DokuWiki

Benutzer-Werkzeuge

Webseiten-Werkzeuge

Zuletzt angesehen:
mc-lag_zu_virtual-chassis_migration
no way to compare when less than two revisions

Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.


—mc-lag_zu_virtual-chassis_migration [2014/06/18 20:46] (aktuell) – angelegt benny
Zeile 1: Zeile 1:
 +====== Migration von MC-LAG zu Virtual-Chassis ======
  
 +{{::a-titelbild.png?nolink|}}
 +
 +In diesem Beitrag beschreiben wir die Migration von Alcatel-Lucent OmniSwitch MC-LAG zum Virtual-Chassis. Nach unseren Erfahrungen werden für diesen Vorgang (Neustart der Geräte) **weniger als 5 Minuten** benötigt. Eine ausführliche Lektüre dieser Seite, ist aber die Grundvoraussetzung!
 +
 +**Bitte prüfen Sie die Konfiguration sorgfältig bevor Sie die Systeme neustarten!**
 +
 +===== Voraussetzungen =====
 +Wir nutzen VIM um viele, sonst fehleranfällige, Änderungen der Konfiguration zu automatisieren.
 +
 +VIM ist ein großartiges Programm und sollte auf keinem Rechner fehlen.
 +  * Download für MacOSX: http://code.google.com/p/macvim/
 +  * Download für Windows: http://www.vim.org/download.php#pc
 +  * Download für Linux: http://www.vim.org/download.php#unix
 +
 +Damit VIM beim "Suchen & Ersetzen" die Zeilen farbig markiert, ist folgende Einstellung sinnvoll:
 +<code>
 +:set hlsearch
 +</code>
 +
 +  * Auf dem OmniSwitch wird die "Advanced"-Lizenz benötigt um das "Virtual Chassis" einsetzen zu können.
 +  * Bitte beachten Sie die u-boot / AOS-Abhängigkeiten! Details dazu stehen in den "Upgrade Instructions".
 +
 +===== Vergleich von MC-LAG mit Virtual-Chassis =====
 +
 +^  MC-LAG  ^  Virtual-Chassis  ^
 +|  Verfügbar seit AOS 7.1.1.R01  |  Verfügbar seit AOS 7.3.1.R01  |  
 +|  L2-Learning in Hardware\\ (MAC-Tabelle wird zwischen den Chassis synchronisiert)  |  L2-Learning in Hardware\\ (MAC-Tabelle wird zwischen den Chassis synchronisiert)  |  
 +|  Unabhängige Konfiguration mit separater Management-IP für jeden Switch  |  Konfiguration und Management des gesamten Virtual-Chassis erfolgt über eine IP-Adresse  |  
 +|  Unabhängige Bridge-IDs  |  **Eine** Bridge-ID  |  
 +|  Unabhängige Router  |  **Ein** Router  |  
 +|  Nur eingeschränkte IPv4-L3-Unterstützung über MC-LAGs (z.B. Dynamisches Routing)  |  Vollständige Unterstützung  |  
 +|  Keine IPv6-L3-Unterstützung über MC-LAGs (z.B. Gateway, Dynamisches Routing)  |  Vollständige Unterstützung  | 
 +|  Virtual Fabric Link (VFL), fehlertolerantes und hochperformantes Link-Aggregat  |  Identisch  |  
 +|  Limitiert auf zwei Chassis  |  Aktuell zwei Chassis, zukünftig sechs  |  
 +|  ISSU nur für das gleiche Chassis  |  ISSU über Chassis hinweg  |  
 +
 +==== Gründe um von MC-LAG zum Virtual-Chassis zu migrieren ====
 +
 +  * einfacheres Management
 +  * IPv6-fähig
 +  * IPv4/IPv6-Routing
 +
 +===== Planung der Arbeitsschritte =====
 +  * vcsetup.cfg's müssen vorbereitet werden
 +  * MC-LAG und System/Session:
 +    * "multi-chassis"-Zeilen müssen komplett aus der Konfiguration entfernt werden
 +    * "session prompt" vom zweiten Core entfernen
 +    * "system name", "system location", "system contact" & "ip interface" vom zweiten Core entfernen
 +  * Link-Aggregation:
 +    * "linkagg range" Zeile muss aus der Konfiguration entfernt werden
 +    * linkagg {lacp|static} agg <agg> size <size> admin-state {enable|disable} "multi-chassis active" muss aus der Konfiguration entfernt werden
 +    * linkagg lacp agg <agg> "system-id xx:xx:xx:xx:xx:xx" muss aus der Konfiguration entfernt werden
 +    * linkagg {lacp|static} port "system-id xx:xx:xx:xx:xx:xx" muss aus der Konfiguration entfernt werden
 +    * linkagg {lacp|static} port "slot/port" zu "chassis/slot/port" konvertieren
 +  * VLAN:
 +    * multi-chassis vip-vlan konvertieren in normales vlan
 +    * VLAN-Zuordnung von Ports tagged/untagged "slot/port" zu "chassis/slot/port" konvertieren
 +  * IP-Interface:
 +    * Entweder bisherige virtuelle Adresse (vip-address) als VRRP anlegen **ODER**
 +    * IP-Interface mit "vip-address" betreiben (bisherige physikalische IP überschreiben)
 +    * (IP Interfaces aus Chassis 2 komplett löschen)
 +  * LLDP:
 +    * "slot/port" zu "chassis/slot/port" konvertieren
 +  * Weitere Konfigurationen
 +    * Sind in der Konfiguration noch Kommandos enthalten die hier nicht behandelt werden?
