===== AAA =====
^  6.4.2.R01 Command  ^  7.1.1.R01 Command  ^
|  %%AAA RADIUS AGENT PREFERRED {DEFAULT | NO-LOOPBACK | <ip_address>}%%  |  %%removed%%  |
|  %%NO AAA RADIUS AGENT PREFERRED%%  |  %%removed%%  |
|  %%new command%%  |  %%USER admin CONSOLE-ONLY {ENABLE | DISABLE}%%  |
|  %%USER “user_name” END-USER-PROFILE <string>%%  |  %%removed%%  |
|  %%USER “user_name” NO END-USER-PROFILE%%  |  %%removed%%  |
|  %%END-USER PROFILE %%  |  %%removed%%  |
|  %%NO END-USER PROFILE %%  |  %%removed%%  |
|  %%SHOW END-USER PROFILE %%  |  %%removed%%  |
|  %%DEBUG END-USER PROFILE %%  |  %%removed%%  |
|  %%SHOW USER PASSWORD-EXPIRATION%%  |  %%removed%%  |
|  %%SHOW USER PASSWORD-SIZE%%  |  %%removed%%  |
|  %%AAA RADIUS-AGENT%%  |  %%removed%%  |
|  %%AAA ACE-SERVER%%  |  %%removed%%  |
===== BFD =====
^  6.4.2.R01 Command  ^  7.1.1.R01 Command  ^
|  %% All cmds have optional VRF prefix [vrf {vrf_name}]%%  |  %% All cmds have optional VRF prefix [vrf {vrf_name}]%%  |
|  %%ip bfd-std status {enable | disable}%%  |  %%ip bfd admin-state {enable | disable}%%  |
|  %%ip bfd-std transmit transmit-interval%%  |  %%ip bfd transmit <transmit-interval>%%  |
|  %%ip bfd-std receive receive-interval%%  |  %%ip bfd receive <receive-interval>%%  |
|  %%ip bfd-std mode {echo-only | demand echo {enable | disable} | asynchronous echo {enable|disable}}%%  |  %%ip bfd mode {echo-only | demand [echo-state {enable | disable}] | asynchronous [echo-state {enable | disable}] }%%  |
|  %%ip bfd-std echo status {enable | disable}%%  |  %%ip bfd echo-state {enable | disable}%%  |
|  %%ip bfd-std echo interval echo-interval%%  |  %%ip bfd echo-interval <echo-interval>%%  |
|  %%ip bfd-std 12-hold-timer l2-holdtimer-interval%%  |  %%ip bfd 12-hold-timer <l2-holdtimer-interval>%%  |
|  %%ip bfd-std interface interface_name%%  |  %%ip bfd interface <interface_name>%%  |
|  %%no ip bfd-std interface interface_name%%  |  %%no ip bfd interface <interface_name>%%  |
|  %%ip bfd-std interface interface_name status {enable | disable}%%  |  %%ip bfd interface <interface_name> admin-state {enable | disable}%%  |
|  %%ip bfd-std interface interface_name transmit transmit-interval%%  |  %%ip bfd interface <interface_name> transmit <transmit-interval>%%  |
|  %%ip bfd-std interface interface_name receive receive-interval%%  |  %%ip bfd interface <interface_name> receive <receive-interval>%%  |
|  %%ip bfd-std interface interface_name multiplier multiplier_value%%  |  %%ip bfd interface <interface_name> multiplier <multiplier_value>%%  |
|  %%ip bfd-std interface interface_name echo-interval echo-interval%%  |  %%ip bfd interface <interface_name> echo-interval <echo-interval>%%  |
|  %%ip bfd-std interface interface_name mode {echo-only | demand [echo {enable | disable}] | asynchronous [echo {enable|disable}}%%  |  %%ip bfd interface <interface_name> mode {echo-only | demand [echo-state {enable | disable}] | asynchronous [echo-state {enable | disable}] }%%  |
|  %%ip bfd-std interface interface_name 12-hold-timer l2-holdtimer-interval%%  |  %%ip bfd interface <interface_name> 12-hold-timer <l2-holdtimer-interval>%%  |
|  %%ip ospf bfd-std status {enable | disable}%%  |  %%ip ospf bfd-state {enable | disable}%%  |
|  %%[no] ip ospf bfd-std all-interfaces%%  |  %%ip ospf bfd-state all-interfaces {enable | disable}%%  |
|  %%ip ospf interface interface-name bfd-std {enable | disable}%%  |  %%ip ospf interface <interface-name> bfd-state {enable | disable}%%  |
|  %%ip ospf interface interface-name bfd-std drs-only%%  |  %%ip ospf interface <interface-name> bfd-state drs-only%%  |
|  %%ip ospf interface interface-name bfd-std all-nbrs%%  |  %%ip ospf interface <interface-name> bfd-state all-neighbors {enable | disable}%%  |
|  %%ip bgp bfd-std status {enable | disable}%%  |  %%ip bgp bfd-state {enable | disable}%%  |
|  %%[no] ip bgp bfd-std all-neighbors%%  |  %%ip bgp bfd-state all-neighbors {enable | disable}%%  |
|  %%ip bgp neighbor name bfd-std {enable | disable}%%  |  %%ip bgp neighbor <ip_address> bfd-state {enable | disable}%%  |
|  %%vrrp bfd-std {enable | disable}%%  |  %%vrrp bfd-state {enable | disable}%%  |
|  %%vrrp track num address address bfd-std {enable| disable}%%  |  %%vrrp track <num> address <address> bfd-state {enable| disable}%%  |
|  %%show ip bfd-std%%  |  %%show ip bfd%%  |
|  %%show ip bfd-std interfaces [interface-name]%%  |  %%show ip bfd interfaces [<interface-name>]%%  |
|  %%show ip bfd-std [session <num> ] [sessions [slot <num>]%%  |  %%show ip bfd sessions [<num>] [slot <num>]%%  |
|  %%new command%%  |  %%ip bfd multiplier <num>%%  |
|  %%new command%%  |  %%show ip bfd sessions statistics [<num>]%%  |
===== BGP =====
^  6.4.2.R01 Command  ^  7.1.1.R01 Command  ^
|  %%642 Commands %%  |  %%711 Commands %%  |
|  %%VRF Prefix on all ipv4 (ip) cmds [vrf {vrf_name}]%%  |  %%VRF Prefix on all ipv4 (ip) cmds [vrf {vrf_name}]%%  |
|  %%ip load bgp%%  |  %%no change%%  |
|  %%ip bgp status {enable | disable}%%  |  %%ip bgp admin-state {enable | disable}%%  |
|  %%ip bgp unicast%%  |  %%no change%%  |
|  %%no ip bgp unicast%%  |  %%no change%%  |
|  %%ip bgp autonomous-system value%%  |  %%no change%%  |
|  %%ip bgp bestpath as-path ignore%%  |  %%no change%%  |
|  %%no ip bgp bestpath as-path ignore%%  |  %%no change%%  |
|  %%ip bgp cluster-id ip_address%%  |  %%no change%%  |
|  %%ip bgp default local-preference value%%  |  %%no change%%  |
|  %%ip bgp fast-external-failover%%  |  %%no change%%  |
|  %%no ip bgp fast-external-failover%%  |  %%no change%%  |
|  %%ip bgp always-compare-med%%  |  %%no change%%  |
|  %%no ip bgp always-compare-med%%  |  %%no change%%  |
|  %%ip bgp bestpath med missing-as-worst%%  |  %%no change%%  |
|  %%no ip bgp bestpath med missing-as-worst%%  |  %%no change%%  |
|  %%ip bgp client-to-client reflection%%  |  %%no change%%  |
|  %%no ip bgp client-to-client reflection%%  |  %%no change%%  |
|  %%ip bgp as-origin-interval seconds%%  |  %%no change%%  |
|  %%no ip bgp as-origin-interval%%  |  %%no change%%  |
|  %%ip bgp synchronization%%  |  %%no change%%  |
|  %%no ip bgp synchronization%%  |  %%no change%%  |
|  %%ip bgp confederation identifier value%%  |  %%no change%%  |
|  %%ip bgp maximum-paths%%  |  %%no change%%  |
|  %%no ip bgp maximum-paths%%  |  %%no change%%  |
|  %%ip bgp log-neighbor-changes%%  |  %%no change%%  |
|  %%no ip bgp log-neighbor-changes%%  |  %%no change%%  |
|  %%ip bgp dampening [half-life half_life reuse reuse suppress suppress max-suppress-time max_suppress_time]%%  |  %%no change%%  |
|  %%no ip bgp dampening%%  |  %%no change%%  |
|  %%ip bgp dampening clear%%  |  %%no change%%  |
|  %%ip bgp aggregate-address ip_address ip_mask%%  |  %%no change%%  |
|  %%no ip bgp aggregate-address ip_address ip_mask%%  |  %%no change%%  |
|  %%ip bgp aggregate-address ip_address ip_mask status {enable | disable}%%  |  %%ip bgp aggregate-address <ip_address> <ip_mask> admin-state {enable | disable}%%  |
|  %%ip bgp aggregate-address ip_address ip_mask as-set%%  |  %%no change%%  |
|  %%no ip bgp aggregate-address ip_address ip_mask as-set%%  |  %%no change%%  |
|  %%ip bgp aggregate-address ip_address ip_mask community string%%  |  %%no change%%  |
|  %%ip bgp aggregate-address ip_address ip_mask local-preference value%%  |  %%no change%%  |
|  %%no ip bgp aggregate-address ip_address ip_mask local-preference value%%  |  %%no change%%  |
|  %%ip bgp aggregate-address ip_address ip_mask metric value%%  |  %%no change%%  |
|  %%no ip bgp aggregate-address ip_address ip_mask metric value%%  |  %%no change%%  |
|  %%ip bgp aggregate-address ip_address ip_mask summary-only%%  |  %%no change%%  |
|  %%no ip bgp aggregate-address ip_address ip_mask summary-only%%  |  %%no change%%  |
|  %%ip bgp network network_address ip_mask%%  |  %%no change%%  |
|  %%no ip bgp network network_address ip_mask%%  |  %%no change%%  |
|  %%ip bgp network network_address ip_mask status {enable | disable}%%  |  %%ip bgp network <network_address> <ip_mask> admin-state {enable | disable}%%  |
|  %%ip bgp network network_address ip_mask community string%%  |  %%no change%%  |
|  %%ip bgp network network_address ip_mask local-preference value%%  |  %%no change%%  |
|  %%no ip bgp network network_address ip_mask local-preference value%%  |  %%no change%%  |
|  %%ip bgp network network_address ip_mask metric value%%  |  %%no change%%  |
|  %%no ip bgp network network_address ip_mask metric value%%  |  %%no change%%  |
|  %%ip bgp neighbor ip_address%%  |  %%no change%%  |
|  %%no ip bgp neighbor ip_address%%  |  %%no change%%  |
|  %%ip bgp neighbor ip_address status {enable | disable}%%  |  %%ip bgp neighbor <ip_address> admin-state {enable | disable}%%  |
|  %%ip bgp neighbor ip_address advertisement-interval value%%  |  %%no change%%  |
|  %%ip bgp neighbor ip_address clear%%  |  %%no change%%  |
|  %%ip bgp neighbor ip_address route-reflector-client%%  |  %%no change%%  |
|  %%no ip bgp neighbor ip_address route-reflector-client%%  |  %%no change%%  |
|  %%ip bgp neighbor ip_address default-originate%%  |  %%no change%%  |
|  %%no ip bgp neighbor ip_address default-originate%%  |  %%no change%%  |
|  %%ip bgp neighbor ip_address timers keepalive holdtime%%  |  %%no change%%  |
|  %%ip bgp neighbor ip_address conn-retry-interval seconds%%  |  %%no change%%  |
|  %%ip bgp neighbor ip_address auto-restart%%  |  %%no change%%  |
|  %%ip bgp neighbor ip_address maximum-prefix maximum [warning-only]%%  |  %%no change%%  |
|  %%ip bgp neighbor ip_address md5 key {string | none}%%  |  %%no change%%  |
|  %%ip bgp neighbor ip_address md5 key-encrypt encrypted_string%%  |  %%no change%%  |
|  %%ip bgp neighbor ip_address ebgp-multihop [ttl]%%  |  %%no change%%  |
|  %%no ip bgp neighbor ip_address ebgp-multihop%%  |  %%no change%%  |
|  %%ip bgp neighbor ip_address description string%%  |  %%no change%%  |
|  %%ip bgp neighbor ip_address next-hop-self%%  |  %%no change%%  |
|  %%no ip bgp neighbor ip_address next-hop-self%%  |  %%no change%%  |
|  %%ip bgp neighbor ip_address passive%%  |  %%no change%%  |
|  %%no ip bgp neighbor ip_address passive%%  |  %%no change%%  |
|  %%ip bgp neighbor ip_address remote-as value%%  |  %%no change%%  |
|  %%ip bgp neighbor ip_address remove-private-as%%  |  %%no change%%  |
|  %%no ip bgp neighbor ip_address remove-private-as%%  |  %%no change%%  |
|  %%ip bgp neighbor ip_address soft-reconfiguration%%  |  %%no change%%  |
|  %%no ip bgp neighbor ip_address soft-reconfiguration%%  |  %%no change%%  |
|  %%ip bgp neighbor ip_address stats-clear%%  |  %%no change%%  |
|  %%ip bgp confederation neighbor ip_address%%  |  %%no change%%  |
|  %%no ip bgp confederation neighbor ip_address%%  |  %%no change%%  |
|  %%ip bgp neighbor ip_address update-source [interface_name]%%  |  %%no change%%  |
|  %%ip bgp neighbor ip_address in-aspathlist {string | none}%%  |  %%no change%%  |
|  %%ip bgp neighbor ip_address in-communitylist {string | none}%%  |  %%no change%%  |
|  %%ip bgp neighbor ip_address in-prefixlist {string | none}%%  |  %%no change%%  |
|  %%ip bgp neighbor peer_address in-prefix6list pfx_list_name%%  |  %%no change%%  |
|  %%ip bgp neighbor peer_address out-prefix6list pfx_list_name%%  |  %%no change%%  |
|  %%ip bgp neighbor ip_address out-aspathlist {string | none}%%  |  %%no change%%  |
|  %%ip bgp neighbor ip_address out-communitylist {string | none}%%  |  %%no change%%  |
|  %%ip bgp neighbor ip_address out-prefixlist {string | none}%%  |  %%no change%%  |
|  %%ip bgp neighbor ip_address route-map {string | none} {in | out}%%  |  %%no change%%  |
|  %%no ip bgp neighbor ip_address route-map {in | out}%%  |  %%no change%%  |
|  %%ip bgp neighbor ip_address clear soft {in | out}%%  |  %%no change%%  |
|  %%ip bgp policy aspath-list name “regular_expression”%%  |  %%no change%%  |
|  %%no ip bgp policy aspath-list name “regular_expression”%%  |  %%no change%%  |
|  %%ip bgp policy aspath-list name “regular_expression” action {permit | deny}%%  |  %%no change%%  |
|  %%ip bgp policy aspath-list name “regular_expression” priority value%%  |  %%no change%%  |
|  %%ip bgp policy community-list name {none | no-export | no-advertise | no-export-subconfed | num:num}%%  |  %%no change%%  |
|  %%no ip bgp policy community-list name {none | no-export | no-advertise | no-export-subconfed | num:num}%%  |  %%no change%%  |
|  %%ip bgp policy community-list name {none | no-export | no-advertise | no-export-subconfed | num:num} action {permit | deny}%%  |  %%no change%%  |
|  %%ip bgp policy community-list name {none | no-export | no-advertise | no-export-subconfed | num:num} match-type {exact | occur}%%  |  %%no change%%  |
|  %%ip bgp policy community-list name {none | no-export | no-advertise | no-export-subconfed | num:num} priority value%%  |  %%no change%%  |
|  %%ip bgp policy prefix-list name ip_address ip_mask%%  |  %%no change%%  |
|  %%no ip bgp policy prefix-list name ip_address ip_mask%%  |  %%no change%%  |
|  %%ip bgp policy prefix-list name ip_address ip_mask action {permit | deny}%%  |  %%no change%%  |
|  %%ip bgp policy prefix-list name ip_address ip_mask ge value%%  |  %%no change%%  |
|  %%ip bgp policy prefix-list name ip_address ip_mask le value%%  |  %%no change%%  |
|  %%ip bgp policy prefix6-list pfx_list_name prefix6/pfx_length [action{permit|deny}] [status{enable|disable}] [ge[{masklength}]] [le[{masklength}]]%%  |  %%ip bgp policy prefix6-list <pfx_list_name> <prefix6/pfx_length> [action{permit|deny}] [admin-state {enable|disable}] [ge[{<masklength>}]] [le[{<masklength>}]]%%  |
|  %%no ip bgp policy prefix6-list pfx_list_name prefix6/pfx_length [action{permit|deny}]%%  |  %%no change%%  |
|  %%ip bgp policy route-map name sequence_number%%  |  %%no change%%  |
|  %%ip bgp policy route-map name sequence_number action {permit | deny}%%  |  %%no change%%  |
|  %%ip bgp policy route-map name sequence_number aspath-list as_name%%  |  %%no change%%  |
|  %%ip bgp policy route-map name sequence_number asprepend path%%  |  %%no change%%  |
|  %%ip bgp policy route-map name sequence_number community [none | no-export | no-advertise | no-export-subconfed | num:num]%%  |  %%no change%%  |
|  %%ip bgp policy route-map name sequence_number community-list name%%  |  %%no change%%  |
|  %%ip bgp policy route-map name sequence_number community-mode {add | replace}%%  |  %%no change%%  |
|  %%ip bgp policy route-map name sequence_number lpref value%%  |  %%no change%%  |
|  %%ip bgp policy route-map name sequence_number lpref-mode {none | inc | dec | rep}%%  |  %%no change%%  |
|  %%ip bgp policy route-map name sequence_number match-community [none | no-export | noadvertise | no-export-subconfed | num:num]%%  |  %%no change%%  |
|  %%ip bgp policy route-map name sequence_number match-mask ip_address%%  |  %%no change%%  |
|  %%ip bgp policy route-map name sequence_number match-prefix ip_address%%  |  %%no change%%  |
|  %%ip bgp policy route-map name sequence_number match-regexp “regular_expression”%%  |  %%no change%%  |
|  %%ip bgp policy route-map name sequence_number med value%%  |  %%no change%%  |
|  %%ip bgp policy route-map name sequence_number med-mode {none | inc | dec | rep}%%  |  %%no change%%  |
|  %%ip bgp policy route-map name sequence_number origin {igp | egp| incomplete | none}%%  |  %%no change%%  |
|  %%ip bgp policy route-map name sequence_number prefix-list prefix_name%%  |  %%no change%%  |
|  %%ip bgp policy route-map name sequence_number weight value%%  |  %%no change%%  |
|  %%ip bgp policy route-map name sequence_number community-strip community_list%%  |  %%no change%%  |
|  %%show ip bgp%%  |  %%no change%%  |
|  %%show ip bgp statistics%%  |  %%no change%%  |
|  %%show ip bgp dampening%%  |  %%no change%%  |
|  %%show ip bgp dampening-stats [ip_address ip_mask] [peer_address]%%  |  %%no change%%  |
|  %%show ip bgp path%%  |  %%no change%%  |
|  %%show ip bgp routes [network_address ip_mask]%%  |  %%no change%%  |
|  %%show ip bgp aggregate-address [ip_address ip mask]%%  |  %%no change%%  |
|  %%show ip bgp network [network_address ip_mask]%%  |  %%no change%%  |
|  %%show ip bgp neighbors [ip_address]%%  |  %%no change%%  |
|  %%show ip bgp neighbors policy ipv4_address%%  |  %%no change%%  |
|  %%show ip bgp neighbors timer [ip_address]%%  |  %%no change%%  |
|  %%show ip bgp neighbors statistics [ip_address]%%  |  %%no change%%  |
|  %%show ip bgp policy aspath-list [name] [“regular_expression”]%%  |  %%no change%%  |
|  %%show ip bgp policy community-list [name] [string]%%  |  %%no change%%  |
|  %%show ip bgp policy prefix-list [name] [ip_address ip_mask]%%  |  %%no change%%  |
|  %%show ip bgp policy prefix6-list [pfx_list_name[{prefix6/prefix_length}]]%%  |  %%no change%%  |
|  %%show ip bgp policy route-map [name] [sequence_number]%%  |  %%no change%%  |
|  %%ip bgp graceful-restart%%  |  %%no change%%  |
|  %%no ip bgp graceful-restart%%  |  %%no change%%  |
|  %%ip bgp graceful-restart restart-interval [seconds]%%  |  %%no change%%  |
|  %%ipv6 bgp unicast%%  |  %%no change%%  |
|  %%no ipv6 bgp unicast%%  |  %%no change%%  |
|  %%ip bgp neighbor ip_address activate-ipv6%%  |  %%no change%%  |
|  %%no ip bgp neighbor ip_address activate-ipv6%%  |  %%no change%%  |
|  %%ip bgp neighbor ip_address ipv6-nexthop ipv6_address%%  |  %%no change%%  |
|  %%show ipv6 bgp path [ipv6-addr ipv6_address/prefix_length]%%  |  %%no change%%  |
|  %%show ipv6 bgp routes%%  |  %%no change%%  |
|  %%ipv6 bgp network ipv6_address/prefix_length%%  |  %%no change%%  |
