Benutzer-Werkzeuge

Webseiten-Werkzeuge


ap1101-automatisierung

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

Link zu dieser Vergleichsansicht

ap1101-automatisierung [2017/05/04 17:49]
benny angelegt
ap1101-automatisierung [2017/05/04 20:47] (aktuell)
benny
Zeile 1: Zeile 1:
 ====== AP1101 Automatisierung ====== ====== AP1101 Automatisierung ======
 +
 +===== AP =====
 +  * DHCP Server (zwingend)
 +  * HTTPS Server (optional) ​
 +  * HTTP Server (zwingend)
 +  * TFTP Server (zwingend)
 +
 +==== dhcpd.conf (isc-dhcp-server) ====
 +
 +<​code>​
 +#
 +# Classify stellar Wireless AP as HANAP
 +#
 + 
 +class "​HANAP"​ {
 +  match if substring (option vendor-class-identifier,​ 0, 4) = "​HAP.";​
 +}
 + 
 +subnet 192.168.10.0 netmask 255.255.255.0 {
 +  option routers 192.168.10.1;​
 +  option broadcast-address 192.168.10.255;​
 +  option domain-name-servers 192.168.10.1;​
 +  option domain-name "​vlan10.home";​
 +  option ntp-servers 192.168.10.1;​
 +  default-lease-time 6000;
 +  max-lease-time 72000;
 +  # Pool for HANAP
 +  pool {
 +       allow members of "​HANAP";​
 +       range 192.168.10.10 192.168.10.20;​
 +       # Option 66
 +       ​option tftp-server-name "​192.168.10.1";​
 +       # Option 67 (instruction file to download via tftp)
 +       ​option bootfile-name "​hap_instruction.ini";​
 +  }
 +  pool {
 +       range 192.168.10.21 192.168.10.50;​
 +       allow unknown-clients;​
 +  }
 +}
 +</​code>​
 +
 +Instruction Datei muss via DHCP (Offer) Option 67 angeflogen kommen. **Die Namen der Dateien können nicht geändert werden!**
 +In Option 66 muss der Server stehen (IP für TFTP).
 +
 +==== hap_instruction.ini ====
 +<​code>​
 +imgdesc:"​http://​192.168.10.1/​oaw/​hap_imgdesc.ini"​
 +imgurlhead:"​http://​192.168.10.1/​oaw/​img/"​
 +conf:"​http://​192.168.10.1/​oaw/​hap_conf.ini"​
 +</​code>​
 +(conf: kann auch HTTPS sein!)
 +
 +==== hap_imgdesc.ini ====
 +<​code>​
 +config model '​AP1101'​
 +    option version '​2.1.0.110'​
 +    option filename '​AOS-WNG-2.1.0.110.bin'​
 +    option md5 '​6f92c397067484ff5075484c24c529c5'​
 +</​code>​
 +
 +==== hap_conf.ini ====
 +<​code>​
 +config ap
 +    option countrycode '​DE'​
 +    option password '​blubbla123'​ <- Needs to be unencrypted,​ this is for "​Administrator"​ WebGUI password
 + 
 +config wifi-iface "​Markt"​
 +    option ssid '​Markt' ​
 +    option key '​vollsicher'​
 +    option encryption '​psk-mixed+tkip+aes'​
 +    option network_type '​employee'​
 +    option network '​wan'​
 + 
 +config wifi-iface "​Scanner"​
 +    option ssid '​Scanner' ​
 +    option key '​vollsicher'​
 +    option encryption '​psk-mixed+tkip+aes'​
 +    option network_type '​employee'​
 +    option network '​wan'​
 + 
 +config wifi-iface "​FreeWIFI"​
 +    option ssid '​FreeWIFI' ​
 +    option key '​vollsicher'​
 +    option encryption '​psk-mixed+tkip+aes'​
 +    option network_type '​employee'​
 +    option network '​wan'​
 +</​code>​
 +
 +===== Switch =====
 +(out of scope für den Moment) ​
  