 +
 +===== Durchführung der vorbereitenden Arbeitsschritte =====
 +
 +Wenn nicht anders angegeben, müssen die VIM-Kommandos jeweils einmal für "Chassis 1" und "Chassis 2"-Konfiguration durchgeführt werden.
 +
 +==== Konvertieren und entfernen der Multi-Chassis & VF-Link Konfiguration ====
 +
 +<WRAP center round important 60%>
 +
 +An dieser Stelle wird die Multi-Chassis Konfiguration entfernt, vorher sollten natürlich die Parameter in eine jeweils neue vcsetup.cfg übernommen werden. Wie diese Dateien aussehen müssen, steht u.a. hier: [[nxo_dc_vrd|NextiraOne - Data Center Validated Reference Design]]
 +
 +</WRAP>
 +
 +
 +Um die Konvertierung möglichst einfach zu gestalten, helfen die folgenden VIM-Kommandos beim Erstellen der zwei vcsetup.cfg's:
 +<WRAP center round tip 60%>
 +
 +Ein hinter das "g" (global) angestelltes "c" (confirmation) fordert für jede Fundstelle vor Ersetzung eine Bestätigung ein. Wer also nicht jede Zeile bestätigen möchte, entfernt das "c".
 +
 +</WRAP>
 +
 +<code>
 +Chassis 1:
 +:%s/^multi-chassis\ chassis-id\ \(\d\+\)$/virtual-chassis chassis-id \1 configured-chassis-id \1/gc
 +:%s/^multi-chassis\ vf-link\ create$/virtual-chassis chassis-id 1 vf-link 0 create/gc
 +:%s/^multi-chassis\ vf-link\ member-port\ \(\d\+\/\S*\)$/virtual-chassis chassis-id 1 vf-link 0 member-port 1\/\1/gc
 +:%s/^multi-chassis\ chassis-group\ \(\d\+\)$/virtual-chassis chassis-id 1 chassis-group \1/gc
 +
 +Chassis 2:
 +:%s/^multi-chassis\ chassis-id\ \(\d\+\)$/virtual-chassis chassis-id \1 configured-chassis-id \1/gc
 +:%s/^multi-chassis\ vf-link\ create$/virtual-chassis chassis-id 2 vf-link 0 create/gc
 +:%s/^multi-chassis\ vf-link\ member-port\ \(\d\+\/\S*\)$/virtual-chassis chassis-id 2 vf-link 0 member-port 2\/\1/gc
 +:%s/^multi-chassis\ chassis-group\ \(\d\+\)$/virtual-chassis chassis-id 2 chassis-group \1/gc
 +</code>
 +
 +{{::mclag-migration-bild8.png?nolink|}}
 +
 +**Wer die Zeilen kopiert oder manuell die Dateien angelegt hat, kann nun die Zeilen löschen:**\\
 +(Löscht beide Varianten, multi-chassis und konvertierte virtual-chassis Kommandos)
 +<code>
 +:g/^\(multi\|virtual\)-chassis\ \(cha\|vf-\).*$/d
 +</code>
 +
 +==== Entfernen der "linkagg range" aus der Konfiguration ====
 +
 +<code>
 +:g/^linkagg\ range.*$/d 
 +</code>
 +
 +==== "multi-chassis active" aus den Link-Aggregationen entfernen ====
 +
 +<code>
 +:%s/\ multi-chassis\ active.*$//gc
 +</code>
 +
 +{{:mclag-migration-bild6.png?nolink|}}
 +
 +==== "system-id xx:xx:xx:xx:xx:xx"-Zeilen aus Link-Aggregation Port und Aggs entfernen ====
 +
 +<code>
 +:g/^linkagg\ \(.*system-id\).*$/d
 +</code>
 +
 +==== Link-Aggregations - Konfiguration von "slot/port" zu "chassis/slot/port" konvertieren ====
 +
 +<code>
 +Chassis 1:
 +:%s/^linkagg\ \(static\|lacp\)\ port\ \(\d\+\/\S*\)/linkagg \1 port 1\/\2/gc
 +
 +Chassis 2:
 +:%s/^linkagg\ \(static\|lacp\)\ port\ \(\d\+\/\S*\)/linkagg \1 port 2\/\2/gc
 +</code>
 +
 +{{:mclag-migration-bild7.png?nolink|}}
 +
 +==== "multi-chassis vip-vlan" ersetzen durch normales "vlan" ====
 +
 +<code>
 +:%s/^multi-chassis\ vip-vlan/vlan/gc
 +</code>
 +
 +==== VLAN Portzuordnung von "slot/port" zu "chassis/slot/port" konvertieren ====
 +
 +<code>
 +Chassis 1:
 +:%s/^vlan\ \(\d\+\)\ members\ port\ \(\d\+\/\S*\)/vlan \1 members port 1\/\2/gc
 +
 +Chassis 2:
 +:%s/^vlan\ \(\d\+\)\ members\ port\ \(\d\+\/\S*\)/vlan \1 members port 2\/\2/gc
 +</code>
 +
 +==== IP-Interfaces automatisiert konvertieren ====
 +
 +Nachdem wir die beiden MC-LAG Nodes zu einem Virtual Chassis migriert haben, sollen Server/Clients die gleichen Gateways wie zuvor nutzen können - daher konvertieren wir im Folgenden die IP-Interfaces von bisherigen physikalischen IPs auf Ihre "VIP-Address" um.