|  %%no ipv6 bgp network ipv6_address/prefix_length%%  |  %%no change%%  |
|  %%ipv6 bgp network ipv6_address/prefix_length [community {none | num | num:num}]%%  |  %%no change%%  |
|  %%ipv6 bgp network ipv6_address/prefix_length [local-preference num]%%  |  %%no change%%  |
|  %%ipv6 bgp network ipv6_address/prefix_length [metric num]%%  |  %%no change%%  |
|  %%ipv6 bgp network ipv6_address/prefix_length [status {enable | disable}]%%  |  %%ipv6 bgp network <ipv6_address/prefix_length> [admin-state {enable | disable}]%%  |
|  %%show ipv6 bgp network [ipv6_address/prefix_length]%%  |  %%no change%%  |
|  %%ipv6 bgp neighbor ipv6_address%%  |  %%no change%%  |
|  %%no ipv6 bgp neighbor ipv6_address%%  |  %%no change%%  |
|  %%ipv6 bgp neighbor peer6_address clear soft {in | out}%%  |  %%no change%%  |
|  %%ipv6 bgp neighbor peer6_address soft-reconfiguration%%  |  %%no change%%  |
|  %%no ipv6 bgp neighbor peer6_address soft-reconfiguration%%  |  %%no change%%  |
|  %%ipv6 bgp neighbor peer6_address in-prefix6list pfx_list_name%%  |  %%no change%%  |
|  %%ipv6 bgp neighbor peer6_address out-prefix6list pfx_list_name%%  |  %%no change%%  |
|  %%ipv6 bgp neighbor ipv6_address [activate-ipv6]%%  |  %%no change%%  |
|  %%no ipv6 bgp neighbor ipv6_address [activate-ipv6]%%  |  %%no change%%  |
|  %%ipv6 bgp neighbor ipv6_address [ipv6-nexthop ipv6_address]%%  |  %%no change%%  |
|  %%ipv6 bgp neighbor ipv6_address [status {enable | disable}]%%  |  %%ipv6 bgp neighbor <ipv6_address> [admin-state {enable | disable}]%%  |
|  %%ipv6 bgp neighbor ipv6_address [remote-as num]%%  |  %%no change%%  |
|  %%ipv6 bgp neighbor ipv6_address [timers num num]%%  |  %%no change%%  |
|  %%ipv6 bgp neighbor ipv6_address [maximum-prefix num [warning-only]]%%  |  %%no change%%  |
|  %%no ipv6 bgp neighbor ipv6_address [maximum-prefix num [warning-only]]%%  |  %%no change%%  |
|  %%ipv6 bgp neighbor ipv6_address [next-hop-self]%%  |  %%no change%%  |
|  %%no ipv6 bgp neighbor ipv6_address [next-hop-self]%%  |  %%no change%%  |
|  %%ipv6 bgp neighbor ipv6_address [conn-retry-interval num]%%  |  %%no change%%  |
|  %%ipv6 bgp neighbor ipv6_address [default-originate]%%  |  %%no change%%  |
|  %%no ipv6 bgp neighbor ipv6_address [default-originate]%%  |  %%no change%%  |
|  %%ipv6 bgp neighbor ipv6_address [update-source interface_name]%%  |  %%no change%%  |
|  %%no ipv6 bgp neighbor ipv6_address [update-source interface_name]%%  |  %%no change%%  |
|  %%ipv6 bgp neighbor ipv6_address [ipv4-nexthop ip_address]%%  |  %%no change%%  |
|  %%show ipv6 bgp neighbors [ipv6_address]%%  |  %%no change%%  |
|  %%show ipv6 bgp neighbors statistics [ipv6_address]%%  |  %%no change%%  |
|  %%show ipv6 bgp neighbors timers [ipv6_address]%%  |  %%no change%%  |
|  %%show ipv6 bgp neighbors policy ipv6_address%%  |  %%no change%%  |
===== CAPABILITY MANAGER =====
^  6.4.2.R01 Command  ^  7.1.1.R01 Command  ^
|  %%hash-control brief%%  |  %%no change%%  |
|  %%hash-control extended [[no] udp-tcp-port]%%  |  %%no change%%  |
|  %%new command%%  |  %%hash-control load-balance non-ucast {enable | disable}%%  |
|  %%show hash-control%%  |  %%no change%%  |
|  %%new command%%  |  %%show hash-control non-ucast%%  |
|  %%new command%%  |  %%show escalation-strategy [<slot-id>]%%  |
===== CONFIG MANAGER =====
^  6.4.2.R01 Command  ^  7.1.1.R01 Command  ^
|  %%configuration apply <filename> [verbose]%%  |  %%no change%%  |
|  %%configuration syntax check <filename> [verbose]%%  |  %%configuration syntax-check <filename> [verbose]%%  |
|  %%configuration apply <filename> [<time>]%%  |  %%no change%%  |
|  %%show configuration status%%  |  %%no change%%  |
|  %%configuration cancel%%  |  %%no change%%  |
|  %%configuration snapshot <appname>%%  |  %%no change%%  |
|  %%show configuration snapshot [<appname>]%%  |  %%no change%%  |
|  %%configuration error-file limit <limit>%%  |  %%configuration error-file-limit <limit>%%  |
|  %%SHOW TECH-SUPPORT%%  |  %%no change%%  |
|  %%SHOW TECH-SUPPORT LAYER2%%  |  %%no change%%  |
|  %%SHOW TECH-SUPPORT LAYER3%%  |  %%no change%%  |
|  %%SHOW TECH-SUPPORT LAYER3 RIP %%  |  %%no change%%  |
|  %%SHOW TECH-SUPPORT LAYER3 OSPF%%  |  %%no change%%  |
|  %%SHOW TECH-SUPPORT LAYER3 BGP %%  |  %%no change%%  |
|  %%SHOW TECH-SUPPORT LAYER3 PIM %%  |  %%no change%%  |
|  %%SHOW TECH-SUPPORT LAYER3 MROUTE %%  |  %%no change%%  |
|  %%SHOW TECH-SUPPORT LAYER3 DVMRP%%  |  %%no change%%  |
|  %%SHOW TECH-SUPPORT LAYER3 IPV6%%  |  %%no change%%  |
|  %%SHOW TECH-SUPPORT LAYER3 RIPNG%%  |  %%no change%%  |
|  %%SHOW TECH-SUPPORT LAYER3 OSPF3%%  |  %%no change%%  |
|  %%SHOW TECH-SUPPORT LAYER3 ISIS%%  |  %%no change%%  |
|  %%SHOW TECH-SUPPORT LAYER3 PIM6%%  |  %%no change%%  |
|  %%SHOW TECH-SUPPORT LAYER3 IPSEC%%  |  %%no change%%  |
|  %%SHOW TECH-SUPPORT LAYER3 BFD%%  |  %%no change%%  |
===== ERP =====
^  6.4.2.R01 Command  ^  7.1.1.R01 Command  ^
|  %%642Commands%%  |  %%711Commands%%  |
|  %%erp-ring ring_id port1 {slot/port | linkagg agg_num} port2 {slot/port | linkagg agg_num} service-vlan vlan_id level level_num [guard-timer guard_timer] [wait-torestore- timer wtr_timer] [enable | disable]%%  |  %%no change%%  |
|  %%no erp-ring ring_id%%  |  %%no change%%  |
|  %%erp-ring ring_id rpl-node {port slot/port | linkagg agg_num}%%  |  %%no change%%  |
|  %%no erp-ring ring_id rpl-node%%  |  %%no change%%  |
|  %%erp-ring ring_id wait-to-restore wtr_timer%%  |  %%no change%%  |
|  %%no erp-ring ring_id wait-to-restore%%  |  %%no change%%  |
|  %%erp-ring ring_id {enable | disable}%%  |  %%no change%%  |
|  %%erp-ring ring_id ethoam-event {port slot/port | linkagg agg_num} remote-endpoint mep_id%%  |  %%no change%%  |
|  %%no erp-ring ring_id ethoam-event {port slot/port | linkagg agg_num}%%  |  %%no change%%  |
|  %%erp-ring ring_id guard-timer guard_timer%%  |  %%no change%%  |
|  %%no erp-ring ring_id guard-timer%%  |  %%no change%%  |
|  %%clear erp statistics [ring ring_id [port slot/port | linkagg agg_num]]%%  |  %%no change%%  |
|  %%show erp [ring ring_id | [port slot/port | linkagg agg_num]]%%  |  %%no change%%  |
|  %%show erp [ring ring_id] protected-vlan%%  |  %%no change%%  |
|  %%show erp statistics [ring ring_id [port slot/port | linkagg agg_num]]%%  |  %%no change%%  |
|  %%new command%%  |  %%erp-ring <ring_id> {port <slot/port> | linkagg <id>} virtual-sf-monitor {enable | disable}%%  |
===== ESM =====
^  6.4.2.R01 Command  ^  7.1.1.R01 Command  ^
|  %%642Commands%%  |  %%711Commands%%  |
|  %%interfaces {<slot> | <slot/port[-port2]>} {admin | autoneg } {enable|disable} %%  |  %%interfaces {<slot> | <slot/port[-port2]>} {admin-state | autoneg } {enable|disable} %%  |
|  %%trap slot[/port[-port2]] port link {enable | disable | on | off}%%  |  %%interfaces {<slot> | <slot/port1[-port2]>} link-trap {enable|disable} %%  |
|  %%interfaces {<slot> | <slot/port[-port2]>} crossover {mdix | mdi | auto} %%  |  %%no change%%  |
|  %%interfaces {<slot> | <slot/port[-port2]>} duplex {half | full | auto}%%  |  %%no change%%  |
|  %%interfaces slot[/port[-port2]] speed {auto | 10 | 100 | 1000 | 10000 | max {100 | 1000}}%%  |  %%interfaces {<slot> | <slot/port1[-port2]>} speed {10 | 100 | 1000 | auto | max {100 | 1000}}%%  |
|  %%interfaces {<slot> | <slot/port[-port2]>} pause {tx-and-rx|tx|rx|disable}%%  |  %%no change%%  |
|  %%new command%%  |  %%interfaces {<slot> | <slot/port1[-port2]>]} flood-limit {bcast|mcast|uucast|all} rate { pps <num> | mbps <num> | cap% <num> | enable | disable} %%  |
|  %%interfaces {<slot> | <slot/port[-port2]>} max frame <size>%%  |  %%interfaces {<slot> | <slot/port1[-port2]>} max-frame-size <size>%%  |
|  %%interfaces {<slot> | <slot/port[-port2]>} no l2 statistics [cli]%%  |  %%clear interfaces {<slot> | <slot/port1[-port2]>} l2-statistics [cli]%%  |
|  %%interfaces {<slot> | <slot/port[-port2]>} port {<string> | <num>}%%  |  %%interfaces {<slot> | <slot/port1[-port2]>} alias {<string> | <num>}%%  |
|  %%interfaces transceiver ddm [trap] {enable | disable}%%  |  %%interfaces ddm[-trap] {enable | disable}%%  |
|  %%new command%%  |  %%interfaces {<slot> | <slot/port1[-port2]>} ingress-bandwidth {mbps <num> [burst <mbits>] | enable | disable}%%  |
|  %%show interfaces [<slot> | <slot/port[-port2]>] {status | capability | flood rate | port | accounting | counters | traffic | pause}%%  |  %%show interfaces [<slot> | <slot/port1[-port2]>] {status | capability | flood-rate | port | accounting | counters [errors] | traffic}%%  |
|  %%new command%%  |  %%show interfaces [<slot> | <slot/port1[-port2]>] ingress-rate-limit%%  |
|  %%show interfaces transceiver [<slot> | <slot/port[-port2]>] transceiver [ddm | w-low | w-high | a-low | a high | actual]%%  |  %%show interfaces [<slot> | <slot/port1[-port2]>] ddm [w-low | w-high | a-high | a-low | actual | status]%%  |
|  %%show interfaces [<slot> | <slot/port[-port]>] port%%  |  %%show interfaces [<slot> | <slot/port[-port]>] alias%%  |
|  %%interfaces slot[/port[-port2]] hybrid%%  |  %%removed: not supported at the moment%%  |
|  %%show interfaces [slot[/port[-port2]]] hybrid%%  |  %%removed: not supported at the moment%%  |
|  %%interfaces {<slot> | <slot/port[-port2]>} {ifg <num> | flow {enable | disable} | clear-violation-all | runt <num> | runtsize <num> | register {lwm | dyncell} regval <num> | pause}%%  |  %%removed%%  |
|  %%intefaces [no] e2e-flow-vlan%%  |  %%removed%%  |
|  %%interfaces cli-prompt {enable | disable}%%  |  %%removed%%  |
|  %%10gig slot <slot> {phys-a | phys-b}%%  |  %%removed%%  |
|  %%show interfaces [<slot> | <slot/port[-port2]>] {e2e-flow-vlan | flow | collisions | ifg | register {lwm | dyncell}}%%  |  %%removed%%  |
|  %%show 10gig [slot <slot>]%%  |  %%removed%%  |
|  %%debug interfaces [<slot> | <slot/port[port2]>] {backpressure [enable | disable] | automix {enable | disable} | mac [nonport | port | stats] | phy | led | mdix}%%  |  %%removed%%  |
|  %%debug interfaces set <slot/port> {mdix | automdix | linkled [activity]} {enable | disable}%%  |  %%removed%%  |
|  %%debug interfaces <slot> switching <hexNum> [<num>]%%  |  %%removed%%  |
|  %%debug interfaces [slot] backpressure%%  |  %%removed%%  |
|  %%debug interfaces set [slot] backpressure {enable | disable}%%  |  %%removed%%  |
===== GVRP =====
^  6.4.2.R01 Command  ^  7.1.1.R01 Command  ^
|  %%642Commands%%  |  %%711Commands%%  |
|  %%%%  |  %%Not Supported ATM%%  |
|  %%clear gvrp statistics [port <slot/port> | linkagg <agg>]%%  |  %%no change%%  |
|  %%[no] gvrp transparent-switching%%  |  %%no change%%  |
|  %%gvrp registration {normal | fixed | forbidden} {port <slot/port> | linkagg <agg>}%%  |  %%no change%%  |
|  %%no gvrp registration {port <slot/port> | linkagg <agg>}%%  |  %%no change%%  |
|  %%gvrp applicant {participant | non-participant | active} {port <slot/port> | linkagg <agg>}%%  |  %%no change%%  |
|  %%no gvrp applicant {port <slot/port> | linkagg <agg>}%%  |  %%no change%%  |
|  %%[no] gvrp restrict-vlan-registration {port <slot/port> | linkagg <agg>} <vlan[-vlan]>%%  |  %%no change%%  |
|  %%[no] gvrp static vlan-restrict {port <slot/port> | linkagg <agg>} <vlan[-vlan]>%%  |  %%[no] gvrp static-vlan-restrict {port <slot/port> | linkagg <agg>} <vlan[-vlan]>%%  |
|  %%gvrp timer {join | leave | leaveall} <time>  {port <slot/port> | linkagg <agg>}%%  |  %%no change%%  |
|  %%no gvrp timer {join | leave | leaveall} {port <slot/port> | linkagg <agg>}%%  |  %%no change%%  |
|  %%show gvrp timer [join | leave | leaveall] [port <slot/port> | linkagg <agg>]%%  |  %%no change%%  |
|  %%show gvrp statistics [port <slot/port> | linkagg <agg>]%%  |  %%no change%%  |
|  %%[no] gvrp%%  |  %%no change%%  |
|  %%[no] gvrp {port <slot/port> | linkagg <agg>}%%  |  %%no change%%  |
|  %%show gvrp last-pdu-origin {port <slot/port> | linkagg <agg>}%%  |  %%no change%%  |
|  %%show gvrp configuration [port [<slot/port>] | linkagg <agg>]%%  |  %%no change%%  |
|  %%gvrp maximum vlan <limit>%%  |  %%gvrp maximum-vlan <limit>%%  |
|  %%[no] gvrp restrict-vlan-advertisement {port <slot/port> | linkagg <agg>} <vlan[-vlan]>%%  |  %%no change%%  |
===== HEALTH MONITOR =====
^  6.4.2.R01 Command  ^  7.1.1.R01 Command  ^
|  %%health threshold {rx percent | txrx percent | memory percent | cpu percent}%%  |  %%no change%%  |
|  %%health threshold temperature degrees%%  |  %%removed%%  |
|  %%health interval seconds%%  |  %%no change%%  |
|  %%health statistics reset%%  |  %%removed%%  |
|  %%show health threshold [rx | txrx | memory | cpu | temperature]%%  |  %%show health configuration%%  |
|  %%show health interval%%  |  %%show health configuration%%  |
|  %%show health [statistics]%%  |  %%show health%%  |
|  %%show health {slot/port} [statistics]%%  |  %%show health {port <slot/port> | slot <slot>} [statistics]%%  |
|  %%show health all {memory | cpu | rx | txrx}%%  |  %%no change%%  |
|  %%show health slice slot%%  |  %%removed%%  |
|  %%show health fabric slot1[-slot2]%%  |  %%removed%%  |
===== HTTP =====
^  6.4.2.R01 Command  ^  7.1.1.R01 Command  ^
|  %%[no] { http | https } server%%  |  %%webview server { enable | disable }%%  |
|  %%new command%%  |  %%webview access { enable | disable }%%  |
|  %%[no] { http | https } ssl%%  |  %%webview force-ssl { enable | disable }%%  |
|  %%{ http | https } port { default | <port> }%%  |  %%webview http-port { default | <port> }%%  |
|  %%new command%%  |  %%webview https-port { default | <port> }%%  |
|  %%show http%%  |  %%show webview%%  |
|  %%debug http%%  |  %%removed%%  |
===== IPSEC =====
^  6.4.2.R01 Command  ^  7.1.1.R01 Command  ^
|  %%ipsec key key_name {sa-authentication | sa-encryption} key%%  |  %%no change%%  |
|  %%ipsec security-key [old_key] new_key%%  |  %%no change%%  |
|  %%ipsec policy policy_name [priority priority] [source {ipv6_address [/prefix_length]} [port port]] [destination {ipv6_address [/prefix_length]}[port port]] [protocol protocol}] [in | out] [discard | ipsec | none] [description description] [no shutdown | shutdown]%%  |  %%ipsec policy policy_name [priority priority] [source {ipv6_address [/prefix_length]} [port port]] [destination {ipv6_address [/prefix_length]}[port port]] [protocol protocol}] [in | out] [discard | ipsec | none] [description description] [admin-state {enable | disable}]%%  |
|  %%no ipsec policy policy_name%%  |  %%no change%%  |
|  %%ipsec policy policy_name rule index [ah | esp]%%  |  %%no change%%  |
|  %%no ipsec policy policy_name rule index%%  |  %%no change%%  |
|  %%ipsec sa sa_name {esp | ah} [source ipv6_address] [destination ipv6_address] [spi spi] [encryption {null | des-cbc | 3des-cbc | aes-cbc [key-size key_length] | aes-ctr [key-size key_length]}] [authentication {none | hmac-md5 | hmacsha1 | aes-xcbc-mac}] [description description] [no shutdown | shutdown]%%  |  %%ipsec sa sa_name {esp | ah} [source ipv6_address] [destination ipv6_address] [spi spi] [encryption {null | 3des-cbc | aes-cbc [key-size key_length]}] [authentication {none | hmac-md5 | hmacsha1 | aes-xcbc-mac}] [description description] [admin-state {enable | disable}]%%  |
|  %%no ipsec sa name%%  |  %%no change%%  |
|  %%show ipsec policy [policy_name]%%  |  %%no change%%  |
|  %%show ipsec sa [sa_name | esp | ah]%%  |  %%no change%%  |
|  %%show ipsec key {sa-encryption | sa-authentication}%%  |  %%no change%%  |
|  %%show ipsec ipv6 statistics%%  |  %%no change%%  |
===== IPV4 =====
^  6.4.2.R01 Command  ^  7.1.1.R01 Command  ^
|  %%VRF Prefix on all cmds [vrf {vrf_name}]%%  |  %%VRF Prefix on all cmds [vrf {vrf_name}]%%  |
|  %%ip interface name [address ip_address] [mask subnet_mask] [vlan vid] [forward | no forward] [local-proxy-arp | no local-proxy-arp] [e2 | snap] [primary | no primary]%%  |  %%no change%%  |
|  %%new command variation for  virtual chassis%%  |  %%ip interface name [address ip_address] [mask subnet_mask] [vlan <virtual-chassis-vlan-id>] vip-address <ip_address> %%  |
|  %%ip interface name admin {enable | disable}%%  |  %%ip interface <name> admin-state {<enable> | <disable>}%%  |
|  %%no ip interface name%%  |  %%no change%%  |
|  %%ip interface name tunnel [source ip_address] [destination ip_address] [protocol {ipip | gre}]%%  |  %%no change%%  |
|  %%ip router primary-address ip_address%%  |  %%no change%%  |
|  %%ip router router-id ip_address%%  |  %%no change%%  |
|  %%ip static-route ip_address [mask mask] gateway gateway [metric metric]%%  |  %%ip static-route ip_address [mask mask] {gateway gateway | follows ip_address} [metric metric] %%  |
|  %%no ip static-route ip_address [mask mask] gateway ip_address [metric metric]%%  |  %%no ip static-route ip_address [mask mask] {gateway ip_address | follows ip_address} [metric metric]%%  |
|  %%ip static-route ip_address [mask mask] gateway gateway bfd-std {enable | disable}%%  |  %%ip static-route ip_address [mask mask] gateway gateway bfd-state {enable | disable}%%  |
|  %%ip static-route all bfd-std {enable | disable}%%  |  %%ip static-route all bfd-state {enable | disable}%%  |
|  %%ip route-pref {static | ospf | rip | ebgp | ibgp} value%%  |  %%no change%%  |
|  %%ip default-ttl hops%%  |  %%no change%%  |
|  %%ping {ip_address | hostname} [count count] [size packet_size] [interval seconds] [timeout seconds]%%  |  %%no change%%  |
|  %%traceroute {ip_address | hostname} [max-hop max_hop_count]%%  |  %%no change%%  |
|  %%ip directed-broadcast {on | off}%%  |  %%no change%%  |
|  %%ip service {all | service_name | port service_port}%%  |  %%no change%%  |
|  %%no ip service {all | service_name | port service_port}%%  |  %%vlan types removed from service_name and service port%%  |