 <WRAP center round important 60%> <WRAP center round important 60%>
Zeile 7: Zeile 98:
   * Prüfen welches AOS-WNG Release   * Prüfen welches AOS-WNG Release
   * Konfiguration   * Konfiguration
-  * Update des AOS-WNG? +  * Update des AOS-WNG? ​=> ja, aber nur 1x 
-  * DHCP, HTTPS, TFTP?+  * DHCP, HTTP(S), TFTP? => yep
  
 OmniSwitch Modelle bzgl. die Vendor-Class-Identifier unterstützt von OXO: OmniSwitch Modelle bzgl. die Vendor-Class-Identifier unterstützt von OXO:
Zeile 78: Zeile 169:
 webview wlan cluster-virtual-ip 192.168.92.134 webview wlan cluster-virtual-ip 192.168.92.134
 </​code>​ </​code>​
- 
- 
-===== AP ===== 
-  * DHCP server (mandatory) 
-  * HTTPS file server (mandatory) ​ 
-  * HTTP file server (mandatory) 
- 
-Via HTTPS, URL path https://<​OXO_IP>/​securcfg/​ 
-Via HTTP, URL path http://<​OXO_IP>/​tpcfg/​ 
- 
-Instruction Datei muss via DHCP Offer option 67 angeflogen kommen. Die Namen können nicht geändert werden! 
-In Option 66 muss der Server stehen (wird dann wohl TFTP machen danach). 
- 
-hap_instruction.ini 
-<​code>​ 
-imgdesc:"​http://​192.168.92.246/​hap_imgdesc.ini"​ 
-imgurlhead:"​http://​192.168.92.246/​hpimages/"​ 
-conf:"​https://​192.168.92.246/​hap_conf.ini"​ 
-</​code>​ 
- 
-hap_instruction.ini (Benny) 
-<​code>​ 
-imgdesc:"​http://​192.168.0.177/​oaw/​hap_imgdesc.ini"​ 
-imgurlhead:"​http://​192.168.0.177/​oaw/​img/"​ 
-conf:"​http://​192.168.0.177/​oaw/​hap_conf.ini"​ 
-</​code>​ 
-(conf: kann auch HTTPS sein!) 
- 
-hap_conf.ini 
-<​code>​ 
-config ap 
-    option countrycode '​US'​ 
-    option password '​123456'​ 
-    option clustervip '​192.168.92.134’ 
- 
-config wifi-iface "​staff"​ 
-    option ssid '​staff_ssid' ​ 
-    option key '​staff_12345678' ​ 
-    option network '​vlan1'​ 
- 
-config wifi-iface "​voice"​ 
-    option ssid '​voice_ssid' ​ 
-    option key '​voice_87654321' ​ 
-    option network '​vlan3'​ 
- 
-config wifi-iface "​guest"​ 
-    option ssid '​guest_ssid' ​ 
-    option key ‘guest_23334353’ 
-    option network '​vlan1'​ 
-</​code>​ 
- 
-hap_conf.ini (Benny) 
-<​code>​ 
-config ap 
-    option countrycode '​DE'​ 
-    option password '​123456'​ 
-    option clustervip '​192.168.10.200’ 
- 
-config wifi-iface "​staff"​ 
-    option ssid '​staff_ssid' ​ 
-    option key '​wpakey12345' ​ 
-    option network '​vlan11'​ 
-</​code>​ 
- 
-hap_imgdesc.ini 
-<​code>​ 
-config model '​AP1101'​ 
-    option version '​2.1.1'​ 
-    option filename '​hos-r21-sysupgrade.bin' ​ 
-    option md5 '​1234567890'​ 
-</​code>​ 
- 
-<​code>​ 
-pi@watchtux:/​srv/​tftp $ md5sum OAW-AP1101_3.0.0.39.bin ​ 
-f711848f4c8a9b1352400cdffd96ef29 ​ OAW-AP1101_3.0.0.39.bin 
-</​code>​ 
- 
-hap_imgdesc.ini (Benny) 
-<​code>​ 
-config model '​AP1101'​ 
-    option version '​3.0.0.39'​ 
-    option filename '​OAW-AP1101_3.0.0.39.bin' ​ 
-    option md5 '​f711848f4c8a9b1352400cdffd96ef29'​ 
-</​code>​ 
- 
ap1101-automatisierung.txt · Zuletzt geändert: 2017/05/04 20:47 von benny