 +
 +(Soll dies nicht so gemacht werden, muss dieser Schritt natürlich manuell nach eigenem Wunsch durchgeführt werden.)
 +<code>
 +Chassis 1:
 +:%s/^ip\ interface\ \(\".*\"\)\ address \(\d\+\.\d\+\.\d\+\.\d\+\)\ mask\ \(\d\+\.\d\+\.\d\+\.\d\+\)\ vip-address\ \(\d\+\.\d\+\.\d\+\.\d\+\)/ip interface \1 address \4 mask \3/gc 
 +
 +Chassis 2:
 +:g/^ip\ interface.*$/d 
 +</code>
 +
 +{{::mclag-migration-bild9.png?nolink|}}
 +
 +==== LLDP-Konfiguration von "slot/port" zu "chassis/slot/port" konvertieren ====
 +
 +<code>
 +Chassis 1:
 +:%s/^lldp\ \(nearest-bridge\|non-tpmr\|nearest-customer\)\ port \(\d\+\/\S*\)/lldp \1 port 1\/\2/gc 
 +
 +Chassis 2:
 +:%s/^lldp\ \(nearest-bridge\|non-tpmr\|nearest-customer\)\ port \(\d\+\/\S*\)/lldp \1 port 2\/\2/gc
 +</code>
 +
 +{{:mclag-migration-bild5.png?nolink|}}
 +
 +==== Entfernung überflüssiger Parameter ====
 +
 +**Aus der Konfiguration von __Chassis 2__ sollten noch einige Parameter entfernt werden die sonst beim Zusammenführen (merge) der beiden Dateien zu fehlender Übersicht führen können:**
 +<code>
 +:g/^system\ \(name\|contact\|location\)/d 
 +:g/^session\ prompt/d
 +</code>
 +
 +**Beide Dateien mit ":wq" abspeichern und schließen.**
 +
 +==== Erstellen der vcboot.cfg für das Virtual Chassis ====
 +
 +**Im folgenden sieht man wie die "primäre" Konfiguration wieder geöffent wurde:**
 +
 +{{:mclag-migration-bild1.png?nolink|}}
 +
 +**Wir holen uns nun über das folgende Kommando die zweite Datei inkl. farblich markierten Unterschieden dazu:**
 +
 +<code>
 +:vert diffsplit CORE02.cfg
 +</code>
 +
 +{{:mclag-migration-bild2.png?nolink|}}
 +
 +Über die Tastenkombination STRG+WW kann zwischen den Fenstern gewechselt werden.
 +Mit der Tastenkombination Shift (Hochstelltaste)+V können wir Zeilenweise über die Cursortasten markieren und mit "d" die markierten Zeilen ausschneiden.
 +
 +{{:mclag-migration-bild3.png?nolink|}}
 +
 +Die ausgeschnittenen Zeilen fügen wir (nach wechseln ins andere Fenster mit Strg+WW) mit "p" an der gewünschten Stelle in der Konfiguration ein. Dieser Schritt muss für VLAN-Portzuordnung, Link-Aggregation-Portzuordnung, LLDP-Portkonfiguration usw. durchgeführt werden.
 +
 +{{:mclag-migration-bild4.png?nolink|}}
 +
 +**Nachdem alle relevanten Inhalte in die Konfiguration kopiert wurden, diese mit dem folgenden Kommando abspeichern:**
 +<code>
 +:w vcboot.cfg
 +</code>
 +
 +===== Exemplarische Konfiguration =====
 +
 +==== MC-LAG Knoten 1 (CORE01) ====
 +
 +<file cfg CORE01.cfg>
 +!========================================!
 +! File: /flash/working/boot.cfg          !
 +!========================================!
