Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- stellar-wireless-wpa3-sae-raspberry-pi [2019/05/20 20:40] – [Compiling / Patching hostap/wpa_supplicant] benny
+++ stellar-wireless-wpa3-sae-raspberry-pi [2024/06/09 10:29] (aktuell) – Externe Bearbeitung 127.0.0.1
@@ Zeile 3: / Zeile 3: @@
 Connecting with WPA3-Personal (SAE/PMF) on the Raspberry Pi 3 B+ via on-board wireless NIC is not exactly straight forward, but it works. On this page I'll document what needs to be done, to get it to work.
-**Equipement & Access Point used:**
+**Equipment & Access Point used:**
   * [[https://www.al-enterprise.com/en/products/wlan/omniaccess-stellar-access-point-1201|Alcatel-Lucent Enterprise OmniAccess Stellar AP1201]]
   * AWOS v3.0.6.20
@@ Zeile 9: / Zeile 9: @@
   * Raspberry Pi Model 3 B+
 {{ :omniaccess-stellar-ap1201.png?direct&400 |}}
+<WRAP center round tip 60%>
+If you'd like to know how to connect a Windows 10 laptop via WPA3-Personal, [[stellar-wireless-win10-windows-10-wpa3-sae|you may want to review this article]]!
+</WRAP>
 Connecting to SSID "ov44b39" mandates MFP/PMF (as SAE-only), as you can tell from following **Wifi Explorer** screenshot.