|  %%new command%%  |  %%ip service {ftp | ssh | telnet} port {default | <port>}%%  |
|  %%new command%%  |  %%[no] ip service access [<ip_interface_name>]%%  |
|  %%ip redist {local | static | rip | ospf | isis | bgp} into {rip | ospf | isis | bgp} route-map route-mapname [status {enable | disable}]%%  |  %%no change%%  |
|  %%no ip redist {local | static | rip | ospf | isis | bgp} into {rip | ospf | bgp} [route-map route-mapname]%%  |  %%no change%%  |
|  %%ip access-list access-list-name%%  |  %%no change%%  |
|  %%no ip access-list access-list-name%%  |  %%no change%%  |
|  %%ip access-list access-list-name address address/prefixLen [action {permit | deny}] [redist-control {all-subnets | no-subnets | aggregate}]%%  |  %%no change%%  |
|  %%no ip access-list access-list-name address address/prefixLen%%  |  %%no change%%  |
|  %%ip route-map route-map-name [sequence-number number] match ip-nexthop {access-list-name | ip_address/prefixLen [permit | deny]}%%  |  %%no change%%  |
|  %%no ip route-map route-map-name [sequence-number number] match ip-nexthop {access-list-name | ip_address/prefixLen [permit | deny]}%%  |  %%no change%%  |
|  %%ip route-map route-map-name [sequence-number number] match ipv6-nexthop {access-list-name | ipv6_address/prefixLen [permit | deny]}%%  |  %%no change%%  |
|  %%no ip route-map route-map-name [sequence-number number] match ipv6-nexthop {access-list-name | ipv6_address/prefixLen [permit | deny]}%%  |  %%no change%%  |
|  %%ip route-map route-map-name [sequence-number number] match ipv4-interface interfacename%%  |  %%no change%%  |
|  %%no ip route-map route-map-name [sequence-number number] match ipv4-interface interfacename%%  |  %%no change%%  |
|  %%ip route-map route-map-name [sequence-number number] match ipv6-interface interfacename%%  |  %%no change%%  |
|  %%no ip route-map route-map-name [sequence-number number] match ipv6-interface interfacename%%  |  %%no change%%  |
|  %%ip route-map route-map-name [sequence-number number] match metric metric [deviation deviation]%%  |  %%no change%%  |
|  %%no ip route-map route-map-name [sequence-number number] match metric metric [deviation deviation]%%  |  %%no change%%  |
|  %%ip route-map route-map-name [sequence-number number] match route-type {internal | external [type1 | type2] | level1 | level2}%%  |  %%no change%%  |
|  %%no ip route-map route-map-name [sequence-number number] match route-type {internal | external [type1 | type2] | level1 | level2}%%  |  %%no change%%  |
|  %%ip route-map route-map-name [sequence-number number] set metric metric [effect {add | subtract | replace | none}]%%  |  %%no change%%  |
|  %%no ip route-map route-map-name [sequence-number number] set metric metric [effect {add | subtract | replace | none}]%%  |  %%no change%%  |
|  %%ip route-map route-map-name [sequence-number number] set metric-type {internal | external [type1 | type2]}%%  |  %%no change%%  |
|  %%no ip route-map route-map-name [sequence-number number] set metric-type {internal | external [type1 | type2]}%%  |  %%no change%%  |
|  %%ip route-map route-map-name [sequence-number number] set tag tag-number%%  |  %%no change%%  |
|  %%no ip route-map route-map-name [sequence-number number] set tag tag-number%%  |  %%no change%%  |
|  %%ip route-map route-map-name [sequence-number number] set community community-string%%  |  %%no change%%  |
|  %%no ip route-map route-map-name [sequence-number number] set community communitystring%%  |  %%no change%%  |
|  %%ip route-map route-map-name [sequence-number number] set local-preference value%%  |  %%no change%%  |
|  %%no ip route-map route-map-name [sequence-number number] set local-preference value%%  |  %%no change%%  |
|  %%ip route-map route-map-name [sequence-number number] set level {level1 | level2 | level1-2}%%  |  %%no change%%  |
|  %%no ip route-map route-map-name [sequence-number number] set level {level1 | level2 | level1-2}%%  |  %%no change%%  |
|  %%ip route-map route-map-name [sequence-number number] set ip-nexthop ip_address%%  |  %%no change%%  |
|  %%no ip route-map route-map-name [sequence-number number] set ip-nexthop ip_address%%  |  %%no change%%  |
|  %%ip route-map route-map-name [sequence-number number] set ipv6-nexthop ipv6_address%%  |  %%no change%%  |
|  %%no ip route-map route-map-name [sequence-number number] set ipv6-nexthop ipv6_address%%  |  %%no change%%  |
|  %%vrf [name | default]%%  |  %%no change%%  |
|  %%no vrf name%%  |  %%no change%%  |
|  %%arp ip_address hardware_address [alias] [arp-name] [<slot/port>]%%  |  %%arp <ip_address> <hardware_address> [alias] [<arp-name>] [port <slot/port>] [linkagg <agg_num>]%%  |
|  %%no arp ip_address [alias]%%  |  %%no change%%  |
|  %%clear arp-cache%%  |  %%no change%%  |
|  %%ip dos arp-poison restricted-address ip_address%%  |  %%no change%%  |
|  %%no ip dos arp-poison restricted-address ip_address%%  |  %%no change%%  |
|  %%arp filter ip_address [mask ip_mask] [vid] [sender | target] [allow | block]%%  |  %%no change%%  |
|  %%no arp filter ip_address%%  |  %%no change%%  |
|  %%clear arp filter%%  |  %%no change%%  |
|  %%icmp type type code code {{enable | disable} | min-pkt-gap gap}%%  |  %%no change%%  |
|  %%icmp unreachable [net-unreachable | host-unreachable | protocol-unreachable | port-unreachable] {{enable | disable} | min-pkt-gap gap}%%  |  %%no change%%  |
|  %%icmp echo [request | reply] {{enable | disable} | min-pkt-gap gap}%%  |  %%no change%%  |
|  %%icmp timestamp [request | reply] {{enable | disable} | min-pkt-gap gap}%%  |  %%no change%%  |
|  %%icmp addr-mask [request | reply] {{enable | disable} | min-pkt-gap gap}%%  |  %%no change%%  |
|  %%icmp messages {enable | disable}%%  |  %%no change%%  |
|  %%ip dos scan close-port-penalty penalty_value%%  |  %%no change%%  |
|  %%ip dos scan tcp open-port-penalty penalty_value%%  |  %%no change%%  |
|  %%ip dos scan udp open-port-penalty penalty_value%%  |  %%no change%%  |
|  %%ip dos scan threshold threshold_value%%  |  %%no change%%  |
|  %%ip dos trap {enable | disable}%%  |  %%no change%%  |
|  %%ip dos scan decay decay_value%%  |  %%no change%%  |
|  %%show ip traffic%%  |  %%no change%%  |
|  %%show ip interface [name | emp | vlan vlan id]%%  |  %%no change%%  |
|  %%show ip route [summary]%%  |  %%show ip routes [summary]%%  |
|  %%show ip route-pref%%  |  %%no change%%  |
|  %%show ip redist [rip | ospf | bgp]%%  |  %%no change%%  |
|  %%show ip access-list [access-list-name]%%  |  %%no change%%  |
|  %%show ip route-map [route-map-name]%%  |  %%no change%%  |
|  %%show ip router database [protocol type | gateway ip_address | dest {ip_address/prefixLen | ip_address}]%%  |  %%no change%%  |
|  %%show ip emp-route%%  |  %%show ip emp-routes%%  |
|  %%show ip config%%  |  %%no change%%  |
|  %%show ip protocols%%  |  %%no change%%  |
|  %%new command%%  |  %%show ip router-id%%  |
|  %%show ip service%%  |  %%no change%%  |
|  %%show vrf%%  |  %%no change%%  |
|  %%show arp [ip_address | hardware_address]%%  |  %%no change%%  |
|  %%show arp summary%%  |  %%no change%%  |
|  %%show arp filter [ip_address]%%  |  %%no change%%  |
|  %%show icmp control%%  |  %%no change%%  |
|  %%show icmp [statistics]%%  |  %%no change%%  |
|  %%show tcp statistics%%  |  %%no change%%  |
|  %%show tcp ports%%  |  %%no change%%  |
|  %%show udp statistics%%  |  %%no change%%  |
|  %%show udp ports%%  |  %%no change%%  |
|  %%show ip dos config%%  |  %%no change%%  |
|  %%show ip dos statistics%%  |  %%no change%%  |
|  %%show ip dos arp-poison%%  |  %%no change%%  |
===== IPV6 =====
^  6.4.2.R01 Command  ^  7.1.1.R01 Command  ^
|  %%ipv6 interface if_name [vlan vid | tunnel {tid | 6to4}] [base-reachable-time time] [ra-send {yes | no}] [ra-max-interval interval] [ra-managed-config-flag {true | false}] [ra-other-config-flag {true | false}] [ra-reachable-time time] [ra-retrans-timer time] [ra-default-lifetime time | no ra-default-lifetime] [ra-send-mtu] {yes | no}%%  |  %%new options [no ra-min-interval] [ra-cli-skew]%%  |
|  %%ipv6 interface if_name {enable | disable}%%  |  %%ipv6 interface <if_name> admin-state {enable | disable}%%  |
|  %%no ipv6 interface if_name%%  |  %%no change%%  |
|  %%ipv6 address ipv6_address /prefix_length [anycast] {if_name | loopback}%%  |  %%no change%%  |
|  %%no ipv6 address ipv6_address [anycast] {if_name | loopback}%%  |  %%no change%%  |
|  %%ipv6 address ipv6_prefix eui-64 {if_name | loopback}%%  |  %%no change%%  |
|  %%no ipv6 address ipv6_prefix eui-64 {if_name | loopback}%%  |  %%no change%%  |
|  %%ipv6 address global-id {generate | globalID}%%  |  %%no change%%  |
|  %%ipv6 address local-unicast [global-id globalID] [subnet-id subnetID] {interface-id interfaceID | eui-64} [prefix-length prefixLength] {if-name | loopback}%%  |  %%no change%%  |
|  %%[no] ipv6 address local-unicast [global-id globalID] [subnet-id subnetID] {interface-id interfaceID | eui-64} [prefix-length prefixLength] {if-name | loopback}%%  |  %%no change%%  |
|  %%ipv6 interface if_name tunnel {[source ipv4_source] [destination ipv4_destination]}%%  |  %%no change%%  |
|  %%ipv6 dad-check ipv6_address if_name%%  |  %%no change%%  |
|  %%ipv6 hop-limit value%%  |  %%no change%%  |
|  %%no ipv6 hop-limit%%  |  %%no change%%  |
|  %%ipv6 pmtu-lifetime time%%  |  %%no change%%  |
|  %%ipv6 host name ipv6_address%%  |  %%removed%%  |
|  %%no ipv6 host name ipv6_address%%  |  %%no change%%  |
|  %%ipv6 neighbor stale-lifetime stale-lifetime%%  |  %%no change%%  |
|  %%ipv6 neighbor ipv6_address hardware_address {if_name} slot/port%%  |  %%ipv6 neighbor <ipv6_address> <hardware_address> <if_name> {port <slot/port> | linkagg <agg_id>}%%  |
|  %%no ipv6 neighbor ipv6_address {if_name}%%  |  %%no change%%  |
|  %%ipv6 prefix ipv6_address /prefix_length if_name [valid-lifetime time] [preferred-lifetime time] [on-link-flag {true | false} [autonomous-flag {true | false}] if_name%%  |  %%no change%%  |
|  %%no ipv6 prefix ipv6_address /prefix_length if_name%%  |  %%no change%%  |
|  %%ipv6 route ipv6_prefix/prefix_length ipv6_address [if_name]%%  |  %%no change%%  |
|  %%no ipv6 route ipv6_prefix/prefix_length ipv6_address [if_name]%%  |  %%no change%%  |
|  %%ipv6 static-route ipv6_prefix/prefix_length gateway ipv6_address [if_name] [metric metric]%%  |  %%no change%%  |
|  %%no ipv6 static-route ipv6_prefix/prefix_length gateway ipv6_address [if_name]%%  |  %%no change%%  |
|  %%ipv6 route-pref {static | ospf | rip | ebgp | ibgp} value%%  |  %%no change%%  |
|  %%ping6 {ipv6_address | hostname} [if_name] [count count] [size data_size] [interval seconds]%%  |  %%no change%%  |
|  %%traceroute6 {ipv6_address | hostname} [if_name] [max-hop hop_count] [wait-time time] [port port_number] [probe-count probe]%%  |  %%new options [size size_value] [host-names {yes|no}]%%  |
|  %%show ipv6 hosts [substring]%%  |  %%removed%%  |
|  %%show ipv6 icmp statistics [if_name]%%  |  %%no change%%  |
|  %%show ipv6 interface [if_name | loopback]%%  |  %%no change%%  |
|  %%show ipv6 pmtu table%%  |  %%no change%%  |
|  %%clear ipv6 pmtu table%%  |  %%removed%%  |
|  %%show ipv6 neighbors [ipv6_prefix/prefix_length | if_name | hw hardware_address | static]%%  |  %%no change%%  |
|  %%clear ipv6 neighbors%%  |  %%no change%%  |
|  %%show ipv6 prefixes%%  |  %%no change%%  |
|  %%show ipv6 routes [ipv6_prefix/prefix_length | static]%%  |  %%no change%%  |
|  %%show ipv6 route-pref%%  |  %%no change%%  |
|  %%show iv6p router database [protocol type | gateway ipv6_address | dest ipv6_prefix/prefix_length]%%  |  %%no change%%  |
|  %%show ipv6 tcp ports%%  |  %%removed%%  |
|  %%new command%%  |  %%show ipv6 tcp connections%%  |
|  %%new command%%  |  %%show ipv6 tcp listeners%%  |
|  %%clear ipv6 traffic%%  |  %%removed%%  |
|  %%show ipv6 tunnel%%  |  %%no change%%  |
|  %%show ipv6 udp ports%%  |  %%no change%%  |
|  %%show ipv6 information%%  |  %%no change%%  |
|  %%ipv6 redist {local | static | rip | ospf | isis | bgp} into {rip | ospf | isis | bgp} route-map routemap-name [status {enable | disable}]%%  |  %%ipv6 redist {local | static | rip | ospf | isis | bgp} into {rip | ospf | isis | bgp} route-map <routemap-name> [admin-state {enable | disable}]%%  |
|  %%ipv6 access-list access-list-name%%  |  %%no change%%  |
|  %%no ipv6 access-list access-list-name%%  |  %%no change%%  |
|  %%ipv6 access-list access-list-name address address/prefixLen [action {permit | deny}] [redist-control {all-subnets | no-subnets | aggregate}]%%  |  %%no change%%  |
|  %%no ipv6 access-list access-list-name address address/prefixLen%%  |  %%no change%%  |
|  %%show ipv6 redist [rip | ospf | bgp]%%  |  %%no change%%  |
|  %%show ip access-list [access-list-name]%%  |  %%no change%%  |
|  %%ipv6 load rip%%  |  %%no change%%  |
|  %%ipv6 rip status {enable | disable}%%  |  %%ipv6 rip admin-state {enable | disable}%%  |
|  %%ipv6 rip invalid-timer seconds%%  |  %%no change%%  |
|  %%ipv6 rip garbage-timer seconds%%  |  %%no change%%  |
|  %%ipv6 rip holddown-timer seconds%%  |  %%no change%%  |
|  %%ipv6 rip jitter value%%  |  %%no change%%  |
|  %%ipv6 rip route-tag value%%  |  %%no change%%  |
|  %%ipv6 rip update-interval seconds%%  |  %%no change%%  |
|  %%ipv6 rip triggered-sends {all | updated-only | none}%%  |  %%no change%%  |
|  %%ipv6 rip interface if_name%%  |  %%no change%%  |
|  %%[no] ipv6 rip interface if_name%%  |  %%no change%%  |
|  %%ipv6 rip interface if_name metric value%%  |  %%no change%%  |
|  %%ipv6 rip interface if_name recv-status {enable | disable}%%  |  %%no change%%  |
|  %%ipv6 rip interface if_name send-status {enable | disable}%%  |  %%no change%%  |
|  %%ipv6 rip interface if_name horizon {none | split-only | poison}%%  |  %%no change%%  |
|  %%show ipv6 rip%%  |  %%no change%%  |
|  %%show ipv6 rip interface [if_name]%%  |  %%no change%%  |
|  %%show ipv6 rip peer [ipv6_addresss]%%  |  %%no change%%  |
|  %%show ipv6 rip routes [dest <ipv6_prefix/prefix_length>] | [gateway <ipv6_addr>] | [detail <ipv6 prefix/prefix_length>]%%  |  %%no change%%  |
===== LINK AGGREGATION =====
^  6.4.2.R01 Command  ^  7.1.1.R01 Command  ^
|  %%static linkagg agg_num size size [name name] [admin state {enable | disable}]%%  |  %%linkagg static agg <agg_num1[-agg_num2]> size size [name name] [admin-state {enable | disable}] [multi-chassis active]%%  |
|  %%no static linkagg agg_num%%  |  %%no linkagg static agg <agg_num1[-agg_num2]>%%  |
|  %%static linkagg agg_num name name%%  |  %%linkagg static agg <agg_num1[-agg_num2]> name name%%  |
|  %%static linkagg agg_num no name%%  |  %%no linkagg static agg <agg_num1[-agg_num2]> name%%  |
|  %%static linkagg agg_num admin state {enable | disable}%%  |  %%linkagg static agg <agg_num1[-agg_num2]> admin-state {enable | disable}%%  |
|  %%static agg slot/port agg num agg_num%%  |  %%linkagg static port <slot/port1[-port2]> agg agg_num%%  |
|  %%static agg no slot/port%%  |  %%no linkagg static port <slot/port1[-port2]>%%  |
|  %%lacp linkagg agg_num size size%%  |  %%linkagg lacp agg <agg_num1[-agg_num2]> size size%%  |
|  %%no lacp linkagg agg_num%%  |  %%no linkagg lacp agg <agg_num1[-agg_num2]>%%  |
|  %%lacp linkagg agg_num name name%%  |  %%linkagg lacp agg <agg_num1[-agg_num2]> name name%%  |
|  %%lacp linkagg agg_num no name%%  |  %%no linkagg lacp agg <agg_num1[-agg_num2]> name%%  |
|  %%lacp linkagg agg_num admin state {enable | disable}%%  |  %%linkagg lacp agg <agg_num1[-agg_num2]> admin-state {enable | disable}%%  |
|  %%lacp linkagg agg_num actor admin key actor_admin_key%%  |  %%linkagg lacp agg <agg_num1[-agg_num2]> actor admin-key actor_admin_key%%  |
|  %%lacp linkagg agg_num no actor admin key%%  |  %%no linkagg lacp agg <agg_num1[-agg_num2]> actor admin-key%%  |
|  %%lacp linkagg agg_num actor system priority actor_system_priority%%  |  %%linkagg lacp agg <agg_num1[-agg_num2]> actor system-priority actor_system_priority%%  |
|  %%lacp linkagg agg_num no actor system priority%%  |  %%no linkagg lacp agg <agg_num1[-agg_num2]> actor system-priority%%  |
|  %%lacp linkagg agg_num actor system id actor_system_id%%  |  %%linkagg lacp agg <agg_num1[-agg_num2]> actor system-id actor_system_id%%  |
|  %%lacp linkagg agg_num no actor system id%%  |  %%no linkagg lacp agg <agg_num1[-agg_num2]> actor system-id%%  |
|  %%lacp linkagg agg_num partner system id partner_system_id%%  |  %%linkagg lacp agg <agg_num1[-agg_num2]> partner system-id partner_system_id%%  |
|  %%lacp linkagg agg_num no partner system id%%  |  %%no linkagg lacp agg <agg_num1[-agg_num2]> partner system-id%%  |
|  %%lacp linkagg agg_num partner system priority partner_system_priority%%  |  %%linkagg lacp agg <agg_num1[-agg_num2]> partner system-priority partner_system_priority%%  |
|  %%lacp linkagg agg_num no partner system priority%%  |  %%no linkagg lacp agg <agg_num1[-agg_num2]> partner system-priority%%  |
|  %%lacp linkagg agg_num partner admin key partner_admin_key%%  |  %%linkagg lacp agg <agg_num1[-agg_num2]> partner admin-key partner_admin_key%%  |
|  %%lacp linkagg agg_num no partner admin key%%  |  %%no linkagg lacp agg <agg_num1[-agg_num2]> partner admin-key%%  |
|  %%lacp agg slot/port actor admin key actor_admin_key%%  |  %%linkagg lacp port <slot/port1[-port2]> actor admin-key actor_admin_key%%  |
|  %%lacp agg no slot/port%%  |  %%no linkagg lacp port <slot/port1[-port2]>%%  |
|  %%lacp agg slot/port actor admin state {[active] [timeout] [aggregate] [synchronize] [collect] [distribute] [default] [expire] | none}%%  |  %%linkagg lacp port <slot/port1[-port2]> actor admin-state {[active] [timeout] [aggregate] [synchronize] [collect] [distribute] [default] [expire] | none}%%  |