 +! Chassis:
 +system name MC-Lag1
 +system contact myContact
 +system location "1. DC"
 +mac-retention admin-state enable
 +mac-retention dup-mac-trap admin-state enable
 +mac-retention timer 30
 +
 +! Configuration:
 +
 +! Capability Manager:
 +! Multi-Chassis:
 +multi-chassis chassis-id 1
 +multi-chassis vf-link create
 +multi-chassis vf-link member-port 1/1
 +multi-chassis vf-link member-port 1/20
 +multi-chassis chassis-group 9
 +
 +! Virtual Chassis Manager:
 +! Virtual Flow Control:
 +! Interface:
 +! Link Aggregate:
 +linkagg range local 0-47 peer 48-95 multi-chassis 96-127 
 +linkagg lacp agg 96 size 2 admin-state enable multi-chassis active
 +linkagg lacp agg 96 name "RACK01"
 +linkagg lacp agg 96 actor system-id 00:00:00:00:00:96
 +linkagg lacp agg 96 actor admin-key 96
 +linkagg lacp agg 97 size 2 admin-state enable multi-chassis active
 +linkagg lacp agg 97 name "RACK02"
 +linkagg lacp agg 97 actor system-id 00:00:00:00:00:97
 +linkagg lacp agg 97 actor admin-key 97
 +linkagg lacp agg 98 size 2 admin-state enable multi-chassis active
 +linkagg lacp agg 98 name "RACK03"
 +linkagg lacp agg 98 actor system-id 00:00:00:00:00:98
 +linkagg lacp agg 98 actor admin-key 98
 +linkagg lacp agg 99 size 2 admin-state enable multi-chassis active
 +linkagg lacp agg 99 name "RACK04"
 +linkagg lacp agg 99 actor system-id 00:00:00:00:00:99
 +linkagg lacp agg 99 actor admin-key 99
 +linkagg lacp agg 100 size 2 admin-state enable multi-chassis active
 +linkagg lacp agg 100 name "SW01"
 +linkagg lacp agg 100 actor system-id 00:00:00:00:01:00
 +linkagg lacp agg 100 actor admin-key 100
 +linkagg lacp agg 101 size 2 admin-state enable multi-chassis active
 +linkagg lacp agg 101 name "SW02"
 +linkagg lacp agg 101 actor system-id 00:00:00:00:01:01
 +linkagg lacp agg 101 actor admin-key 101
 +linkagg lacp agg 102 size 2 admin-state enable multi-chassis active
 +linkagg lacp agg 102 name "SW03"
 +linkagg lacp agg 102 actor system-id 00:00:00:00:01:02
 +linkagg lacp agg 102 actor admin-key 102
 +linkagg lacp agg 103 size 2 admin-state enable multi-chassis active
 +linkagg lacp agg 103 name "SW04"
 +linkagg lacp agg 103 actor system-id 00:00:00:00:01:03
 +linkagg lacp agg 103 actor admin-key 103
 +linkagg lacp agg 104 size 2 admin-state enable multi-chassis active
 +linkagg lacp agg 104 name "SW05"
 +linkagg lacp agg 104 actor system-id 00:00:00:00:01:04
 +linkagg lacp agg 104 actor admin-key 104
 +linkagg lacp agg 105 size 2 admin-state enable multi-chassis active
 +linkagg lacp agg 105 name "SW06"
 +linkagg lacp agg 105 actor system-id 00:00:00:00:01:05
 +linkagg lacp agg 105 actor admin-key 105
 +linkagg lacp agg 106 size 2 admin-state enable multi-chassis active
 +linkagg lacp agg 106 name "SW07"
 +linkagg lacp agg 106 actor system-id 00:00:00:00:01:06
 +linkagg lacp agg 106 actor admin-key 106
 +linkagg lacp port 1/2 actor admin-key 96
 +linkagg lacp port 1/2 actor system-id 00:00:00:00:00:96
 +linkagg lacp port 1/3 actor admin-key 97
 +linkagg lacp port 1/3 actor system-id 00:00:00:00:00:97
 +linkagg lacp port 1/4 actor admin-key 98
 +linkagg lacp port 1/4 actor system-id 00:00:00:00:00:98
 +linkagg lacp port 1/5 actor admin-key 99
 +linkagg lacp port 1/5 actor system-id 00:00:00:00:00:99
 +linkagg lacp port 1/6 actor admin-key 100
 +linkagg lacp port 1/6 actor system-id 00:00:00:00:01:00
 +linkagg lacp port 1/7 actor admin-key 101
 +linkagg lacp port 1/7 actor system-id 00:00:00:00:01:01
 +linkagg lacp port 1/8 actor admin-key 102
 +linkagg lacp port 1/8 actor system-id 00:00:00:00:01:02
 +linkagg lacp port 1/9 actor admin-key 103
 +linkagg lacp port 1/9 actor system-id 00:00:00:00:01:03
 +linkagg lacp port 1/10 actor admin-key 104
 +linkagg lacp port 1/10 actor system-id 00:00:00:00:01:04
 +linkagg lacp port 1/11 actor admin-key 105
 +linkagg lacp port 1/11 actor system-id 00:00:00:00:01:05
 +linkagg lacp port 1/12 actor admin-key 106
 +linkagg lacp port 1/12 actor system-id 00:00:00:00:01:06
 +
 +! VLAN:
 +vlan 1 admin-state enable
 +vlan 1 name "Mgmt"
 +multi-chassis vip-vlan 100 admin-state enable
 +multi-chassis vip-vlan 100 name "Server"
