Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- nagios [2015/04/10 11:36] – michael-neesen
+++ nagios [2024/06/09 10:29] (aktuell) – Externe Bearbeitung 127.0.0.1
@@ Zeile 32: / Zeile 32: @@
   * Port Status
+{{:nagios.jpg?1261|}}
+Example of Nagios Core network monitoring with OmniSwitch- and OmniAccess-devices.
 ===== Ping =====
@@ Zeile 79: / Zeile 81: @@
 </code>
 The general service settings are the same used for the uptime monitoring. However, the OID tree is used to monitor the port status. The last four digits define the port, which is 1023 - Port 23 in the first switch of a chassis. The alternative is to use the object name. That would be ifOperStatus.1023. How to convert the object name to OID and reverse is explained in this [[umwandlung_von_mib_zu_oid_bzw._oid_zu_mib_ueber_die_aos_cli|article]]
-In addition, notifications are enabled for this check. The contact nagiosadmin is notified 24 hours a day, 7 days a week when the status change to warning or critical and even though the status change to resolved. MIB translations can be found on the dokuwiki and also in the support web.//
+In addition, notifications are enabled for this check. The contact nagiosadmin is notified 24 hours a day, 7 days a week when the status change to warning or critical and even though the status change to resolved. MIB translations can be found on the dokuwiki and also in the support web. \\
-Furthermore, passwords can be defined in the nagios config file resource.cfg. User variables are used to enable changes of recurring figures. They can be changed in a single point by using this file. In the example, the -A option would be e.g. $USERX$.//
+Furthermore, passwords can be defined in the nagios config file resource.cfg. User variables are used to enable changes of recurring figures. They can be changed in a single point by using this file. In the example, the -A option would be e.g. $USERX$. \\
 Other variables are predefined. The host address can be defined in the host definition. When the host address is needed in services for this host, $HOSTADDRESS$ inserts the IP-Address.