|  %%lacp agg slot/port actor admin state {[[no] active] [[no] timeout] [[no] aggregate] [[no] synchronize] [[no] collect] [[no] distribute] [[no] default] [[no] expire] | none}%%  |  %%no linkagg lacp port <slot/port1[-port2]> actor admin-state {[active] [timeout] [aggregate] [synchronize] [collect] [distribute] [default] [expire] | none}%%  |
|  %%lacp agg slot/port actor system id actor_system_id%%  |  %%linkagg lacp port <slot/port1[-port2]> actor system-id actor_system_id%%  |
|  %%lacp agg slot/port no actor system id%%  |  %%no linkagg lacp port <slot/port1[-port2]> actor system-id%%  |
|  %%lacp agg slot/port actor system priority actor_system_priority%%  |  %%linkagg lacp port <slot/port1[-port2]> actor system-priority actor_system_priority%%  |
|  %%lacp agg slot/port no actor system priority%%  |  %%no linkagg lacp port <slot/port1[-port2]> actor system-priority%%  |
|  %%lacp agg slot/port partner admin state {[active] [timeout] [aggregate] [synchronize] [collect] [distribute] [default] [expire] | none}%%  |  %%linkagg lacp port <slot/port1[-port2]> partner admin-state {[active] [timeout] [aggregate] [synchronize] [collect] [distribute] [default] [expire] | none}%%  |
|  %%lacp agg slot/port partner admin state {[[no] active] [[no] timeout] [[no] aggregate] [[no] synchronize] [[no] collect] [[no] distribute] [[no] default] [[no] expire] | none}%%  |  %%no linkagg lacp port <slot/port1[-port2]> partner admin-state {[active] [timeout] [aggregate] [synchronize] [collect] [distribute] [default] [expire] | none}%%  |
|  %%lacp agg slot/port partner admin system id partner_admin_system_id%%  |  %%linkagg lacp port <slot/port1[-port2]> partner admin-system-id partner_admin_system_id%%  |
|  %%lacp agg slot/port no partner admin system id%%  |  %%no linkagg lacp port <slot/port1[-port2]> partner admin-system-id%%  |
|  %%lacp agg slot/port partner admin key partner_admin_key%%  |  %%linkagg lacp port <slot/port1[-port2]> partner admin-key partner_admin_key%%  |
|  %%lacp agg slot/port no partner admin key%%  |  %%no linkagg lacp port <slot/port1[-port2]> partner admin-key%%  |
|  %%lacp agg slot/port partner admin system priority partner_admin_system_priority%%  |  %%linkagg lacp port <slot/port1[-port2]> partner admin-system-priority partner_admin_system_priority%%  |
|  %%lacp agg slot/port no partner admin system priority%%  |  %%no linkagg lacp port <slot/port1[-port2]> partner admin-system-priority%%  |
|  %%lacp agg slot/port actor port priority actor_port_priority%%  |  %%linkagg lacp port <slot/port1[-port2]> actor port-priority actor_port_priority%%  |
|  %%lacp agg slot/port no actor port priority%%  |  %%no linkagg lacp port <slot/port1[-port2]> actor port-priority%%  |
|  %%lacp agg slot/port partner admin port partner_admin_port%%  |  %%linkagg lacp port <slot/port1[-port2]> partner admin-port partner_admin_port%%  |
|  %%lacp agg slot/port no partner admin port%%  |  %%no linkagg lacp port <slot/port1[-port2]> partner admin-port%%  |
|  %%lacp agg slot/port partner admin port priority partner_admin_port_priority%%  |  %%linkagg lacp port <slot/port1[-port2]> partner admin-port-priority partner_admin_port_priority%%  |
|  %%lacp agg slot/port no partner admin port priority%%  |  %%no linkagg lacp port <slot/port1[-port2]> partner admin-port-priority%%  |
|  %%show linkagg [<agg_num]%%  |  %%show linkagg agg [<agg_num1[-agg_num2]>]%%  |
|  %%show linkagg [agg_num] port [slot/port]%%  |  %%show linkagg agg [<agg_num1[-agg_num2]>] port [slot/port]%%  |
===== LLDP =====
^  6.4.2.R01 Command  ^  7.1.1.R01 Command  ^
|  %%lldp transmit interval seconds%%  |  %%no change%%  |
|  %%lldp transmit hold-multiplier num%%  |  %%no change%%  |
|  %%lldp transmit delay seconds%%  |  %%no change%%  |
|  %%lldp reinit delay seconds%%  |  %%no change%%  |
|  %%lldp notification interval seconds%%  |  %%no change%%  |
|  %%lldp {slot/port | slot | chassis} lldpdu {tx | rx | tx-and-rx | disable}%%  |  %%lldp {port <slot/port[-port]> | slot <slot> | chassis} lldpdu {tx | rx | tx-and-rx | disable}%%  |
|  %%lldp {slot/port | slot | chassis} notification {enable | disable}%%  |  %%lldp {port <slot/port[-port]> | slot <slot> | chassis} notification {enable | disable}%%  |
|  %%lldp {slot/port | slot | chassis} tlv management {port-description | system-name | systemdescription | system-capabilities | management-address} {enable | disable}%%  |  %%lldp {port <slot/port[-port]> | slot <slot> | chassis} tlv management {port-description | system-name | systemdescription | system-capabilities | management-address} {enable | disable}%%  |
|  %%lldp {slot/port | slot | chassis} tlv dot1 {port-vlan | vlan-name} {enable | disable}%%  |  %%lldp {port <slot/port[-port]> | slot <slot> | chassis} tlv dot1 {port-vlan | vlan-name} {enable | disable}%%  |
|  %%lldp {slot/port | slot | chassis} tlv dot3 mac-phy {enable | disable}%%  |  %%lldp {port <slot/port[-port]> | slot <slot> | chassis} tlv dot3 mac-phy {enable | disable}%%  |
|  %%lldp {slot/port | slot | chassis} tlv med {power | capability} {enable | disable}%%  |  %%lldp {port <slot/port[-port]> | slot <slot> | chassis} tlv med {power | capability} {enable | disable}%%  |
|  %%show lldp system-statistics%%  |  %%no change%%  |
|  %%show lldp [slot/port] statistics%%  |  %%show lldp [port <slot/port[-port]>] statistics%%  |
|  %%show lldp local-system%%  |  %%no change%%  |
|  %%show lldp [slot/port | slot] local-port%%  |  %%show lldp [port <slot/port[-port]> | slot <slot>] local-port%%  |
|  %%show lldp local-management-address%%  |  %%no change%%  |
|  %%show lldp [slot/port | slot] remote-system%%  |  %%show lldp [port <slot/port[-port]> | slot <slot>] remote-system%%  |
|  %%show lldp [slot/port | slot] remote-system [med {network-policy | inventory}]%%  |  %%show lldp [port <slot/port[-port]> | slot <slot>] remote-system [med {network-policy | inventory}]%%  |
|  %%show lldp [<slot | slot/port>] config%%  |  %%show lldp [port <slot/port[-port]> | slot <slot>] config%%  |
|  %%show lldp [<slot | slot/port>] statistics%%  |  %%show lldp [port <slot/port[-port]> | slot <slot>] statistics%%  |
|  %%show lldp system-statistics  (remains same)%%  |  %%no change%%  |
|  %%show lldp local-management-address (remains same)%%  |  %%no change%%  |
===== MULTICAST-ROUTING =====
^  6.4.2.R01 Command  ^  7.1.1.R01 Command  ^
|  %%%%  |  %%VRF Prefix added to all IPv4(ip) cmds  [vrf {vrf_name}]%%  |
|  %%ip mroute-boundary if_name scoped_address mask%%  |  %%no change%%  |
|  %%no ip mroute-boundary if_name scoped_address mask%%  |  %%no change%%  |
|  %%ipv6 mroute-boundary if_name scope scope_value%%  |  %%no change%%  |
|  %%no ipv6 mroute-boundary if_name scope scope_value%%  |  %%no change%%  |
|  %%ip mroute interface if_ name ttl threshold%%  |  %%no change%%  |
|  %%show ip mroute-boundary%%  |  %%no change%%  |
|  %%show ipv6 mroute-boundary%%  |  %%no change%%  |
|  %%show ip mroute%%  |  %%no change%%  |
|  %%show ip mroute interface {interface_name}%%  |  %%no change%%  |
|  %%show ipv6 mroute interface {interface_name}%%  |  %%no change%%  |
|  %%show ip mroute-nexthop%%  |  %%no change%%  |
|  %%show ipv6 mroute%%  |  %%no change%%  |
|  %%show ipv6 mroute-nexthop%%  |  %%no change%%  |
===== MULTICAST =====
^  6.4.2.R01 Command  ^  7.1.1.R01 Command  ^
|  %%ip multicast [vlan <vlan>] status [enable | disable]%%  |  %%ip multicast [vlan <vlan>] admin-state [enable | disable]%%  |
|  %%ipv6 multicast [vlan <vlan>] status [enable | disable]%%  |  %%ipv6 multicast [vlan <vlan>] admin-state [enable | disable]%%  |
===== MVRP =====
^  6.4.2.R01 Command  ^  7.1.1.R01 Command  ^
|  %%mvrp {enable | disable}%%  |  %%no change%%  |
|  %%mvrp {port <slot/port> | linkagg <agg>} {enable | disable}%%  |  %%mvrp {port <slot/port[-port]> | linkagg <agg[-agg]>} {enable | disable}%%  |
|  %%mvrp transparent-switching {enable | disable}%%  |  %%no change%%  |
|  %%mvrp maximum vlan <max>%%  |  %%mvrp maximum-vlan <max>%%  |
|  %%mvrp {port <slot/port> | linkagg <agg>} registration {normal | fixed | forbidden}%%  |  %%mvrp {port <slot/port[-port]> | linkagg <agg[-agg]>} registration {normal | fixed | forbidden}%%  |
|  %%mvrp {port <slot/port> | linkagg <agg>} applicant {participant | non-participant | active}%%  |  %%mvrp {port <slot/port[-port]> | linkagg <agg[-agg]>} applicant {participant | non-participant | active}%%  |
|  %%mvrp {port <slot/port> | linkagg <agg>} timer {join | leave | leaveall | periodic-timer} <time>%%  |  %%mvrp {port <slot/port[-port]> | linkagg <agg[-agg]>} timer {join | leave | leaveall | periodic-timer} <time>%%  |
|  %%mvrp {port <slot/port> | linkagg <agg>} periodic-transmission {enable | disable}%%  |  %%mvrp {port <slot/port[-port]> | linkagg <agg[-agg]>} periodic-transmission {enable | disable}%%  |
|  %%[no] mvrp {port <slot/port> | linkagg <agg>} restrict-vlan-registration vlan <vlan-vlan>%%  |  %%[no] mvrp {port <slot/port[-port]> | linkagg <agg[-agg]>} restrict-vlan-registration vlan <vlan-vlan>%%  |
|  %%[no] mvrp {port <slot/port> | linkagg <agg>} restrict-vlan-advertisement vlan <vlan-vlan>%%  |  %%[no] mvrp {port <slot/port[-port]> | linkagg <agg[-agg]>} restrict-vlan-advertisement vlan <vlan-vlan>%%  |
|  %%[no] mvrp {port <slot/port> | linkagg <agg>} static-vlan-restrict vlan <vlan-vlan>%%  |  %%[no] mvrp {port <slot/port[-port]> | linkagg <agg[-agg]>} static-vlan-restrict vlan <vlan-vlan>%%  |
|  %%mvrp opt_{port <slot/port> | linkagg <agg>} clear-statistics%%  |  %%mvrp opt_{port <slot/port[-port]> | linkagg <agg[-agg]>} clear-statistics%%  |
|  %%show mvrp [port <slot/port> | linkagg <agg>] configuration%%  |  %%show mvrp [port <slot/port[-port]> | linkagg <agg[-agg]>] configuration%%  |
|  %%show mvrp {port [<slot/port>] | linkagg [<agg>]} [enable | disable]%%  |  %%show mvrp {port [<slot/port[-port]>] | linkagg [<agg[-agg]>]} [enable | disable]%%  |
|  %%show mvrp {port <slot/port> | linkagg <agg>} vlan-restrictions%%  |  %%show mvrp {port <slot/port[-port]> | linkagg <agg[-agg]>} vlan-restrictions%%  |
|  %%show mvrp [port <slot/port> | linkagg <agg>] timer [join | leave | leaveall | periodic-timer]%%  |  %%show mvrp [port <slot/port[-port]> | linkagg <agg[-agg]>] timer [join | leave | leaveall | periodic-timer]%%  |
|  %%show mvrp [port <slot/port> | linkagg <agg>] statistics%%  |  %%show mvrp [port <slot/port[-port]> | linkagg <agg[-agg]>] statistics%%  |
|  %%show mvrp {port <slot/port> | linkagg <agg>} last-pdu-origin%%  |  %%show mvrp {port <slot/port[-port]> | linkagg <agg[-agg]>} last-pdu-origin%%  |
===== NTP =====
^  6.4.2.R01 Command  ^  7.1.1.R01 Command  ^
|  %%ntp server {<ip_address> | <string>} [key <int> | version <int> | minpoll <int> | prefer]%%  |  %%no change%%  |
|  %%no ntp server {<ip_address> | <string>}%%  |  %%no change%%  |
|  %%show ntp client%%  |  %%no change%%  |
|  %%show ntp server status%%  |  %%no change%%  |
|  %%show ntp server client-list%%  |  %%no change%%  |
|  %%show ntp server disabled-interfaces%%  |  %%no change%%  |
|  %%show ntp server status <ip_address>%%  |  %%no change%%  |
|  %%show ntp client server-list%%  |  %%no change%%  |
|  %%ntp key <int> {trusted | untrusted}%%  |  %%no change%%  |
|  %%ntp key load%%  |  %%no change%%  |
|  %%show ntp keys%%  |  %%no change%%  |
|  %%ntp client {enable | disable}%%  |  %%no change%%  |
|  %%ntp broadcast-client {enable | disable}%%  |  %%no change%%  |
|  %%ntp broadcast-delay <int>%%  |  %%no change%%  |
|  %%ntp server synchronized%%  |  %%no change%%  |
|  %%ntp server unsynchronized%%  |  %%no change%%  |
|  %%ntp src-ip prefered {<ip_address> | no-loopback0 | default}%%  |  %%no change%%  |
|  %%no ntp src-ip prefered%%  |  %%no change%%  |
|  %%ntp broadcast {<ip_address> | <string>} [version <int> | minpoll <int>]%%  |  %%no change%%  |
|  %%no ntp broadcast {<ip_address> | <string>}%%  |  %%no change%%  |
|  %%ntp peer {<ip_address> | <string>} [key <int> | version <int> | minpoll <int>]%%  |  %%no change%%  |
|  %%no ntp peer {<ip_address> | <string>}%%  |  %%no change%%  |
|  %%ntp interface <ip_address> {enable | disable}%%  |  %%no change%%  |
|  %%ntp master <int>%%  |  %%no change%%  |
|  %%ntp max-associations <int>%%  |  %%no change%%  |
|  %%ntp authenticate {enable | disable}%%  |  %%no change%%  |
|  %%show ntp status%%  |  %%no change%%  |
|  %%show ntp peers%%  |  %%no change%%  |
|  %%ntp client prefered {<ip_address> | no-loopback0 | default}%%  |  %%no change%%  |
|  %%no ntp client prefered%%  |  %%no change%%  |
===== OSPF =====
^  6.4.2.R01 Command  ^  7.1.1.R01 Command  ^
|  %%Optional VRF Prefix on all cmds [vrf {vrf_name}]%%  |  %%Optional VRF Prefix on all cmds [vrf {vrf_name}]%%  |
|  %%ip ospf status {enable | disable}%%  |  %%ip ospf admin-state {enable | disable}%%  |
|  %%ip load ospf%%  |  %%no change%%  |
|  %%ip ospf exit-overflow-interval seconds%%  |  %%no change%%  |
|  %%ip ospf extlsdb-limit limit%%  |  %%no change%%  |
|  %%ip ospf host ip_address tos tos [metric metric]%%  |  %%no change%%  |
|  %%no ip ospf host ip_address tos tos%%  |  %%no change%%  |
|  %%ip ospf mtu-checking%%  |  %%no change%%  |
|  %%no ip ospf mtu-checking%%  |  %%no change%%  |
|  %%ip ospf default-originate {only | always} [metric-type {type1 | type2}] [metric value]%%  |  %%no change%%  |
|  %%no ip ospf default-originate%%  |  %%no change%%  |
|  %%ip ospf route-tag tag%%  |  %%no change%%  |
|  %%ip ospf spf-timer [delay delay_seconds] [hold hold_seconds]%%  |  %%no change%%  |
|  %%ip ospf virtual-link area_id router_id [auth-type {none | simple | md5}] [auth-key key_string] [dead-interval seconds] [hello-interval seconds] [retrans-interval seconds] [transit-delay seconds]%%  |  %%no change%%  |
|  %%no ip ospf virtual-link area_id router_id%%  |  %%no change%%  |
|  %%ip ospf neighbor neighbor_id {eligible | non-eligible}%%  |  %%no change%%  |
|  %%no ip ospf neighbor neighbor_id%%  |  %%no change%%  |
|  %%ip ospf area area_id [summary {enable | disable}] | [type {normal | stub | nssa}]%%  |  %%no change%%  |
|  %%no ip ospf area area_id%%  |  %%no change%%  |
|  %%ip ospf area area_id default-metric tos [[cost cost] | [type {ospf | type 1 | type 2}]%%  |  %%no change%%  |
|  %%no ip ospf area area_id default-metric tos%%  |  %%no change%%  |
|  %%ip ospf area area_id range {summary | nssa} ip_address subnet_mask [effect {admatching | noMatching}]%%  |  %%no change%%  |
|  %%no ip ospf area area_id range {summary | nssa} ip_address subnet_mask%%  |  %%no change%%  |
|  %%ip ospf interface {interface_name}%%  |  %%no change%%  |
|  %%no ip ospf interface {interface_name}%%  |  %%no change%%  |
|  %%ip ospf interface {interface_name} status {enable | disable}%%  |  %%ip ospf interface {<interface_name>} admin-state {enable | disable}%%  |
|  %%ip ospf interface {interface_name} area area_id%%  |  %%no change%%  |
|  %%ip ospf interface {interface_name} auth-key key_string%%  |  %%no change%%  |
|  %%ip ospf interface {interface_name} auth-type [none | simple | md5]%%  |  %%no change%%  |
|  %%ip ospf interface {interface_name} dead-interval seconds%%  |  %%no change%%  |
|  %%ip ospf interface {interface_name} hello-interval seconds%%  |  %%no change%%  |
|  %%ip ospf interface {interface_name} md5 key_id [enable | disable]%%  |  %%no change%%  |
|  %%ip ospf interface {interface_name} md5 key_id key key_string%%  |  %%no change%%  |
|  %%ip ospf interface {interface_name} type {point-to-point | point-to-multipoint | broadcast | nonbroadcast}%%  |  %%no change%%  |
|  %%ip ospf interface {interface_name} cost cost%%  |  %%no change%%  |
|  %%ip ospf interface {interface_name} poll-interval seconds%%  |  %%no change%%  |
|  %%ip ospf interface {interface_name} priority priority%%  |  %%no change%%  |
|  %%ip ospf interface {interface_name} retrans-interval seconds%%  |  %%no change%%  |
|  %%ip ospf interface {interface_name} transit-delay seconds%%  |  %%no change%%  |
|  %%ip ospf restart-support {planned-unplanned | planned-only}%%  |  %%no change%%  |
|  %%no ip ospf restart-support%%  |  %%no change%%  |
|  %%ip ospf restart-interval [seconds]%%  |  %%no change%%  |
|  %%ip ospf restart-helper [status {enable | disable}]%%  |  %%ip ospf restart-helper [admin-state {enable | disable}]%%  |
|  %%ip ospf restart-helper strict-lsa-checking status {enable | disable}%%  |  %%ip ospf restart-helper strict-lsa-checking admin-state {enable | disable}%%  |
|  %%ip ospf restart initiate%%  |  %%no change%%  |
|  %%show ip ospf%%  |  %%no change%%  |
|  %%show ip ospf border-routers [area_id] [router_id] [tos] [gateway]%%  |  %%no change%%  |
|  %%show ip ospf ext-lsdb [linkstate-id ls_id] [router-id router_id]%%  |  %%no change%%  |
|  %%show ip ospf host [ip_address]%%  |  %%no change%%  |
|  %%show ip ospf lsdb [area_id] [rtr | net | netsum | asbrsum] [linkstate-id ls_id] [router-id router_id]%%  |  %%no change%%  |
|  %%show ip ospf neighbor [ip_address]%%  |  %%no change%%  |
|  %%show ip ospf routes [ip_addr mask tos gateway]%%  |  %%no change%%  |
|  %%show ip ospf virtual-link [router_id]%%  |  %%no change%%  |
|  %%show ip ospf virtual-neighbor area_id router_id%%  |  %%no change%%  |
|  %%show ip ospf area [area_id]%%  |  %%no change%%  |
|  %%show ip ospf area area_id range [{summary | nssa} ip_address ip_mask]%%  |  %%no change%%  |
|  %%show ip ospf area area_id stub%%  |  %%no change%%  |
|  %%show ip ospf interface [interface_name]%%  |  %%no change%%  |