 +vlan 102-104 admin-state enable
 +vlan 102 name "Guest"
 +vlan 103 name "VoIP"
 +vlan 104 name "Build"
 +vlan 106 admin-state enable
 +vlan 106 name "Dev"
 +multi-chassis vip-vlan 110-113 admin-state enable
 +multi-chassis vip-vlan 110 name "Client1"
 +multi-chassis vip-vlan 111 name "Client2"
 +multi-chassis vip-vlan 112 name "Client3"
 +multi-chassis vip-vlan 113 name "Client4"
 +multi-chassis vip-vlan 150 admin-state enable
 +multi-chassis vip-vlan 150 name "VIP VLAN"
 +vlan 100 members linkagg 96-99 tagged
 +vlan 102 members linkagg 100-106 tagged
 +vlan 103 members linkagg 96-106 tagged
 +vlan 104 members linkagg 96-106 tagged
 +vlan 106 members linkagg 96-106 tagged
 +vlan 110 members linkagg 100-101 tagged
 +vlan 111 members linkagg 102-103 tagged
 +vlan 112 members linkagg 104-105 tagged
 +vlan 113 members linkagg 106 tagged
 +vlan 150 members linkagg 96-99 tagged
 +
 +! Spanning Tree:
 +spantree vlan 1 admin-state enable 
 +spantree vlan 100 admin-state enable 
 +spantree vlan 102 admin-state enable 
 +spantree vlan 103 admin-state enable 
 +spantree vlan 104 admin-state enable 
 +spantree vlan 106 admin-state enable 
 +spantree vlan 110 admin-state enable 
 +spantree vlan 111 admin-state enable 
 +spantree vlan 112 admin-state enable 
 +spantree vlan 113 admin-state enable 
 +spantree vlan 150 admin-state enable 
 +
 +! Bridging:
 +! Port Mirroring:
 +! Port Mapping:
 +! IP:
 +ip service port 21 admin-state enable
 +ip service port 22 admin-state enable
 +ip service port 23 admin-state enable
 +ip service port 80 admin-state enable
 +ip service port 123 admin-state enable
 +ip service port 443 admin-state enable
 +ip interface "Mgmt" address 192.168.130.197 mask 255.255.255.0 vlan 1 no forward ifindex 1
 +ip interface "Client1" address 10.2.140.197 mask 255.255.255.0 vip-address 10.2.140.1 vlan 110 ifindex 2
 +ip interface "Client2" address 10.2.141.197 mask 255.255.255.0 vip-address 10.2.141.1 vlan 111 ifindex 3
 +ip interface "Client3" address 10.2.142.197 mask 255.255.255.0 vip-address 10.2.142.1 vlan 112 ifindex 4
 +ip interface "Client4" address 10.2.143.197 mask 255.255.255.0 vip-address 10.2.143.1 vlan 113 ifindex 5
 +ip interface "Server" address 10.2.128.197 mask 255.255.255.0 vip-address 10.2.128.1 vlan 100 ifindex 6
 +ip interface "Transfer_Firewall" address 192.168.150.197 mask 255.255.255.0 vip-address 192.168.150.1 vlan 150 ifindex 7
 +
 +! IPv6:
 +! IPSec:
 +! IPMS:
 +! AAA:
 +aaa authentication console "local" 
 +aaa authentication ftp "local" 
 +aaa authentication http "local" 
 +aaa authentication snmp "local" 
 +aaa authentication ssh "local" 
 +
 +user password-size min 6
 +
 +! NTP:
 +ntp server 192.168.2.253
 +ntp client admin-state enable
 +
 +! QOS:
 +policy condition from_voip source vlan 103 
 +policy action set_dscp dscp 46 
 +policy rule prio_voip condition from_voip action set_dscp 
 +qos apply
 +
 +! Policy Manager:
 +! VLAN Stacking:
 +! ERP:
 +! MVRP:
 +! LLDP:
 +lldp nearest-bridge port 1/1-20 tlv management system-capabilities enable
 +lldp nearest-bridge port 1/1-20 tlv management system-description enable
 +lldp nearest-bridge port 1/1-20 tlv management system-name enable
 +lldp nearest-bridge port 1/1-20 tlv management port-description enable
 +lldp non-tpmr port 1/1-20 tlv management system-capabilities enable
 +lldp non-tpmr port 1/1-20 tlv management system-description enable
 +lldp non-tpmr port 1/1-20 tlv management system-name enable
 +lldp non-tpmr port 1/1-20 tlv management port-description enable
 +lldp nearest-customer port 1/1-20 tlv management system-capabilities enable
 +lldp nearest-customer port 1/1-20 tlv management system-description enable
 +lldp nearest-customer port 1/1-20 tlv management system-name enable
 +lldp nearest-customer port 1/1-20 tlv management port-description enable
 +lldp nearest-bridge port 1/1-20 tlv management management-address enable
 +lldp non-tpmr port 1/1-20 tlv management management-address enable
 +lldp nearest-customer port 1/1-20 tlv management management-address enable
 +
 +! UDLD:
 +! Server Load Balance:
 +! High Availability Vlan:
 +! Session Manager:
 +session cli timeout 30
 +session http timeout 30
 +session prompt default "CORE01 ->"
 +command-log enable
 +
 +! Web:
 +! Trap Manager:
 +snmp station 192.168.2.203 162 "snmpv3" v3 enable
 +
 +! Health Monitor:
 +! System Service:
 +swlog output socket 192.168.2.203
 +system timezone CET
 +
 +! SNMP:
 +snmp security authentication set
 +snmp community-map mode enable
 +snmp community-map "public" user "snmp" enable
 +
 +! BFD:
 +! IP Route Manager:
 +ip static-route 0.0.0.0/0 gateway 192.168.150.253 metric 1
 +
 +! VRRP:
 +! UDP Relay:
 +! RIP:
 +! OSPF:
 +! ISIS:
 +! IP Multicast:
 +! DVMRP:
 +! IPMR:
 +! RIPng:
 +! OSPF3:
 +! BGP:
 +! Netsec:
 +! Module:
 +! RDP:
 +! DA-UNP:
 +! DHL:
 +! Ethernet-OAM:
 +! SAA:
 +! SPB-ISIS:
 +! SVCMGR:
 +! LDP:
 +! EVB:
 +</file>
 +
 +==== Modifizierte Konfiguration MC-LAG Knoten 1 (CORE01) ====
 +
 +<file cfg modifiziert-CORE01.cfg>
 +!========================================!
 +! File: /flash/working/boot.cfg          !
 +!========================================!
 +! Chassis:
 +system name MC-Lag1
 +system contact myContact
 +system location "1. DC"
 +mac-retention admin-state enable
 +mac-retention dup-mac-trap admin-state enable
 +mac-retention timer 30
 +
 +! Configuration:
 +
 +! Capability Manager:
 +! Multi-Chassis:
 +
 +! Virtual Chassis Manager:
 +! Virtual Flow Control:
 +! Interface:
 +! Link Aggregate:
 +linkagg lacp agg 96 size 2 admin-state enable
 +linkagg lacp agg 96 name "RACK01"
 +linkagg lacp agg 96 actor admin-key 96
 +linkagg lacp agg 97 size 2 admin-state enable
 +linkagg lacp agg 97 name "RACK02"
 +linkagg lacp agg 97 actor admin-key 97
 +linkagg lacp agg 98 size 2 admin-state enable
 +linkagg lacp agg 98 name "RACK03"
 +linkagg lacp agg 98 actor admin-key 98
 +linkagg lacp agg 99 size 2 admin-state enable
 +linkagg lacp agg 99 name "RACK04"
 +linkagg lacp agg 99 actor admin-key 99
 +linkagg lacp agg 100 size 2 admin-state enable
 +linkagg lacp agg 100 name "SW01"
 +linkagg lacp agg 100 actor admin-key 100
 +linkagg lacp agg 101 size 2 admin-state enable
 +linkagg lacp agg 101 name "SW02"
 +linkagg lacp agg 101 actor admin-key 101
 +linkagg lacp agg 102 size 2 admin-state enable
 +linkagg lacp agg 102 name "SW03"
 +linkagg lacp agg 102 actor admin-key 102
 +linkagg lacp agg 103 size 2 admin-state enable
 +linkagg lacp agg 103 name "SW04"
 +linkagg lacp agg 103 actor admin-key 103
 +linkagg lacp agg 104 size 2 admin-state enable
 +linkagg lacp agg 104 name "SW05"
 +linkagg lacp agg 104 actor admin-key 104
 +linkagg lacp agg 105 size 2 admin-state enable
 +linkagg lacp agg 105 name "SW06"
 +linkagg lacp agg 105 actor admin-key 105
 +linkagg lacp agg 106 size 2 admin-state enable
 +linkagg lacp agg 106 name "SW07"
 +linkagg lacp agg 106 actor admin-key 106
 +linkagg lacp port 1/1/2 actor admin-key 96
 +linkagg lacp port 1/1/3 actor admin-key 97
 +linkagg lacp port 1/1/4 actor admin-key 98
 +linkagg lacp port 1/1/5 actor admin-key 99
 +linkagg lacp port 1/1/6 actor admin-key 100
 +linkagg lacp port 1/1/7 actor admin-key 101
 +linkagg lacp port 1/1/8 actor admin-key 102
 +linkagg lacp port 1/1/9 actor admin-key 103
 +linkagg lacp port 1/1/10 actor admin-key 104
 +linkagg lacp port 1/1/11 actor admin-key 105
 +linkagg lacp port 1/1/12 actor admin-key 106
 +
 +! VLAN:
 +vlan 1 admin-state enable
 +vlan 1 name "Mgmt"
 +vlan 100 admin-state enable
 +vlan 100 name "Server"
 +vlan 102-104 admin-state enable
 +vlan 102 name "Guest"
 +vlan 103 name "VoIP"
 +vlan 104 name "Build"
 +vlan 106 admin-state enable
 +vlan 106 name "Dev"
 +vlan 110-113 admin-state enable
 +vlan 110 name "Client1"
 +vlan 111 name "Client2"
 +vlan 112 name "Client3"
 +vlan 113 name "Client4"
 +vlan 150 admin-state enable
 +vlan 150 name "VIP VLAN"
 +vlan 100 members linkagg 96-99 tagged
 +vlan 102 members linkagg 100-106 tagged
 +vlan 103 members linkagg 96-106 tagged
 +vlan 104 members linkagg 96-106 tagged
 +vlan 106 members linkagg 96-106 tagged
 +vlan 110 members linkagg 100-101 tagged
 +vlan 111 members linkagg 102-103 tagged
 +vlan 112 members linkagg 104-105 tagged
 +vlan 113 members linkagg 106 tagged
 +vlan 150 members linkagg 96-99 tagged
 +
 +! Spanning Tree:
 +spantree vlan 1 admin-state enable 
 +spantree vlan 100 admin-state enable 
 +spantree vlan 102 admin-state enable 
 +spantree vlan 103 admin-state enable 
 +spantree vlan 104 admin-state enable 
 +spantree vlan 106 admin-state enable 
 +spantree vlan 110 admin-state enable 
 +spantree vlan 111 admin-state enable 
 +spantree vlan 112 admin-state enable 
 +spantree vlan 113 admin-state enable 
 +spantree vlan 150 admin-state enable 
 +
 +! Bridging:
 +! Port Mirroring:
 +! Port Mapping:
 +! IP:
 +ip service port 21 admin-state enable
 +ip service port 22 admin-state enable
 +ip service port 23 admin-state enable
 +ip service port 80 admin-state enable
 +ip service port 123 admin-state enable
 +ip service port 443 admin-state enable
 +ip interface "Mgmt" address 192.168.130.197 mask 255.255.255.0 vlan 1 no forward ifindex 1
 +ip interface "Client1" address 10.2.140.1 mask 255.255.255.0 vlan 110 ifindex 2
 +ip interface "Client2" address 10.2.141.1 mask 255.255.255.0 vlan 111 ifindex 3
 +ip interface "Client3" address 10.2.142.1 mask 255.255.255.0 vlan 112 ifindex 4
 +ip interface "Client4" address 10.2.143.1 mask 255.255.255.0 vlan 113 ifindex 5
 +ip interface "Server" address 10.2.128.1 mask 255.255.255.0 vlan 100 ifindex 6
 +ip interface "Transfer_Firewall" address 192.168.150.1 mask 255.255.255.0 vlan 150 ifindex 7
 +
 +! IPv6:
 +! IPSec:
 +! IPMS:
 +! AAA:
 +aaa authentication console "local" 
 +aaa authentication ftp "local" 
 +aaa authentication http "local" 
 +aaa authentication snmp "local" 
 +aaa authentication ssh "local" 
 +
 +user password-size min 6
 +
 +! NTP:
 +ntp server 192.168.2.253
 +ntp client admin-state enable
 +
 +! QOS:
 +policy condition from_voip source vlan 103 
 +policy action set_dscp dscp 46 
 +policy rule prio_voip condition from_voip action set_dscp 
 +qos apply
 +
 +! Policy Manager:
 +! VLAN Stacking:
 +! ERP:
 +! MVRP:
 +! LLDP:
 +lldp nearest-bridge port 1/1/1-20 tlv management system-capabilities enable
 +lldp nearest-bridge port 1/1/1-20 tlv management system-description enable
 +lldp nearest-bridge port 1/1/1-20 tlv management system-name enable
 +lldp nearest-bridge port 1/1/1-20 tlv management port-description enable
 +lldp non-tpmr port 1/1/1-20 tlv management system-capabilities enable
 +lldp non-tpmr port 1/1/1-20 tlv management system-description enable
 +lldp non-tpmr port 1/1/1-20 tlv management system-name enable
 +lldp non-tpmr port 1/1/1-20 tlv management port-description enable
 +lldp nearest-customer port 1/1/1-20 tlv management system-capabilities enable
 +lldp nearest-customer port 1/1/1-20 tlv management system-description enable
 +lldp nearest-customer port 1/1/1-20 tlv management system-name enable
 +lldp nearest-customer port 1/1/1-20 tlv management port-description enable
 +lldp nearest-bridge port 1/1/1-20 tlv management management-address enable
 +lldp non-tpmr port 1/1/1-20 tlv management management-address enable
 +lldp nearest-customer port 1/1/1-20 tlv management management-address enable
 +
 +! UDLD:
 +! Server Load Balance:
 +! High Availability Vlan:
 +! Session Manager:
 +session cli timeout 30
 +session http timeout 30
 +session prompt default "CORE01 ->"
 +command-log enable
 +
 +! Web:
 +! Trap Manager:
 +snmp station 192.168.2.203 162 "snmpv3" v3 enable
 +
 +! Health Monitor:
 +! System Service:
 +swlog output socket 192.168.2.203
 +system timezone CET
 +
 +! SNMP:
 +snmp security authentication set
 +snmp community-map mode enable
 +snmp community-map "public" user "snmp" enable
 +
 +! BFD:
 +! IP Route Manager:
 +ip static-route 0.0.0.0/0 gateway 192.168.150.253 metric 1
 +
 +! VRRP:
 +! UDP Relay:
 +! RIP:
 +! OSPF:
 +! ISIS:
 +! IP Multicast:
 +! DVMRP:
 +! IPMR:
 +! RIPng:
 +! OSPF3:
 +! BGP:
 +! Netsec:
 +! Module:
 +! RDP:
 +! DA-UNP:
 +! DHL:
 +! Ethernet-OAM:
 +! SAA:
 +! SPB-ISIS:
 +! SVCMGR:
 +! LDP:
 +! EVB:
 +</file>
 +
 +==== MC-LAG Knoten 2 (CORE02) ====
 +
 +<file cfg CORE02.cfg>
 +!========================================!