|  %%show ip ospf restart%%  |  %%no change%%  |
===== OSPFV3 =====
^  6.4.2.R01 Command  ^  7.1.1.R01 Command  ^
|  %%ipv6 ospf status {enable | disable}%%  |  %%ipv6 ospf admin-state {enable | disable}%%  |
|  %%ipv6 load ospf%%  |  %%no change%%  |
|  %%ipv6 ospf host ipv6_address [area area_id] [metric metric]%%  |  %%no change%%  |
|  %%no ipv6 ospf host ipv6_address area area_id%%  |  %%no change%%  |
|  %%ipv6 ospf mtu-checking%%  |  %%no change%%  |
|  %%no ipv6 ospf mtu-checking%%  |  %%no change%%  |
|  %%ipv6 ospf route-tag tag%%  |  %%no change%%  |
|  %%ipv6 ospf spf-timer [delay delay_seconds] [hold hold_seconds]%%  |  %%no change%%  |
|  %%ipv6 ospf virtual-link area area_id router router_id [dead-interval seconds] [hello-interval seconds] [retrans-interval seconds] [transit-delay seconds]%%  |  %%no change%%  |
|  %%no ipv6 ospf virtual-link area area_id router router_id%%  |  %%no change%%  |
|  %%ipv6 ospf area area_id [type {normal | stub [default-metric metric]}]%%  |  %%no change%%  |
|  %%no ipv6 ospf area area_id%%  |  %%no change%%  |
|  %%ipv6 ospf interface interface_name%%  |  %%no change%%  |
|  %%no ipv6 ospf interface interface_name%%  |  %%no change%%  |
|  %%ipv6 ospf interface interface_name status {enable | disable}%%  |  %%ipv6 ospf interface interface_name admin-state {enable | disable}%%  |
|  %%no ipv6 ospf interface interface_name%%  |  %%no change%%  |
|  %%ipv6 ospf interface interface_name area area_id%%  |  %%no change%%  |
|  %%ipv6 ospf interface interface_name dead-interval seconds%%  |  %%no change%%  |
|  %%ipv6 ospf interface interface_name hello-interval seconds%%  |  %%no change%%  |
|  %%ipv6 ospf interface interface_name cost cost%%  |  %%no change%%  |
|  %%ip ospf interface interface_name priority priority%%  |  %%no change%%  |
|  %%ipv6 ospf interface interface_name retrans-interval interval%%  |  %%no change%%  |
|  %%ipv6 ospf interface interface_name transit-delay delay%%  |  %%no change%%  |
|  %%show ipv6 ospf%%  |  %%no change%%  |
|  %%show ipv6 ospf border-routers [area area_id] [router router_id]%%  |  %%no change%%  |
|  %%show ipv6 ospf host [ipv6_address]%%  |  %%no change%%  |
|  %%show ipv6 ospf lsdb [area area_id] [rtr | net | netsum | asbrsum] [linkstate-id ls_id] [router-id router_id]%%  |  %%no change%%  |
|  %%show ipv6 ospf neighbor [router ipv4_address][interface interface_name]%%  |  %%no change%%  |
|  %%show ipv6 ospf routes [prefix ipv6_address_prefix][gateway gateway]%%  |  %%no change%%  |
|  %%show ipv6 ospf virtual-link [router_id]%%  |  %%no change%%  |
|  %%show ipv6 ospf area [area_id]%%  |  %%no change%%  |
|  %%show ipv6 ospf interface [interface_name]%%  |  %%no change%%  |
===== PIM =====
^  6.4.2.R01 Command  ^  7.1.1.R01 Command  ^
|  %%%%  |  %%Optional VRF Prefix added to all IPv4(ip) cmds [vrf {vrf_name}]%%  |
|  %%ip load pim%%  |  %%no change%%  |
|  %%ip pim sparse status {enable | disable}%%  |  %%ip pim sparse admin-state {enable | disable}%%  |
|  %%ip pim dense status {enable | disable}%%  |  %%ip pim dense admin-state {enable | disable}%%  |
|  %%ip pim static-rp group_address/prefix_length rp_address [[no] override] [priority priority]%%  |  %%no change%%  |
|  %%ip pim rp-threshold bps%%  |  %%no change%%  |
|  %%ip pim max-rps number%%  |  %%no change%%  |
|  %%ip pim probe-time seconds%%  |  %%no change%%  |
|  %%ip pim register checksum {header | full}%%  |  %%no change%%  |
|  %%ip pim register-suppress-timeout seconds%%  |  %%no change%%  |
|  %%ip pim spt status {enable | disable}%%  |  %%ip pim spt admin-state {enable | disable}%%  |
|  %%ip pim state-refresh-interval seconds%%  |  %%no change%%  |
|  %%ip pim state-refresh- limit ticks%%  |  %%no change%%  |
|  %%ip pim state-refresh- ttl num%%  |  %%no change%%  |
|  %%show ip pim sparse%%  |  %%no change%%  |
|  %%show ip pim dense%%  |  %%no change%%  |
|  %%show ip pim neighbor [ip_address]%%  |  %%no change%%  |
|  %%show ip pim candidate-rp%%  |  %%no change%%  |
|  %%show ip pim group-map [bsr | static-rp | ssm | dense]%%  |  %%no change%%  |
|  %%show ip pim interface [if_name]%%  |  %%no change%%  |
|  %%show ip pim static-rp%%  |  %%no change%%  |
|  %%ipv6 pim sparse status {enable | disable}%%  |  %%ipv6 pim sparse admin-state {enable | disable}%%  |
|  %%ipv6 pim dense status {enable | disable}%%  |  %%ipv6 pim dense admin-state {enable | disable}%%  |
|  %%ipv6 pim cbsr bsr_address [priority bsr_priority] [mask-length masklen] [scope scope_value]%%  |  %%no change%%  |
|  %%no ipv6 pim cbsr bsr_address [priority bsr_priority] [mask-length masklen] [scope scope_value]%%  |  %%no change%%  |
|  %%ipv6 pim static-rp group_address/prefix_length rp_address [[no] override] [priority priority]%%  |  %%no change%%  |
|  %%ipv6 pim spt status {enable | disable}%%  |  %%ipv6 pim spt admin-state {enable | disable}%%  |
|  %%show ipv6 pim neighbor [ipv6_address] [if_name]%%  |  %%no change%%  |
|  %%show ipv6 pim cbsr [scope scope_value]%%  |  %%no change%%  |
|  %%show ipv6 pim bsr [scope scope_value]%%  |  %%no change%%  |
|  %%ip pim interface%%  |  %%no change%%  |
|  %%ip pim cbsr%%  |  %%no change%%  |
|  %%ip pim dense group%%  |  %%no change%%  |
|  %%ip pim ssm group%%  |  %%no change%%  |
|  %%ip pim candidate-rp%%  |  %%no change%%  |
|  %%ip pim invalid-joinprune-notification-period%%  |  %%no change%%  |
|  %%ip pim invalid-register-notification-period%%  |  %%no change%%  |
|  %%ip pim neighbor-loss-notification-period%%  |  %%no change%%  |
|  %%ip pim invalid-rp-mapping-notification-period%%  |  %%no change%%  |
|  %%ip pim keepalive period%%  |  %%no change%%  |
|  %%ipv6 pim interface%%  |  %%no change%%  |
|  %%ipv6 pim candidate-rp%%  |  %%no change%%  |
|  %%ipv6 pim dense group%%  |  %%no change%%  |
|  %%ipv6 pim ssm group%%  |  %%no change%%  |
|  %%ipv6 pim rp-switchover%%  |  %%no change%%  |
|  %%show ip pim bsr%%  |  %%no change%%  |
|  %%show ip pim cbsr%%  |  %%no change%%  |
|  %%show ip pim dense group%%  |  %%no change%%  |
|  %%show ip pim ssm group%%  |  %%no change%%  |
|  %%show ip pim groute%%  |  %%no change%%  |
|  %%show ip pim sgroute%%  |  %%no change%%  |
|  %%show ip pim notifications%%  |  %%no change%%  |
|  %%show ipv6 pim sparse%%  |  %%no change%%  |
|  %%show ipv6 pim dense%%  |  %%no change%%  |
|  %%show ipv6 pim interface%%  |  %%no change%%  |
|  %%show ipv6 pim candidate-rp%%  |  %%no change%%  |
|  %%show ipv6 pim static-rp%%  |  %%no change%%  |
|  %%show ipv6 pim group-map%%  |  %%no change%%  |
|  %%show ipv6 pim dense group%%  |  %%no change%%  |
|  %%show ipv6 pim ssm group%%  |  %%no change%%  |
|  %%show ipv6 pim groute%%  |  %%no change%%  |
|  %%show ipv6 pim sgroute%%  |  %%no change%%  |
===== PMM =====
^  6.4.2.R01 Command  ^  7.1.1.R01 Command  ^
|  %%port mirroring port_mirror_sessionid [no] source slot/port[-port2] [slot/port[-port2]...] destination slot/port [rpmir-vlan vlan_id] [bidirectional |inport |outport] [unblocked vlan_id] [enable | disable]%%  |  %%port-mirroring <port_mirror_sessionid> [no] source {<slot/port[-port2] [slot/port[-port2]...]>} destination <slot/port> [rpmir-vlan <vlan_id>] [bidirectional | inport | outport] [unblocked-vlan <vlan_id>] [enable | disable]%%  |
|  %%port mirroring port_mirror_sessionid {enable | disable}%%  |  %%port-mirroring <port_mirror_sessionid> {enable | disable}%%  |
|  %%no port mirroring port_mirror_sessionid%%  |  %%no port-mirroring <port_mirror_sessionid> %%  |
|  %%port monitoring port_monitor_sessionid source slot/port [{no file | file filename [size filesize] | [overwrite {on | off}]}] [inport | outport | bidirectional] [timeout seconds] [enable | disable]%%  |  %%port-monitoring <port_monitor_sessionid> source <slot/port> [{no file | file <filename> [size <filesize>] | [overwrite {on | off}]}] [inport | outport | bidirectional] [timeout <seconds>] [enable | disable] [capture-type {full | brief}]%%  |
|  %%port monitoring port_monitor_sessionid {disable | pause | resume}%%  |  %%port-monitoring <port_monitor_sessionid> {disable | pause | resume}%%  |
|  %%no port monitoring port_monitor_sessionid%%  |  %%no port-monitoring <port_monitor_sessionid>%%  |
|  %%show port mirroring status [port_mirror_sessionid]%%  |  %%show port-mirroring status [<port_mirror_sessionid>]%%  |
|  %%show port monitoring status [port_monitor_sessionid]%%  |  %%show port-monitoring status [<port_monitor_sessionid>]%%  |
|  %%show port monitoring file [port_monitor_sessionid]%%  |  %%show port-monitoring file [<port_monitor_sessionid>]%%  |
===== POLICY-SERVER =====
^  6.4.2.R01 Command  ^  7.1.1.R01 Command  ^
|  %%policy server load%%  |  %%no change%%  |
|  %%policy server flush%%  |  %%no change%%  |
|  %%policy server ip_address [port port_number] [preference preference] [user user_name password password] [searchbase search_string] [ssl | no ssl]%%  |  %%no change%%  |
|  %%policy server ip_address admin {up | down}%%  |  %%policy server ip_address admin-state {enable | disable}%%  |
|  %%no policy server ip_address [port port_number]%%  |  %%no change%%  |
|  %%show policy server%%  |  %%no change%%  |
|  %%show policy server long%%  |  %%no change%%  |
|  %%show policy server statistics%%  |  %%no change%%  |
|  %%show policy server rules%%  |  %%no change%%  |
|  %%show policy server events%%  |  %%no change%%  |
===== PORT-MANAGER =====
^  6.4.2.R01 Command  ^  7.1.1.R01 Command  ^
|  %%new command%%  |  %%SHOW VIOLATION [port <slot/port[-port]> | linkagg <aggnum[-aggnum]>]%%  |
|  %%new command%%  |  %%CLEAR VIOLATION {port <slot/port[-port]> | linkagg <aggnum[-aggnum]>}%%  |
===== PORT-MAPPING =====
^  6.4.2.R01 Command  ^  7.1.1.R01 Command  ^
|  %%port mapping port_mapping_sessionid {enable | disable}%%  |  %%port-mapping <port_mapping_sessionid> {enable | disable}%%  |
|  %%no port mapping port_mapping_sessionid%%  |  %%no port-mapping <port_mapping_sessionid>%%  |
|  %%port mapping session id unknown-unicast-flooding {enable | disable}%%  |  %%port-mapping <sessionid> unknown-unicast-flooding {enable | disable}%%  |
|  %%show port mapping [port_mapping_sessionid]%%  |  %%show port-mapping [<port_mapping_sessionid>]%%  |
|  %%port mapping <id> {unknown-unicast-flooding {enable | disable} | unidirectional | bidirectional}%%  |  %%port-mapping <id> {unknown-unicast-flooding {enable | disable} | unidirectional | bidirectional}%%  |
|  %%port mapping <id> [user-port {<slot/port[-port]> | linkagg <agg_id> | slot <slot_id>] [network-port {<slot/port[-port]> | linkagg <agg_id> | slot <slot_id>]%%  |  %%port-mapping <id> [user-port {<slot/port[-port]> | linkagg <agg_id> | slot <slot_id>] [network-port {<slot/port[-port]> | linkagg <agg_id> | slot <slot_id>]%%  |
|  %%port mapping <id> [no user-port {<slot/port[-port]> | linkagg <agg_id> | slot <slot_id>] [no network-port {<slot/port[-port]> | linkagg <agg_id> | slot <slot_id>]%%  |  %%no port-mapping <id> [user-port {<slot/port[-port]> | linkagg <agg_id> | slot <slot_id>] [network-port {<slot/port[-port]> | linkagg <agg_id> | slot <slot_id>]%%  |
===== PORT-SECURITY =====
^  6.4.2.R01 Command  ^  7.1.1.R01 Command  ^
|  %%port-security {slot/port[-port2] | chassis} [enable | disable]%%  |  %%port-security {port <slot/port[-port2]> | chassis} [learning-enable | learning-disable]%%  |
|  %%no port security slot/port[-port2]%%  |  %%no port security {port <slot/port[-port2]>}%%  |
|  %%port-security shutdown minutes [convert-to-static {enable | disable}]%%  |  %%port-security learning-window <minutes> [convert-to-static {enable | disable}]%%  |
|  %%port-security shutdown 0%%  |  %%no port-security learning-window %%  |
|  %%port-security slot/port[-port2] maximum number%%  |  %%port-security port <slot/port[-port2]> maximum <number>%%  |
|  %%port-security slot/port[-port2] max-filtering number%%  |  %%port-security port <slot/port[-port2]> max-filtering <number>%%  |
|  %%port-security {slot/port[-port2] | chassis} convert-to-static%%  |  %%port-security {port <slot/port[-port2]> | chassis} convert-to-static%%  |
|  %%port-security slot/port mac mac_address [vlan vlan_id]%%  |  %%removed%%  |
|  %%port-security slot/port no mac {all | mac_address} [vlan vlan_id]%%  |  %%removed%%  |
|  %%port-security slot/port[-port2] mac-range [low mac_address | high mac_address | low mac_address high mac_address]%%  |  %%port-security port <slot/port[-port2]> mac-range [low mac_address | high mac_address | low mac_address high mac_address]%%  |
|  %%port-security slot/port[-port2] violation {restrict | shutdown}%%  |  %%port-security port <slot/port[-port2]> violation {restrict | shutdown}%%  |
|  %%port-security slot/port release%%  |  %%removed%%  |
|  %%port-security slot/port[-port2] learn-trap-threshold <number>%%  |  %%port-security port <slot/port[-port2]> learn-trap-threshold <number>%%  |
|  %%show port-security [slot/port[-port2] | slot]%%  |  %%show port-security [port <slot/port[-port2]> | slot <slot>]%%  |
|  %%show port-security shutdown%%  |  %%show port-security learning-window%%  |
===== QOS =====
^  6.4.2.R01 Command  ^  7.1.1.R01 Command  ^
|  %%qos {enable | disable}%%  |  %%no change%%  |
|  %%qos trust ports%%  |  %%qos trust-ports%%  |
|  %%qos no trust ports%%  |  %%qos no trust-ports%%  |
|  %%qos default servicing mode {strict-priority | wrr [w0 w1 w2 w3 w4 w5 w6 w7] | priority-wrr [w0 w1 w2 w3 w4 w5 w6 w7] | drr] [w0 w1 w2 w3 w4 w5 w6 w7]}%%  |  %%removed%%  |
|  %%qos forward log%%  |  %%no change%%  |
|  %%qos no forward log%%  |  %%no change%%  |
|  %%qos log console%%  |  %%no change%%  |
|  %%qos no log console%%  |  %%no change%%  |
|  %%qos log lines lines%%  |  %%no change%%  |
|  %%qos log level level%%  |  %%no change%%  |
|  %%qos clear log%%  |  %%clear qos log%%  |
|  %%qos [no] classifyl3 bridged%%  |  %%removed%%  |
|  %%qos [no] classify fragments%%  |  %%removed%%  |
|  %%qos default bridged disposition {accept | deny | drop}%%  |  %%removed%%  |
|  %%qos default routed disposition {accept | deny | drop}%%  |  %%removed%%  |
|  %%qos default multicast disposition {accept | deny | drop}%%  |  %%removed%%  |
|  %%qos stats interval seconds%%  |  %%no change%%  |
|  %%qos nms priority%%  |  %%removed%%  |
|  %%qos no nms priority%%  |  %%removed%%  |
|  %%qos phones [priority priority_value | trusted]%%  |  %%no change%%  |
|  %%qos no phones%%  |  %%no change%%  |
|  %%qos user-port {filter | shutdown} {spoof | bgp | bpdu | rip | ospf | vrrp | dvmrp | pim | isis | dhcpserver | dns-reply}%%  |  %%no change%%  |
|  %%qos no user-port {filter | shutdown}%%  |  %%no change%%  |
|  %%qos quarantine mac-group mac_group%%  |  %%no change%%  |
|  %%qos no quarantine mac-group%%  |  %%no change%%  |
|  %%qos quarantine path url%%  |  %%no change%%  |
|  %%qos no quarantine path%%  |  %%no change%%  |
|  %%qos quarantine page%%  |  %%no change%%  |
|  %%qos no quarantine page%%  |  %%no change%%  |
|  %%debug qos [info] [config] [rule] [main] [route] [port] [msg] [sl] [ioctl] [mem] [cam] [mapper] [flows] [queue] [slot] [l2] [l3] [classifier] [nat] [sem] [pm] [ingress] [egress]%%  |  %%no change%%  |
|  %%debug no qos [info] [config] [rule] [main] [route] [port] [msg] [sl] [ioctl] [mem] [cam] [mapper] [flows] [queue] [slot] [l2] [l3] [classifier] [nat] [sem] [pm] [ingress] [egress] %%  |  %%no change%%  |
|  %%debug qos internal <input_string>%%  |  %%no change%%  |
|  %%qos apply%%  |  %%no change%%  |
|  %%qos revert%%  |  %%no change%%  |
|  %%qos flush%%  |  %%no change%%  |
|  %%qos reset%%  |  %%no change%%  |
|  %%qos stats reset%%  |  %%no change%%  |
|  %%qos flow timeout%%  |  %%removed%%  |
|  %%qos fragment timeout%%  |  %%removed%%  |
|  %%qos port slot/port reset%%  |  %%qos port <slot/port[-port]> reset%%  |
|  %%qos port slot/port [enable | disable]%%  |  %%qos port <slot/port[-port]> [enable | disable]%%  |
|  %%qos port slot/port trusted%%  |  %%qos port <slot/port[-port]> trusted%%  |
|  %%qos port slot/port no trusted%%  |  %%qos port <slot/port[-port]> no trusted%%  |
|  %%qos port slot/port servicing mode {strict-priority | wrr [w0 w1 w2 w3 w4 w5 w6 w7] | prioritywrr [w0 w1 w2 w3 w4 w5 w6 w7] | drr [w0 w1 w2 w3 w4 w5 w6 w7] | default}%%  |  %%removed%%  |
|  %%qos port slot/port qn {minbw | maxbw} kbps%%  |  %%removed%%  |
|  %%qos port slot/port no qn {minbw | maxbw} kbps%%  |  %%removed%%  |
|  %%qos port slot/port maximum bandwidth bps%%  |  %%removed%%  |
|  %%qos port slot/port no maximum bandwidth%%  |  %%removed%%  |
|  %%qos port slot/port maximum egress-bandwidth bps%%  |  %%qos port <slot/port[-port]> maximum egress-bandwidth bps%%  |
|  %%qos port slot/port no maximum egress-bandwidth%%  |  %%qos port <slot/port[-port]> no maximum egress-bandwidth%%  |
|  %%qos port slot/port maximum ingress-bandwidth bps%%  |  %%qos port <slot/port[-port]> maximum ingress-bandwidth bps%%  |
|  %%qos port slot/port no maximum ingress-bandwidth%%  |  %%qos port <slot/port[-port]> no maximum ingress-bandwidth%%  |
|  %%qos port slot/port default 802.1p value%%  |  %%qos port <slot/port[-port]> default 802.1p value%%  |
|  %%qos port slot/port default dscp value%%  |  %%qos port <slot/port[-port]> default dscp value%%  |
|  %%qos port slot/port default classification {802.1p | dscp}%%  |  %%qos port <slot/port[-port]> default classification {802.1p | dscp}%%  |
|  %%qos port slot/port maximum [reserve | signal] bandwidth bps%%  |  %%removed%%  |
|  %%qos port slot/port no maximum [reserve | signal] bandwidth%%  |  %%removed%%  |
|  %%qos port slot/port maximum default buffers <buf>%%  |  %%qos port <slot/port[-port]> maximum depth <val>%%  |
|  %%qos port slot/port no maximum default depth%%  |  %%qos port <slot/port[-port]> no maximum depth%%  |
|  %%qos port slot/port maximum default buffers <buf>%%  |  %%removed%%  |
|  %%qos port slot/port no maximum default buffers%%  |  %%removed%%  |
|  %%show qos port [slot/port] [statistics]%%  |  %%removed%%  |
|  %%show qos queue%%  |  %%removed%%  |
|  %%show qos slice [slot/slice]%%  |  %%no change%%  |
|  %%show qos log%%  |  %%no change%%  |
|  %%show qos config%%  |  %%no change%%  |
|  %%show qos statistics%%  |  %%no change%%  |
|  %%show qos classify%%  |  %%removed%%  |
|  %%policy import <string>%%  |  %%removed%%  |
|  %%policy rule rule_name [enable | disable] [from {ldap | cli}] [precedence precedence] [condition condition] [action action] [validity period name | no validity period] [save] [log [log-interval seconds]] [count {packets | bytes}] [trap | no trap] [default-list | no default-list]%%  |  %%policy rule <rule_name> [enable | disable] [from {ldap | cli}] [precedence <precedence>] [condition <condition>] [action <action>] [validity-period <name> | no validity-period] [save] [log [log-interval <seconds>]] [count {packets | bytes}] [trap | no-trap] [default-list]%%  |
|  %%no policy rule rule_name%%  |  %%no change%%  |
|  %%policy rule rule_name no {reflexive | save | log | default-list | trap | validity-period}%%  |  %%no change%%  |
|  %%policy validity period name [[no] days days] [[no] months months] [[no] hours hh:mm to hh:mm | no hours] [interval mm:dd:yyyy hh:mm to mm:dd:yyyy hh:mm | no interval]%%  |  %%policy validity-period <name> [from {ldap | cli} | days <days> | months <months> | hours <hh:mm> to <hh:mm> | interval <mm:dd:yyyy> <hh:mm> to <mm:dd:yyyy> <hh:mm>]%%  |
|  %%syntax for command above%%  |  %%policy validity-period <name> no {hours | interval | days <days> | months <months>}%%  |
|  %%no policy validity period name%%  |  %%no policy validity-period <name>%%  |
|  %%policy list list_name [type {unp | vrf | ingress | egress | slb}] [from {ldap | cli}] [enable | disable] [rules rule_name [rule_name2...]]%%  |  %%no change%%  |
|  %%policy list list_name [type {unp | vrf | ingress | egress | slb}] [from {ldap | cli}] [enable | disable] no [rules rule_name [rule_name2...]]%%  |  %%no change%%  |
|  %%no policy list list_name%%  |  %%no change%%  |
|  %%policy list list_name no rules rule_name [rule_name2...]%%  |  %%no change%%  |
|  %%policy network group net_group ip_address [from ldap | from cli] [mask net_mask] [ip_address2 [mask net_mask2]...]%%  |  %%no change%%  |
|  %%no policy network group net_group%%  |  %%no change%%  |
|  %%policy network group net_group [from ldap | from cli] no ip_address [mask netmask] [ip_address2 [mask net_mask2]...]%%  |  %%no change%%  |
|  %%policy service group service_group [from ldap | from cli] service_name1 [service_name2...]%%  |  %%no change%%  |
|  %%no policy service group service_group%%  |  %%no change%%  |
|  %%policy service group service_group [from ldap | from cli] no service_name1 [service_name2...]%%  |  %%no change%%  |
|  %%policy mac group mac_group [from ldap | from cli] mac_address [mask mac_mask] [mac_address2 [mask mac_mask2]...]%%  |  %%no change%%  |
|  %%no policy mac group mac_group%%  |  %%no change%%  |
|  %%policy mac group mac_group [from ldap | from cli] no mac_address [mask mac_mask] [mac_address2 [mask mac_mask2]...]%%  |  %%no change%%  |
|  %%policy port group group_name [from ldap | from cli] slot/port[-port] [slot/port[-port]...]%%  |  %%no change%%  |
|  %%no policy port group group_name%%  |  %%no change%%  |
|  %%policy port group group_name [from ldap | from cli] no slot/port[-port] [slot/port[-port]...]%%  |  %%no change%%  |
|  %%policy map group map_group [from ldap | from cli] {value1:value2...}%%  |  %%no change%%  |
|  %%no policy map group map_group%%  |  %%no change%%  |
|  %%policy map group [from ldap | from cli] no {value1:value2...}%%  |  %%no change%%  |
|  %%policy service service_name%%  |  %%no change%%  |
|  %%no policy service service_name%%  |  %%no change%%  |
|  %%policy service service_name protocol protocol {[source ip port port[-port]] [destination ip port port[-port]]}%%  |  %%policy service <service_name> protocol <protocol> {[source ip-port <port[-port]>] [destination ip-port <port[-port]>]}%%  |
|  %%policy service service_name [no source ip port] [no destination ip port]%%  |  %%policy service <service_name> no {[source ip-port] [destination ip-port]}%%  |
|  %%policy service service_name source tcp port port[-port]%%  |  %%policy service <service_name> source tcp-port <port[-port]>%%  |
|  %%policy service service_name no source tcp port%%  |  %%policy service <service_name> no source tcp-port%%  |
|  %%policy service service_name destination tcp port port[-port]%%  |  %%policy service <service_name> destination tcp-port <port[-port]>%%  |
|  %%policy service service_name no destination tcp port%%  |  %%policy service <service_name> no destination tcp-port%%  |
|  %%policy service service_name source udp port port[-port]%%  |  %%policy service <service_name> source udp-port <port[-port]>%%  |
|  %%policy service service_name no source udp port%%  |  %%policy service <service_name> no source udp-port%%  |
|  %%policy service service_name destination udp port port[-port]%%  |  %%policy service <service_name> destination udp-port <port[-port]>%%  |
|  %%policy service service_name no destination udp port%%  |  %%policy service <service_name> no destination udp-port%%  |
|  %%policy condition condition_name%%  |  %%no change%%  |
|  %%no policy condition condition_name%%  |  %%no change%%  |
|  %%policy condition condition_name source ip ip_address [mask netmask]%%  |  %%no change%%  |
|  %%policy condition condition_name no source ip%%  |  %%no change%%  |
|  %%policy condition condition_name source ipv6 {any | ipv6_address [mask netmask]}%%  |  %%no change%%  |
|  %%policy condition condition_name no source ipv6%%  |  %%no change%%  |
|  %%policy condition condition_name destination ip ip_address [mask netmask]%%  |  %%no change%%  |
|  %%policy condition condition_name no destination ip%%  |  %%no change%%  |
|  %%policy condition condition_name destination ipv6 {any | ipv6_address [mask netmask]}%%  |  %%no change%%  |
|  %%policy condition condition_name no destination ipv6%%  |  %%no change%%  |
|  %%policy condition condition_name multicast ip ip_address [mask netmask]%%  |  %%no change%%  |
|  %%policy condition condition_name no multicast ip%%  |  %%no change%%  |
|  %%policy condition condition_name multicast ipv6 ip_address [mask netmask]%%  |  %%no change%%  |
|  %%policy condition condition_name no multicast ipv6%%  |  %%no change%%  |
|  %%policy condition condition_name source network group network_group%%  |  %%no change%%  |
|  %%policy condition condition_name no source network group%%  |  %%no change%%  |
|  %%policy condition condition_name destination network group network_group%%  |  %%no change%%  |
|  %%policy condition condition_name no destination network group%%  |  %%no change%%  |
|  %%policy condition condition_name multicast network group multicast_group%%  |  %%no change%%  |
|  %%policy condition condition_name no multicast network group%%  |  %%no change%%  |
|  %%policy condition condition_name source ip port port[-port]%%  |  %%policy condition <condition_name> source ip-port <port[-port]>%%  |
|  %%policy condition condition_name no source ip port%%  |  %%policy condition <condition_name> no source ip-port%%  |
|  %%policy condition condition_name destination ip port port[-port]%%  |  %%policy condition <condition_name> destination ip-port <port[-port]>%%  |
|  %%policy condition condition_name no destination ip port%%  |  %%policy condition <condition_name> no destination ip-port%%  |
|  %%policy condition condition_name source tcp port port[-port]%%  |  %%policy condition <condition_name> source tcp-port <port[-port]>%%  |
|  %%policy condition condition_name no source tcp port%%  |  %%policy condition <condition_name> no source tcp-port%%  |
|  %%policy condition condition_name destination tcp port port[-port]%%  |  %%policy condition <condition_name> destination tcp-port <port[-port]>%%  |
|  %%policy condition condition_name no destination tcp port%%  |  %%policy condition <condition_name> no destination tcp-port%%  |
|  %%policy condition condition_name source udp port port[-port]%%  |  %%policy condition <condition_name> source udp-port <port[-port]>%%  |
|  %%policy condition condition_name no source udp port%%  |  %%policy condition <condition_name> no source udp-port%%  |
|  %%policy condition condition_name destination udp port port[-port]%%  |  %%policy condition <condition_name> destination udp-port <port[-port]>%%  |
|  %%policy condition condition_name no destination udp port%%  |  %%policy condition <condition_name> no destination udp-port%%  |
|  %%policy condition condition_name ethertype etype%%  |  %%no change%%  |
|  %%policy condition condition_name no ethertype%%  |  %%no change%%  |
|  %%policy condition condition_name established%%  |  %%no change%%  |
|  %%policy condition condition_name no established%%  |  %%no change%%  |
|  %%policy condition condition_name tcpflags [any | all] {F | S | R | P | A | U | E | W} mask {F | S | R | P | A | U | E | W}%%  |  %%no change%%  |
|  %%policy condition condition_name no tcpflags%%  |  %%no change%%  |
|  %%policy condition condition_name service service_name%%  |  %%no change%%  |
|  %%policy condition condition_name no service%%  |  %%no change%%  |
|  %%policy condition condition_name service group service_group%%  |  %%no change%%  |
|  %%policy condition condition_name no service group%%  |  %%no change%%  |
|  %%policy condition condition_name icmptype type%%  |  %%no change%%  |
|  %%policy condition condition_name no icmptype%%  |  %%no change%%  |
|  %%policy condition condition_name icmpcode code%%  |  %%no change%%  |
|  %%policy condition condition_name no icmpcode%%  |  %%no change%%  |
|  %%policy condition condition_name ip protocol protocol%%  |  %%policy condition <condition_name> ip-protocol <protocol>%%  |
|  %%policy condition condition_name no ip protocol%%  |  %%policy condition <condition_name> no ip-protocol%%  |
|  %%policy condition condition_name ipv6%%  |  %%no change%%  |
|  %%policy condition condition_name no ipv6%%  |  %%no change%%  |
|  %%policy condition condition_name nh next_header_value%%  |  %%no change%%  |
|  %%policy condition condition_name no nh%%  |  %%no change%%  |
|  %%policy condition condition_name flow-label flow_label_value%%  |  %%no change%%  |
|  %%policy condition condition_name no flow-label%%  |  %%no change%%  |
|  %%policy condition condition_name tos tos_value [mask tos_mask]%%  |  %%no change%%  |
|  %%policy condition conditioning no tos%%  |  %%no change%%  |
|  %%policy condition condition_name dscp {dscp_value[-value]} [mask dscp_mask]%%  |  %%no change%%  |
|  %%policy condition condition_name no dscp%%  |  %%no change%%  |
|  %%policy condition condition_name source mac mac_address [mask mac_mask]%%  |  %%no change%%  |
|  %%policy condition condition_name no source mac%%  |  %%no change%%  |
|  %%policy condition condition_name destination mac mac_address [mask mac_mask]%%  |  %%no change%%  |
|  %%policy condition condition_name no destination mac%%  |  %%no change%%  |
|  %%policy condition condition_name source mac group group_name%%  |  %%no change%%  |
|  %%policy condition condition_name no source mac group%%  |  %%no change%%  |
|  %%policy condition condition_name destination mac group mac_group%%  |  %%no change%%  |
|  %%policy condition condition_name no destination mac group%%  |  %%no change%%  |
|  %%policy condition condition_name source vlan vlan_id%%  |  %%no change%%  |
|  %%policy condition condition_name no source vlan%%  |  %%no change%%  |
|  %%policy condition condition_name inner source vlan vlan_id%%  |  %%policy condition <condition_name> inner source-vlan <vlan_id>%%  |
|  %%policy condition condition_name no inner source vlan%%  |  %%policy condition <condition_name> no inner source-vlan%%  |
|  %%policy condition condition_name destination vlan vlan_id%%  |  %%no change%%  |
|  %%policy condition condition_name no destination vlan%%  |  %%no change%%  |
|  %%policy condition condition_name 802.1p 802.1p_value%%  |  %%no change%%  |
|  %%policy condition condition_name no 802.1p%%  |  %%no change%%  |
|  %%policy condition condition_name inner 802.1p 802.1p_value%%  |  %%no change%%  |
|  %%policy condition condition_name no inner 802.1p%%  |  %%no change%%  |
|  %%policy condition condition_name source port slot/port[-port]%%  |  %%no change%%  |
|  %%policy condition condition_name no source port%%  |  %%no change%%  |
|  %%policy condition condition_name destination port slot/port[-port]%%  |  %%no change%%  |
|  %%policy condition condition_name no destination port%%  |  %%no change%%  |
|  %%policy condition condition_name source port group group_name%%  |  %%no change%%  |
|  %%policy condition condition_name no source port group%%  |  %%no change%%  |
|  %%policy condition condition_name destination port group group_name%%  |  %%no change%%  |
|  %%policy condition condition_name no destination port group%%  |  %%no change%%  |
|  %%policy condition condition_name vrf {vrf_name | default}%%  |  %%no change%%  |
|  %%policy condition condition_name no vrf%%  |  %%no change%%  |
|  %%policy condition condition_name source interface type [ethernet | wan | ethernet-10 | ethernet-100 | ethernet-1G | ethernet-10G]%%  |  %%removed%%  |
|  %%policy condition condition_name no source interface type%%  |  %%removed%%  |
|  %%policy condition condition_name destination interface type [ethernet | wan | ethernet-10 | ethernet-100 | ethernet-1G | ethernet-10G]%%  |  %%removed%%  |
|  %%policy condition condition_name no destination interface type%%  |  %%removed%%  |
|  %%new command%%  |  %%policy condition <condition_name> [no] fragments%%  |
|  %%policy action action_name%%  |  %%no change%%  |
|  %%policy no action action_name%%  |  %%no change%%  |
|  %%policy action action_name disposition {accept | drop | deny}%%  |  %%no change%%  |
|  %%policy action action_name no disposition%%  |  %%no change%%  |
|  %%policy action action_name shared%%  |  %%no change%%  |
|  %%policy action action_name no shared%%  |  %%no change%%  |
|  %%policy action action_name priority priority_value%%  |  %%no change%%  |
|  %%policy action action_name no priority%%  |  %%no change%%  |
|  %%policy action action_name maximum bandwidth bps%%  |  %%no change%%  |
|  %%policy action action_name no maximum bandwidth%%  |  %%no change%%  |
|  %%policy action action_name minimum bandwidth bps%%  |  %%removed%%  |
|  %%policy action action_name no minimum bandwidth%%  |  %%removed%%  |
|  %%policy action action_name maximum depth bytes%%  |  %%no change%%  |
|  %%policy action action_name no maximum depth%%  |  %%no change%%  |
|  %%policy action action_name maximum buffers val%%  |  %%removed%%  |
|  %%policy action action_name no maximum buffers%%  |  %%removed%%  |
|  %%policy action action_name minimum buffers val%%  |  %%no change%%  |
|  %%policy action action_name no minimum buffers%%  |  %%no change%%  |
|  %%policy action action_name minimum depth bytes%%  |  %%removed%%  |
|  %%policy action action_name no minimum depth%%  |  %%removed%%  |
|  %%policy action action_name tos tos_value%%  |  %%no change%%  |
|  %%policy action action_name no tos%%  |  %%no change%%  |
|  %%policy action action_name 802.1p 802.1p_value%%  |  %%no change%%  |
|  %%policy action action_name no 802.1p%%  |  %%no change%%  |
|  %%policy action action_name dscp dscp_value%%  |  %%no change%%  |
|  %%policy action action_name no dscp%%  |  %%no change%%  |
|  %%policy action map {802.1p | tos | dscp} to {802.1p | tos| dscp} using map_group%%  |  %%no change%%  |
|  %%policy action no map%%  |  %%no change%%  |
|  %%policy action action_name permanent gateway ip ip_address%%  |  %%policy action <action_name> permanent gateway-ip <ip_address>%%  |
|  %%policy action action_name no permanent gateway ip%%  |  %%policy action <action_name> no permanent gateway-ip%%  |
|  %%policy action action_name alternate gateway ip ip_address%%  |  %%removed%%  |
|  %%policy action action_name no alternate gateway ip%%  |  %%removed%%  |
|  %%policy action action_name port-disable%%  |  %%no change%%  |
|  %%policy action action_name no port-disable%%  |  %%no change%%  |
|  %%policy action action_name redirect port slot/port%%  |  %%no change%%  |
|  %%policy action action_name no redirect port%%  |  %%no change%%  |
|  %%policy action action_name redirect linkagg link_agg%%  |  %%no change%%  |
|  %%policy action action_name no redirect linkagg%%  |  %%no change%%  |
|  %%policy action action_name no-cache%%  |  %%no change%%  |
|  %%policy action action_name no no-cache%%  |  %%no change%%  |
|  %%policy action action_name [ingress | egress | ingress egress] mirror slot/port%%  |  %%no change%%  |
|  %%policy action action_name no mirror%%  |  %%no change%%  |
|  %%new command%%  |  %%policy action <action_name> {pir <rate> | pbs <size> | cir <rate> | cbs <size> | cpu-priority <0-7>}%%  |
|  %%new command parameter%%  |  %%policy action <action_name>  cir <rate> cbs <size> [[no] color-only]}%%  |
|  %%new command parameter%%  |  %%policy action <action_name>  cir <rate> cbs <size> pir <rate> pbs <size> [[no] color-only]}%%  |
|  %%show policy classify {l2 | l3 | multicast} [applied]%%  |  %%no change%%  |
|  %%show policy classify {l2 | l3 | multicast} [applied] source port slot/port%%  |  %%no change%%  |
|  %%show policy classify {l2 | l3 | multicast} [applied] destination port slot/port%%  |  %%no change%%  |
|  %%show policy classify {l2 | l3 | multicast} [applied] source mac mac_address%%  |  %%no change%%  |
|  %%show policy classify {l2 | l3 | multicast} [applied] destination mac mac_address%%  |  %%no change%%  |
|  %%show policy classify {l2 | l3 | multicast} [applied] source vlan vlan_id%%  |  %%no change%%  |
|  %%show policy classify {l2 | l3 | multicast} [applied] destination vlan vlan_id%%  |  %%no change%%  |
|  %%show policy classify {l2 | l3 | multicast} [applied] source interface type {ethernet | wan | ethernet-10 | ethernet-100 | ethernet-1G | ethernet-10G}%%  |  %%removed%%  |
|  %%show policy classify {l2 | l3 | multicast} [applied] destination interface type {ethernet | wan | ethernet-10 | ethernet-100 | ethernet-1G | ethernet-10G}%%  |  %%removed%%  |
|  %%show policy classify {l2 | l3 | multicast} [applied] source ip ip_address%%  |  %%no change%%  |
|  %%show policy classify {l2 | l3 | multicast} [applied] destination ip ip_address%%  |  %%no change%%  |
|  %%show policy classify {l2 | l3 | multicast} [applied] multicast ip ip_address%%  |  %%no change%%  |
|  %%show policy classify {l2 | l3 | multicast} [applied] tos tos_value%%  |  %%no change%%  |
|  %%show policy classify {l2 | l3 | multicast} [applied] dscp dscp_value%%  |  %%no change%%  |
|  %%show policy classify {l2 | l3 | multicast} [applied] 802.1p 802.1p_value%%  |  %%no change%%  |
|  %%show policy classify {l2 | l3 | multicast} [applied] ip protocol protocol%%  |  %%no change%%  |
|  %%show policy classify {l2 | l3 | multicast} [applied] source ip port port%%  |  %%no change%%  |
|  %%show policy classify {l2 | l3 | multicast} [applied] destination ip port port%%  |  %%no change%%  |
|  %%show policy classify {l2 | l3 | multicast} [applied] applied%%  |  %%no change%%  |
|  %%show [applied] policy network group [network_group]%%  |  %%no change%%  |
|  %%show [applied] policy service [service_name]%%  |  %%no change%%  |
|  %%show [expanded] [applied] policy service group [service_group]%%  |  %%no change%%  |
|  %%show [applied] policy mac group [mac_group]%%  |  %%no change%%  |
|  %%show [applied] policy port group [group_name]%%  |  %%no change%%  |
|  %%show [applied] policy map group [group_name]%%  |  %%no change%%  |
|  %%show [expanded | verbose] [applied] policy action [action_name]%%  |  %%no change%%  |
|  %%show [expanded | verbose] [applied] policy condition [condition_name]%%  |  %%no change%%  |
|  %%show [expanded | verbose] [applied | active] [bridged | routed | multicast] policy rule [rule_name]%%  |  %%no change%%  |
|  %%show policy validity period [name]%%  |  %%show policy validity-period [<name>]%%  |
|  %%show active policy list [list_name]%%  |  %%no change%%  |
|  %%show [applied] policy list [list_name]%%  |  %%no change%%  |
|  %%%%  |  %%%%  |
===== RIP =====
^  6.4.2.R01 Command  ^  7.1.1.R01 Command  ^
|  %%ip load rip%%  |  %%no change%%  |
|  %%ip rip status {enable | disable}%%  |  %%ip rip admin-state {enable | disable}%%  |
|  %%ip rip interface {interface_name}%%  |  %%no change%%  |
|  %%no ip rip interface {interface_name}%%  |  %%no change%%  |
|  %%ip rip interface {interface_name} status {enable | disable}%%  |  %%ip rip interface {interface_name} admin-state {enable | disable}%%  |
|  %%ip rip interface {interface_name} metric value%%  |  %%no change%%  |
|  %%ip rip interface {interface_name} send-version {none | v1 | v1compatible | v2}%%  |  %%no change%%  |
|  %%ip rip interface {interface_name} recv-version {v1 | v2 | both | none}%%  |  %%no change%%  |
|  %%ip rip force-holddowntimer seconds%%  |  %%no change%%  |
|  %%ip rip host-route%%  |  %%no change%%  |
|  %%no ip rip host-route%%  |  %%no change%%  |
|  %%ip rip route-tag value%%  |  %%no change%%  |
|  %%ip rip interface {interface_name} auth-type {none | simple | md5}%%  |  %%no change%%  |
|  %%ip rip interface {interface_name} auth-key string%%  |  %%no change%%  |
|  %%ip rip update-interval seconds%%  |  %%no change%%  |
|  %%ip rip invalid-timer seconds%%  |  %%no change%%  |
|  %%ip rip garbage-timer seconds%%  |  %%no change%%  |
|  %%ip rip holddown-timer seconds%%  |  %%no change%%  |
|  %%show ip rip%%  |  %%no change%%  |
|  %%show ip rip routes [ip_address ip_mask]%%  |  %%no change%%  |
|  %%show ip rip interface [interface_name]%%  |  %%no change%%  |
|  %%show ip rip peer [ip_address]%%  |  %%no change%%  |
|  %%new command%%  |  %%ip rip interface {interface_name} ingress-filter [filter_route_map_name]%%  |
|  %%new command%%  |  %%ip rip interface {interface_name} egress-filter [filter_route_map_name]%%  |
|  %%new command%%  |  %%no ip rip interface {interface_name} ingress-filter%%  |
|  %%new command%%  |  %%no ip rip interface {interface_name} egress-filter%%  |
===== SFLOW =====
^  6.4.2.R01 Command  ^  7.1.1.R01 Command  ^
|  %%sflow agent ip <ip_address>%%  |  %%no change%%  |
|  %%no sflow agent ip <ip_address>%%  |  %%no change%%  |
|  %%sflow receiver <num> [name <string> | timeout {<seconds> | forever} | address {<ip_address> | <ipv6address>} | udp-port <port> | packet-size <size> | Version <num>]%%  |  %%sflow receiver <receiver_index> {name <string> | timeout {<seconds> | forever} | address {<ip_address> | <ipv6address>} | udp-port <port> | packet-size <size> Version <num> | release}%%  |
|  %%sflow receiver <receiver_index> [release]%%  |  %%sflow receiver <receiver_index> {name <string> | timeout {<seconds> | forever} | address {<ip_address> | <ipv6address>} | udp-port <port> | packet-size <size> Version <num> | release}%%  |
|  %%sflow sampler <num> <portlist> [receiver <receiver_index> | rate <value> | sample-hdr-size <size>]%%  |  %%sflow sampler <num> port <slot/port[-port]> {receiver <receiver_index> | rate <value> | sample-hdr-size <size>}%%  |
|  %%no sflow sampler <num> <portlist>%%  |  %%no change%%  |
|  %%sflow poller <num> <portlist> [receiver <receiver_index> | interval <value>]%%  |  %%sflow poller <num> port <slot/port[-port]> {receiver <receiver_index> | interval <value>}%%  |
|  %%no sflow poller <num> <portlist>%%  |  %%no change%%  |
|  %%show sflow agent%%  |  %%no change%%  |
|  %%show sflow receiver [<num>]%%  |  %%no change%%  |
|  %%show sflow sampler [<num>]%%  |  %%no change%%  |
|  %%show sflow poller [<num>]%%  |  %%no change%%  |
===== SLB =====
^  6.4.2.R01 Command  ^  7.1.1.R01 Command  ^
|  %%ip slb admin {enable | disable}%%  |  %%ip slb admin-state {enable | disable}%%  |
|  %%ip slb reset statistics%%  |  %%no change%%  |
|  %%ip slb cluster name {vip ip_address | condition string} [l3 | l2]%%  |  %%no change%%  |
|  %%no ip slb cluster name%%  |  %%no change%%  |
|  %%ip slb cluster cluster_name admin status {enable | disable}%%  |  %%ip slb cluster <cluster_name> admin-state {enable | disable}%%  |
|  %%ip slb cluster cluster_name ping period seconds%%  |  %%no change%%  |
|  %%ip slb cluster cluster_name ping timeout milliseconds%%  |  %%no change%%  |
|  %%ip slb cluster cluster_name ping retries count%%  |  %%no change%%  |
|  %%ip slb cluster cluster_name probe probe_name%%  |  %%no change%%  |
|  %%ip slb server ip ip_address cluster cluster_name [admin status {enable | disable}]%%  |  %%ip slb server ip <ip_address> cluster <cluster_name> [admin-state {enable | disable}]%%  |
|  %%no ip slb server ip ip_address cluster cluster_name%%  |  %%no change%%  |
|  %%ip slb server ip ip_address cluster cluster_name probe probe_name%%  |  %%no change%%  |
|  %%ip slb probe probe_name {ftp | http | https | imap | imaps | nntp | ping | pop | pops | smtp | tcp | udp}%%  |  %%no change%%  |
|  %%no ip slb probe probe_name%%  |  %%no change%%  |
|  %%ip slb probe probe_name {ftp | http | https | imap | imaps | nntp | ping | pop | pops | smtp | tcp | udp} timeout seconds%%  |  %%no change%%  |
|  %%ip slb probe probe_name {ftp | http | https | imap | imaps | nntp | ping | pop | pops | smtp | tcp | udp} period seconds%%  |  %%no change%%  |
|  %%ip slb probe probe_name {ftp | http | https | imap | imaps | nntp | ping | pop | pops | smtp | tcp | udp} port port_number%%  |  %%no change%%  |
|  %%ip slb probe probe_name {ftp | http | https | imap | imaps | nntp | ping | pop | pops | smtp | tcp | udp} retries retries%%  |  %%no change%%  |
|  %%ip slb probe probe_name {http | https} username user_name%%  |  %%no change%%  |
|  %%ip slb probe probe_name {http | https} password password%%  |  %%no change%%  |
|  %%ip slb probe probe_name {http | https} url url%%  |  %%no change%%  |
|  %%ip slb probe probe_name {http | https} status status_value%%  |  %%no change%%  |
|  %%ip slb probe probe_name {tcp | udp} send send_string%%  |  %%no change%%  |
|  %%ip slb probe probe_name {http | https | tcp | udp} expect expect_string%%  |  %%no change%%  |
|  %%show ip slb clusters [statistics]%%  |  %%no change%%  |
|  %%show ip slb cluster name [statistics]%%  |  %%no change%%  |
|  %%show ip slb cluster name server ip_address%%  |  %%no change%%  |
|  %%show ip slb servers%%  |  %%no change%%  |
|  %%show ip slb probes [probe_name]%%  |  %%no change%%  |
===== SNMP =====
^  6.4.2.R01 Command  ^  7.1.1.R01 Command  ^
|  %%SNMP SECURITY {NO SECURITY | AUTHENTICATION {SET | ALL} | PRIVACY {SET | ALL} | TRAP ONLY}%%  |  %%snmp security {no-security | authentication {set | all} | privacy {set | all} | trap-only}%%  |
|  %%SHOW SNMP SECURITY%%  |  %%no change%%  |
|  %%SHOW SNMP STATISTICS%%  |  %%no change%%  |
|  %%SHOW SNMP MIB FAMILY [<string>]%%  |  %%show snmp mib-family [<string>]%%  |
|  %%SNMP AUTHENTICATION TRAP {ENABLE | DISABLE}%%  |  %%snmp authentication-trap {enable | disable}%%  |
|  %%SHOW SNMP AUTHENTICATION TRAP%%  |  %%show snmp authentication-trap%%  |
|  %%SNMP COMMUNITY MAP MODE {ENABLE | DISABLE}%%  |  %%snmp community-map mode {enable | disable}%%  |
|  %%SNMP COMMUNITY MAP <map> {ENABLE | DISABLE}%%  |  %%snmp community-map <map> {enable | disable}%%  |
|  %%SNMP COMMUNITY MAP <map> USER <user>%%  |  %%snmp community-map <map> user <user_name>%%  |
|  %%SNMP COMMUNITY MAP <map> USER <user> {ENABLE | DISABLE}%%  |  %%snmp community-map <map> user <user_name> {enable | disable}%%  |
|  %%NO SNMP COMMUNITY MAP <string>%%  |  %%no snmp community-map <map>%%  |
|  %%SHOW SNMP COMMUNITY MAP%%  |  %%show snmp community-map%%  |
|  %%SHOW SNMP OBJECT NAME <string>%%  |  %%no change%%  |
|  %%SHOW SNMP OBJECT IDENTIFIER <string>%%  |  %%no change%%  |
|  %%SNMP SOURCE IP PREFERRED {DEFAULT | NO-LOOPBACK0 | <ip_address>}%%  |  %%snmp source-ip-preferred {default | no-loopback0 | <ip_address>}%%  |
|  %%NO SNMP SOURCE IP PREFERRED%%  |  %%no snmp source-ip-preferred%%  |
|  %%SNMP STATION <ip_address> {<port> | <user_name> | V1 | V2 | V3 | ENABLE | DISABLE}+%%  |  %%no change%%  |
|  %%NO SNMP STATION <ip_address>%%  |  %%no change%%  |
|  %%SHOW SNMP STATION%%  |  %%no change%%  |
|  %%SNMP TRAP REPLAY <ip_address> [<seq_id>]%%  |  %%snmp-trap replay-ip <ip_address> [<seq_id>]%%  |
|  %%SNMP TRAP FILTER <ip_address> {<trap_id>}+%%  |  %%snmp-trap filter-ip <ip_address> {<trap_id>}+%%  |
|  %%NO SNMP TRAP FILTER <ip_address> {<trap_id>}+%%  |  %%no snmp-trap filter-ip <ip_address> {<trap_id>}+%%  |
|  %%SHOW SNMP TRAP FILTER%%  |  %%show snmp-trap filter-ip%%  |
|  %%SHOW SNMP TRAP REPLAY%%  |  %%show snmp-trap replay-ip%%  |
|  %%SHOW SNMP TRAP CONFIG%%  |  %%show snmp-trap config%%  |
|  %%SNMP TRAP ABSORPTION {ENABLE | DISABLE}%%  |  %%snmp-trap absorption {enable | disable}%%  |
|  %%SNMP TRAP TO WEBVIEW {ENABLE | DISABLE}%%  |  %%snmp-trap to-webview {enable | disable}%%  |
===== SOURCE LEARNING =====
^  6.4.2.R01 Command  ^  7.1.1.R01 Command  ^
|  %%mac-address-table [permanent] mac_address {slot/port | linkagg link_agg} vid [bridging | filtering] %%  |  %%mac-learning vlan <vid> {port <slot/port> | linkagg <link_agg>} static mac-address <mac_address>  [bridging | filtering] %%  |
|  %%no mac-address-table [permanent | learned] [mac_address {slot/port | linkagg link_agg} vid] %%  |  %%no mac-learning [vlan <vid>] [port <slot/port> | linkagg <link_agg>] {static | dynamic} [mac-address <mac_address>] %%  |
|  %%mac-address-table static-multicast multicast_address {slot1/port1[-port1a][slot2/port2[| linkagg link_agg} vid %%  |  %%mac-learning vlan <vid> {port <slot1/port1[-port1]> <[slot2/port2]> | linkagg <link_agg>}  multicast mac-address <multicast_address> [group <groupid>] %%  |
|  %%no mac-address-table static-multicast [<mac_address>  {slot1/port1[-port1a][slot2/port2[| linkagg link_agg} vid]  %%  |  %%no mac-learning [vlan <vid>] [port <slot1/port1[-port1]> <[slot2/port2]> | linkagg <link_agg>] { multicast } [mac-address <multicast_address>] %%  |
|  %%source-learning {port <slot/port>|linkagg <agg_num>} enable|disable %%  |  %%mac-learning {port <slot/port>| linkagg <link_agg>} {enable|disable} %%  |
|  %%show source-learning [port slot/port | linkagg link_agg] %%  |  %%show mac-learning learning-state [slot <slot> | port <slot/port> | linkagg <link_agg>] %%  |
|  %%show mac-address-table [permanent | learned | quarantined] [mac_address] [slot slot | slot/port] [linkagg link_agg][vid | vid1-vid2] %%  |  %%show mac-learning [summary] [multicast | static | dynamic] [vlan <vid1[-vid2]>] [slot <slot> | port <slot/port>] [linkagg <link_agg>] [mac-address <mac_address>] %%  |
|  %%show mac-address-table static-multicast [<mac_addr>] [slot slot | slot/port] [linkagg link_agg][vid | vid1-vid2] %%  |  %%already included in previous line %%  |
|  %%show mac-address-table count [mac_address] [slot slot | slot/port] [linkagg link_agg][vid | vid1-vid2] %%  |  %%already included in previous line %%  |
|  %%mac-address-table aging-time <seconds> %%  |  %%mac-learning aging-time {<seconds>|default} %%  |
|  %%no mac-address-table aging-time %%  |  %%already included in previous line %%  |
|  %%source-learning chassis-distributed {enable|disable} %%  |  %%mac-learning mode [centralized | distributed] %%  |
|  %%show source-learning chassis-distributed %%  |  %%show mac-learning mode %%  |
===== STP =====
^  6.4.2.R01 Command  ^  7.1.1.R01 Command  ^
|  %%bridge mode {flat | 1x1}%%  |  %%spantree mode {flat | per-vlan}%%  |
|  %%bridge protocol {stp | rstp | mstp}%%  |  %%spantree protocol {stp | rstp | mstp}%%  |
|  %%bridge <instance> protocol {stp | rstp | mstp}%%  |  %%removed%%  |
|  %%bridge cist protocol {stp | rstp | mstp}%%  |  %%spantree cist protocol {stp | rstp | mstp}%%  |
|  %%bridge 1x1 <vid> protocol {stp | rstp}%%  |  %%spantree  vlan <vid> protocol {stp | rstp}%%  |
|  %%bridge mst <msti_id> region name <name>%%  |  %%spantree mst <msti_id> region name <name>%%  |
|  %%bridge mst <msti_id> region no name%%  |  %%no spantree mst <msti_id> region name%%  |
|  %%bridge mst <msti_id> region revision level <rev_level>%%  |  %%spantree mst <msti_id> region revision-level <rev_level>%%  |
|  %%bridge mst <msti_id> region max hops <max_hops>%%  |  %%spantree mst <msti_id> region max-hops <max_hops>%%  |
|  %%bridge msti <msti_id> [name <name>]%%  |  %%spantree msti <msti_id> msti_id [name <name>]%%  |
|  %%bridge no msti <msti_id>%%  |  %%no spantree msti <msti_id>%%  |
|  %%bridge msti <msti_id> no name%%  |  %%no spantree msti <msti_id> name%%  |
|  %%bridge msti <msti_id> vlan <vid_range>%%  |  %%spantree msti <msti_id> vlan <vid_range>%%  |
|  %%bridge msti <msti_id> no vlan <vid_range>%%  |  %%no spantree msti <msti_id> vlan <vid_range>%%  |
|  %%bridge priority <priority>%%  |  %%spantree priority <priority>%%  |
|  %%bridge <instance> priority <priority>%%  |  %%removed%%  |
|  %%bridge cist priority <priority>%%  |  %%spantree cist priority <priority>%%  |
|  %%bridge msti <msti_id> priority <priority>%%  |  %%spantree msti <msti_id> priority <priority>%%  |
|  %%bridge 1x1 <vid> priority <priority>%%  |  %%spantree  vlan <vid> priority <priority>%%  |
|  %%bridge hello time <seconds>%%  |  %%spantree hello-time <seconds>%%  |
|  %%bridge <instance> hello time <seconds>%%  |  %%removed%%  |
|  %%bridge cist hello time <seconds>%%  |  %%spantree cist hello-time <seconds>%%  |
|  %%bridge 1x1 vid hello time <seconds>%%  |  %%spantree  vlan <vid> hello-time <seconds>%%  |
|  %%bridge max age <seconds>%%  |  %%spantree max-age <seconds>%%  |
|  %%bridge <instance> max age <seconds>%%  |  %%removed%%  |
|  %%bridge cist max age <seconds>%%  |  %%spantree cist max-age <seconds>%%  |
|  %%bridge 1x1<vid> max age <seconds>%%  |  %%spantree  vlan <vid> max-age <seconds>%%  |
|  %%bridge forward delay <seconds>%%  |  %%spantree forward-delay <seconds>%%  |
|  %%bridge <instance> forward delay <seconds>%%  |  %%removed%%  |
|  %%bridge cist forward delay <seconds>%%  |  %%spantree cist forward-delay <seconds>%%  |
|  %%bridge 1x1 <vid> forward delay <seconds>%%  |  %%spantree  vlan <vid> forward-delay <seconds>%%  |
|  %%bridge  bpdu-switching {enable | disable}%%  |  %%spantree  bpdu-switching {enable | disable}%%  |
|  %%bridge <instance> bpdu-switching {enable | disable}%%  |  %%removed%%  |
|  %%bridge cist bpdu-switching {enable | disable}%%  |  %%spantree cist bpdu-switching {enable | disable}%%  |
|  %%bridge 1x1 <vid> bpdu-switching {enable | disable}%%  |  %%spantree vlan <vid> bpdu-switching {enable | disable}%%  |
|  %%bridge path cost mode {auto | 32bit}%%  |  %%spantree path-cost-mode {auto | 32bit}%%  |
|  %%bridge [msti <msti_id>] auto-vlan-containment {enable | disable}%%  |  %%spantree [msti <msti_id>] auto-vlan-containment {enable | disable}%%  |
|  %%bridge instance {slot/port | logical_port} {enable | disable}%%  |  %%removed%%  |
|  %%bridge cist {slot/port | logical_port} {enable | disable}%%  |  %%spantree cist {port <slot/port1[-port2]> | linkagg <linkagg1[-linkagg2]>} {enable | disable}%%  |
|  %%bridge 1x1<vid> {slot/port | logical_port} {enable | disable}%%  |  %%spantree  vlan <vid> {port <slot/port1[-port2]> | linkagg <linkagg1[-linkagg2]>} {enable | disable}%%  |
|  %%bridge instance {slot/port | logical_port} priority priority%%  |  %%removed%%  |
|  %%bridge cist {slot/port | logical_port} priority priority%%  |  %%spantree cist {port <slot/port1[-port2]> | linkagg <linkagg1[-linkagg2]>} priority priority%%  |
|  %%bridge msti <msti_id> {slot/port | logical_port} priority priority%%  |  %%spantree msti <msti_id> {port <slot/port> | linkagg <linkagg1[-linkagg2]>} priority priority%%  |
|  %%bridge 1x1<vid> {slot/port | logical_port} priority priority%%  |  %%spantree  vlan <vid> {port <slot/port1[-port2]> | linkagg <linkagg1[-linkagg2]>} priority priority%%  |
|  %%bridge instance {slot/port | logical_port} path cost path_cost%%  |  %%removed%%  |
|  %%bridge cist {slot/port | logical_port} path cost path_cost%%  |  %%spantree cist {port <slot/port1[-port2]> | linkagg <linkagg1[-linkagg2]>} path-cost path_cost%%  |
|  %%bridge msti <msti_id> {slot/port | logical_port} path cost path_cost%%  |  %%spantree msti <msti_id> {port <slot/port> | linkagg <linkagg1[-linkagg2]>} path-cost path_cost%%  |
|  %%bridge 1x1 <vid> {slot/port | logical_port} path cost path_cost%%  |  %%spantree  vlan <vid> {port <slot/port1[-port2]> | linkagg <linkagg1[-linkagg2]>} path-cost path_cost%%  |
|  %%bridge instance {slot/port | logical_port} mode {forwarding | blocking | dynamic}%%  |  %%removed%%  |
|  %%bridge cist {slot/port | logical_port} mode {dynamic | blocking | forwarding}%%  |  %%spantree cist {port <slot/port1[-port2]> | linkagg <linkagg1[-linkagg2]>} mode {dynamic | blocking | forwarding}%%  |
|  %%bridge 1x1 <vid> {slot/port | logical_port} mode {dynamic | blocking | forwarding}%%  |  %%spantree  vlan <vid> {port <slot/port1[-port2]> | linkagg <linkagg1[-linkagg2]>} mode {dynamic | blocking | forwarding}%%  |
|  %%bridge instance {slot/port | logical_port} connection {noptp | ptp | autoptp | edgeport}%%  |  %%removed%%  |
|  %%bridge cist {slot/port | logical_port} connection {noptp | ptp | autoptp | edgeport}%%  |  %%spantree cist {port <slot/port1[-port2]> | linkagg <linkagg1[-linkagg2]>} connection {noptp | ptp | autoptp}%%  |
|  %%bridge 1x1 <vid> {slot/port | logical_port} connection {noptp | ptp | autoptp | edgeport}%%  |  %%spantree  vlan <vid> {port <slot/port1[-port2]> | linkagg <linkagg1[-linkagg2]>} connection {noptp | ptp | autoptp}%%  |
|  %%bridge cist {slot/port | logical_port} admin-edge {on | off | enable | disable}%%  |  %%spantree cist {port <slot/port1[-port2]> | linkagg <linkagg1[-linkagg2]>} admin-edge {enable | disable}%%  |
|  %%bridge 1x1 <vid> {slot/port | logical_port} admin-edge {on | off | enable | disable}%%  |  %%spantree  vlan <vid> {port <slot/port1[-port2]> | linkagg <linkagg1[-linkagg2]>} admin-edge {enable | disable}%%  |
|  %%bridge cist {slot/port | logical_port} auto-edge {on | off | enable | disable}%%  |  %%spantree cist {port <slot/port1[-port2]> | linkagg <linkagg1[-linkagg2]>} auto-edge {enable | disable}%%  |
|  %%bridge 1x1 <vid> {slot/port | logical_port} auto-edge {on | off | enable | disable}%%  |  %%spantree  vlan <vid> {port <slot/port1[-port2]> | linkagg <linkagg1[-linkagg2]>} auto-edge {enable | disable}%%  |
|  %%bridge cist {slot/port | logical_port} {restricted-role | root-guard} {on | off | enable | disable}%%  |  %%spantree cist {port <slot/port1[-port2]> | linkagg <linkagg1[-linkagg2]>} {restricted-role | root-guard} {enable | disable}%%  |
|  %%bridge 1x1<vid> {slot/port | logical_port} {restricted-role | root-guard} {on | off | enable | disable}%%  |  %%spantree  vlan <vid> {port <slot/port1[-port2]> | linkagg <linkagg1[-linkagg2]>} {restricted-role | root-guard} {enable | disable}%%  |
|  %%bridge cist {slot/port | logical_port} restricted-tcn {on | off | enable | disable}%%  |  %%spantree cist {port <slot/port1[-port2]> | linkagg <linkagg1[-linkagg2]>} restricted-tcn {enable | disable}%%  |
|  %%bridge 1x1<vid> {slot/port | logical_port} restricted-tcn {on | off | enable | disable}%%  |  %%spantree  vlan <vid> {port <slot/port1[-port2]> | linkagg <linkagg1[-linkagg2]>} restricted-tcn {enable | disable}%%  |
|  %%bridge cist txholdcount value%%  |  %%spantree cist txholdcount value%%  |
|  %%bridge 1x1<vid> txholdcount {value}%%  |  %%spantree  vlan <vid> txholdcount {value}%%  |
|  %%bridge port slot/port 10gig os8800optimized {enable | disable}%%  |  %%removed%%  |
|  %%bridge rrstp%%  |  %%removed%%  |
|  %%no bridge rrstp%%  |  %%removed%%  |
|  %%bridge rrstp ring ring_id port1 {slot/port | linkagg agg_num} port2 {slot/port | linkagg agg_num} vlan-tag vlan_id [status {enable | disable}]%%  |  %%removed%%  |
|  %%no bridge rrstp ring [ring_id]%%  |  %%removed%%  |
|  %%bridge rrstp ring ring_id vlan-tag vid%%  |  %%removed%%  |
|  %%bridge rrstp ring ring_id status {enable | disable}%%  |  %%removed%%  |
|  %%show spantree %%  |  %%unchanged%%  |
|  %%show spantree <instance>%%  |  %%removed%%  |
|  %%show spantree cist%%  |  %%unchanged%%  |
|  %%show spantree msti [msti_id]%%  |  %%unchanged%%  |
|  %%show spantree 1x1 [vid]%%  |  %%show spantree  [vlan <vid>]%%  |
|  %%show spantree ports [forwarding | blocking | active | configured]%%  |  %%unchanged%%  |
|  %%show spantree <instance> ports [forwarding | blocking | active | configured]%%  |  %%removed%%  |
|  %%show spantree cist ports [forwarding | blocking | active | configured]%%  |  %%unchanged%%  |
|  %%show spantree msti [msti_id] ports [forwarding | blocking | active | configured]%%  |  %%unchanged%%  |
|  %%show spantree 1x1 [vid] ports [forwarding | blocking | active | configured]%%  |  %%show spantree  [vlan <vid>] ports [forwarding | blocking | active | configured]%%  |
|  %%show spantree mst region%%  |  %%unchanged%%  |
|  %%show spantree mst [msti_id] vlan-map%%  |  %%unchanged%%  |
|  %%show spantree cist vlan-map%%  |  %%unchanged%%  |
|  %%show spantree mst vid vlan-map%%  |  %%unchanged%%  |
|  %%show spantree mst port {slot/port | logical_port}%%  |  %%show spantree mst {port <slot/port> | linkagg <linkagg1[-linkagg2]>}%%  |
|  %%show bridge rrstp configuration%%  |  %%removed%%  |
|  %%show bridge rrstp ring [ring_id]%%  |  %%removed%%  |
|  %%show spantree map-msti%%  |  %%show spantree [vlan <vlan_id>] map-msti%%  |
|  %%bridge mode 1x1 pvst+ {enable | disable}%%  |  %%spantree pvst+compatibility {enable | disable}%%  |
|  %%bridge port {slot/port | agg_num} pvst+ {auto | enable | disable}%%  |  %%spantree pvst+compatibility {port <slot/port> | linkagg <linkagg1[-linkagg2]>} {enable | disable | auto}%%  |
===== VFC =====
^  6.4.2.R01 Command  ^  7.1.1.R01 Command  ^
|  %%new command%%  |  %%qos wred {wrp-id <1-4> | wrp-name <name>} [color {all | g | y | r} {min <%> | max <%> | pb <%> | gain <1-15>}] [admin-state {enable | disable}]%%  |
|  %%new command%%  |  %%no qos wred {wrp-id <2-4> | wrp-name <name>}%%  |
|  %%new command%%  |  %%show qos wred [wrp-id <1-4> | wrp-name <name>]%%  |
|  %%new command%%  |  %%show qos wred [wrp-id <1-4> | wrp-name <name>] detail [port <slot/port[-port]> | slot <slot> | linkagg <agg[-agg]>]%%  |
|  %%new command%%  |  %%qos qset {qsp-id <1-4> | qsp-name <name>} [wrp-id <1-4> | wpr-name <name>] [wred-admin {enable | disable}] [stats {enable | disable}]%%  |
|  %%new command%%  |  %%show qos qset [qsp-id <1-4> | qsp-name <name>]%%  |
|  %%new command%%  |  %%show qos qset [qsp-id <1-4> | qsp-name <name>] detail [port <slot/port[-port]> | slot <slot> | linkagg <agg[-agg]>]%%  |
|  %%new command%%  |  %%qos qsap {port <slot/port[-port]> | slot <slot> | linkagg <agg[-agg]>} [admin-state {enable | disable}]%%  |
|  %%new command%%  |  %%show qos qsap [port <slot/port[-port]> | slot <slot> | linkagg <agg[-agg]>]%%  |
|  %%new command%%  |  %%show qos qsap [port <slot/port[-port]> | slot <slot> | linkagg <agg[-agg]>] detail%%  |
|  %%new command%%  |  %%qos qsi {port <slot/port[-port]> | slot <slot> | linkagg <agg[-agg]>} [qsp-id <1-4> | qsp-name <name>] [stats {enable | disable}] [wred-admin {enable | disable}]%%  |
|  %%new command%%  |  %%no qos qsi [port <slot/port[-port]> | slot <slot>} | linkagg <agg[-agg]>]%%  |
|  %%new command%%  |  %%clear qos qsap [port <slot/port[-port]> | slot <slot> | linkagg <agg[-agg]>] stats [qp-id <1-8>]%%  |
|  %%new command%%  |  %%show qos qsap [port <slot/port[-port]> | slot <slot> | linkagg <agg[-agg]>] stats [qp-id <1-8>]%%  |
===== VLAN MANAGER =====
^  6.4.2.R01 Command  ^  7.1.1.R01 Command  ^
|  %%vlan <vid1[-vid2]> 802.1q {<slot/port1[-port2]>  | <aggregate_id>} %%  |  %%vlan <vid1[-vid2]> members {port <slot/port1[-port2]> | linkagg <agg1[-agg2]>} tagged%%  |
|  %%no vlan <vid1[-vid2]> 802.1q {<slot/port[-port2]> | <aggregate_id>} %%  |  %%no vlan <vid1[-vid2]> members {port <slot/port1[-port2]> | linkagg <agg1[-agg2]>}%%  |
|  %%vlan <vid> port default {<slot/port> | <link_agg>} %%  |  %%vlan <vid> members {port <slot/port1[-port2]> | linkagg <agg1[-agg2]>} untagged%%  |
|  %%no vlan <vid1[-vid2]> port default {<slot/port> | <link_agg>} %%  |  %%no vlan <vid1[-vid2]> members {port <slot/port1[-port2]> | linkagg <agg1[-agg2]>}%%  |
|  %%vlan <vid1[-vid2]> [enable | disable]%%  |  %%vlan <vid1[-vid2]> [admin-state {enable | disable}]%%  |
|  %%no vlan vid mac mac_address %%  |  %%removed%%  |
|  %%no vlan vid mac range low_mac_address %%  |  %%removed%%  |
|  %%no vlan vid ip ip_address [subnet_mask] %%  |  %%removed%%  |
|  %%no vlan vid ipx ipx_net %%  |  %%removed%%  |
|  %%no vlan vid protocol {ip-e2 | ip-snap | ipx-e2 | ipx-nov | ipx-llc | ipx-snap | decnet | appletalk | ethertype type | dsapssap dsap/ssap | snap snaptype} %%  |  %%removed%%  |
|  %%no vlan vid port slot/port %%  |  %%removed%%  |
|  %%no vlan port mobile slot/port %%  |  %%removed%%  |
|  %%no vlan vid  router ipx %%  |  %%removed%%  |
|  %%show vlan [<vid1[-vid2]>] [port [<slot/port> | <link_agg>]]%%  |  %%show vlan [<vid1[-vid2]>] [members [port <slot/port1[-port2]> | linkagg <agg1[-agg2]>]]%%  |
|  %%show vlan router mac-status %%  |  %%removed%%  |
|  %%vlan 802.1q slot/port frame type {all | tagged}%%  |  %%removed%%  |
|  %%show 802.1q {slot/port | aggregate_id}%%  |  %%removed%%  |
|  %%show vlan gvrp [vid1[-vid2]]%%  |  %%removed%%  |
|  %%show vlan ipmvlan [ipmvlan-id1[-ipmvlan-id2]]%%  |  %%removed%%  |
|  %%vlan vid1[-vid2] {1x1 | flat} stp {enable | disable}%%  |  %%removed%%  |
|  %%vlan <vid1[-vid2]> stp {enable | disable}%%  |  %%spantree vlan <vid1[-vid2]> admin-state {enable | disable}%%  |
|  %%vlan vid1[-vid2] mobile-tag {enable | disable}%%  |  %%removed%%  |
|  %%vlan vid router ipx ipx_net [rip | active | inactive | triggered] [e2 | llc | snap | novell] [timeticks ticks]%%  |  %%removed%%  |
===== VLAN STACKING =====
^  6.4.2.R01 Command  ^  7.1.1.R01 Command  ^
|  %%ethernet-service {svlan | ipmvlan | management-vlan} svid1[-svid2] [enable | disable] [[1x1 | flat] stp {enable | disable}] [name description]%%  |  %%ethernet-service svlan <svlan1[-svlan2]> [admin-state {enable | disable}] [name <description>] [mtu-ip <size>]%%  |
|  %%no ethernet-service {svlan | ipmvlan | management-vlan} svid1[-svid2]%%  |  %%no ethernet-service svlan <svlan1[-svlan2]>%%  |
|  %%ethernet-service service-name service-name {svlan | ipmvlan} svid%%  |  %%ethernet-service service-name <service-name> svlan <svlan>%%  |
|  %%no ethernet-service service-name service-name {svlan | ipmvlan} svid%%  |  %%no ethernet-service service-name <service-name> svlan <svlan>%%  |
|  %%ethernet-service svlan svid1[-svid2] nni {slot/port1[-port2] | linkagg agg_num} [stp | erp]%%  |  %%ethernet-service svlan <svlan1[-svlan2]> nni {port <slot/port1[-port2]> | linkagg <linkagg1[-linkagg2]>}%%  |
|  %%no ethernet-service svlan svid1[-svid2] nni {slot/port1[-port2] | linkagg agg_num}%%  |  %%no ethernet-service svlan <svlan1[-svlan2]> nni {port <slot/port1[-port2]> | linkagg <linkagg1[-linkagg2]>}%%  |
|  %%ethernet-service nni {slot/port1[-port2] | agg_num} [tpid value] [{stp | gvrp} legacy-bpdu {enable | disable}] [transparent-bridging {enable | disable}]%%  |  %%ethernet-service nni {port <slot/port1[-port2]> | linkagg <linkagg1[-linkagg2]>} [tpid <value>] [{stp | mvrp} legacy-bpdu {enable | disable}]%%  |
|  %%new command%%  |  %%no ethernet-service nni {port <slot/port1[-port2]> | linkagg <linkagg1[-linkagg2]>}%%  |
|  %%ethernet-service sap sapid service-name service-name%%  |  %%no change%%  |
|  %%no ethernet-service sap sapid%%  |  %%no change%%  |
|  %%ethernet-service sap sapid uni {slot/port1[-port2] | linkagg agg_num}%%  |  %%ethernet-service sap <sapid> uni {port <slot/port1[-port2]> | linkagg <linkagg1[-linkagg2]>}%%  |
|  %%ethernet-service sap sapid no uni {slot/port1[-port2] | linkagg agg_num}%%  |  %%no ethernet-service sap <sapid> uni {port <slot/port1[-port2]> | linkagg <linkagg1-[linkagg2]>}%%  |
|  %%ethernet-service sap sapid cvlan {all | cvid | cvid1-cvid2 | untagged}%%  |  %%no change%%  |
|  %%ethernet-service sap sapid no cvlan {all | cvid | cvid1-cvid2 | untagged}%%  |  %%no ethernet-service sap <sapid> cvlan {all | <cvlan1[-cvlan2]> | untagged}%%  |
|  %%ethernet-service sap-profile sap-profile-name%%  |  %%no change%%  |
|  %%no ethernet-service sap-profile sap-profile-name%%  |  %%no change%%  |
|  %%ethernet-service sap sapid sap-profile sap-profile-name%%  |  %%no change%%  |
|  %%ethernet-service {svlan | ipmvlan} svid1[-svid2] source-learning {enable| disable}%%  |  %%removed: use 'mac-learning vlan <vid[-vid]> {enable | disable}'%%  |
|  %%ethernet-service uni-profile uni-profile-name [l2-protocol {stp | 802.1x | 802.1ab | 802.3ad | gvrp | amap} {peer | discard | tunnel}%%  |  %%ethernet-service uni-profile uni-profile-name [l2-protocol {stp | 802.1x | 802.1ab | 802.3ad | amap | mvrp} {peer | discard | tunnel}%%  |
|  %%no ethernet-service uni-profile uni-profile-name%%  |  %%no change%%  |
|  %%ethernet-service uni {slot/port1[-port2] | agg_num} uni-profile uni-profile-name%%  |  %%ethernet-service uni {port <slot/port1[-port2]> | linkagg <linkagg1[-linkagg2]>} uni-profile <uni-profile-name>%%  |
|  %%show ethernet-service mode%%  |  %%removed%%  |
|  %%show ethernet-services vlan [svid1-[svid2]]%%  |  %%no change%%  |
|  %%show ethernet-service [service-name service-name | svlan svid]%%  |  %%no change%%  |
|  %%show ethernet-services sap [sapid]%%  |  %%no change%%  |
|  %%show ethernet-services port {slot/port | linkagg agg_num}%%  |  %%show ethernet-services {port <slot/port> | linkagg <linkagg>}%%  |
|  %%show ethernet-services nni [slot/port | linkagg agg_num]%%  |  %%show ethernet-services nni [port <slot/port> | linkagg <linkagg>]%%  |
|  %%show ethernet-services uni [slot/port | linkagg agg_num]%%  |  %%show ethernet-services uni [port <slot/port> | linkagg <linkagg>]%%  |
|  %%show ethernet-service uni-profile [uni-profile-name]%%  |  %%no change%%  |
|  %%show ethernet-service sap-profile sap-profile-name%%  |  %%no change%%  |
===== VRRP =====
^  6.4.2.R01 Command  ^  7.1.1.R01 Command  ^
|  %%Optional VRF Prefix on all cmds [vrf {vrf_name}]%%  |  %%Optional VRF Prefix on all cmds [vrf {vrf_name}]%%  |
|  %%vrrp vrid vlan_id [enable | disable | on | off] [priority priority] [preempt | no preempt] [[advertising] interval seconds]%%  |  %%no change%%  |
|  %%no vrrp vrid vlan_id%%  |  %%no change%%  |
|  %%vrrp vrid vlan_id address ip_address%%  |  %%no change%%  |
|  %%vrrp vrid vlan_id no address ip_address%%  |  %%no change%%  |
|  %%vrrp track track_id [enable | disable] [priority value] [ipv4-interface name | ipv6-interface name | port slot/port | address address]%%  |  %%no change%%  |
|  %%no vrrp track track_id%%  |  %%no change%%  |
|  %%vrrp vrid vlan_id track-association track_id%%  |  %%no change%%  |
|  %%vrrp vrid vlan_id no track-association track_id%%  |  %%no change%%  |
|  %%vrrp trap%%  |  %%no change%%  |
|  %%vrrp trap <id> address <ip_address> bfd-std {enable | disable}%%  |  %%vrrp trap <id> address <ip_address> bfd-state {enable | disable}%%  |
|  %%no vrrp trap%%  |  %%no change%%  |
|  %%vrrp delay seconds%%  |  %%no change%%  |
|  %%vrrp3 vrid vlan_id [enable | disable | on | off] [priority priority] [preempt | no preempt][accept | no accept] [[advertising] interval centiseconds]%%  |  %%no change%%  |
|  %%no vrrp3 vrid vlan_id%%  |  %%no change%%  |
|  %%vrrp3 vrid vlan_id address ipv6_address%%  |  %%no change%%  |
|  %%vrrp3 vrid vlan_id no address ipv6_address%%  |  %%no change%%  |
|  %%vrrp3 trap%%  |  %%no change%%  |
|  %%no vrrp3 trap%%  |  %%no change%%  |
|  %%vrrp3 vrid vlan_id track-association track_id%%  |  %%no change%%  |
|  %%vrrp3 vrid vlan_id no track-association track_id%%  |  %%no change%%  |
|  %%show vrrp [vrid]%%  |  %%no change%%  |
|  %%show vrrp [vrid] statistics%%  |  %%no change%%  |
|  %%show vrrp track [track_id]%%  |  %%no change%%  |
|  %%show vrrp [vrid] track-association [track_id]%%  |  %%no change%%  |
|  %%show vrrp3 [vrid]%%  |  %%no change%%  |
|  %%show vrrp3 [vrid] statistics%%  |  %%no change%%  |
|  %%show vrrp3 [vrid] track-association [track_id]%%  |  %%no change%%  |