 +! File: /flash/working/boot.cfg          !
 +!========================================!
 +! Chassis:
 +system name MC-Lag2
 +system contact myContact
 +system location "1. DC"
 +mac-retention admin-state enable
 +mac-retention dup-mac-trap admin-state enable
 +mac-retention timer 30
 +
 +! Configuration:
 +
 +! Capability Manager:
 +! Multi-Chassis:
 +multi-chassis chassis-id 2
 +multi-chassis vf-link create
 +multi-chassis vf-link member-port 1/1
 +multi-chassis vf-link member-port 1/20
 +multi-chassis chassis-group 9
 +
 +! Virtual Chassis Manager:
 +! Virtual Flow Control:
 +! Interface:
 +! Link Aggregate:
 +linkagg range local 48-95 peer 0-47 multi-chassis 96-127 
 +linkagg lacp agg 96 size 2 admin-state enable multi-chassis active
 +linkagg lacp agg 96 name "RACK01"
 +linkagg lacp agg 96 actor system-id 00:00:00:00:00:96
 +linkagg lacp agg 96 actor admin-key 96
 +linkagg lacp agg 97 size 2 admin-state enable multi-chassis active
 +linkagg lacp agg 97 name "RACK02"
 +linkagg lacp agg 97 actor system-id 00:00:00:00:00:97
 +linkagg lacp agg 97 actor admin-key 97
 +linkagg lacp agg 98 size 2 admin-state enable multi-chassis active
 +linkagg lacp agg 98 name "RACK03"
 +linkagg lacp agg 98 actor system-id 00:00:00:00:00:98
 +linkagg lacp agg 98 actor admin-key 98
 +linkagg lacp agg 99 size 2 admin-state enable multi-chassis active
 +linkagg lacp agg 99 name "RACK04"
 +linkagg lacp agg 99 actor system-id 00:00:00:00:00:99
 +linkagg lacp agg 99 actor admin-key 99
 +linkagg lacp agg 100 size 2 admin-state enable multi-chassis active
 +linkagg lacp agg 100 name "SW01"
 +linkagg lacp agg 100 actor system-id 00:00:00:00:01:00
 +linkagg lacp agg 100 actor admin-key 100
 +linkagg lacp agg 101 size 2 admin-state enable multi-chassis active
 +linkagg lacp agg 101 name "SW02"
 +linkagg lacp agg 101 actor system-id 00:00:00:00:01:01
 +linkagg lacp agg 101 actor admin-key 101
 +linkagg lacp agg 102 size 2 admin-state enable multi-chassis active
 +linkagg lacp agg 102 name "SW03"
 +linkagg lacp agg 102 actor system-id 00:00:00:00:01:02
 +linkagg lacp agg 102 actor admin-key 102
 +linkagg lacp agg 103 size 2 admin-state enable multi-chassis active
 +linkagg lacp agg 103 name "SW04"
 +linkagg lacp agg 103 actor system-id 00:00:00:00:01:03
 +linkagg lacp agg 103 actor admin-key 103
 +linkagg lacp agg 104 size 2 admin-state enable multi-chassis active
 +linkagg lacp agg 104 name "SW05"
 +linkagg lacp agg 104 actor system-id 00:00:00:00:01:04
 +linkagg lacp agg 104 actor admin-key 104
 +linkagg lacp agg 105 size 2 admin-state enable multi-chassis active
 +linkagg lacp agg 105 name "SW06"
 +linkagg lacp agg 105 actor system-id 00:00:00:00:01:05
 +linkagg lacp agg 105 actor admin-key 105
 +linkagg lacp agg 106 size 2 admin-state enable multi-chassis active
 +linkagg lacp agg 106 name "SW07"
 +linkagg lacp agg 106 actor system-id 00:00:00:00:01:06
 +linkagg lacp agg 106 actor admin-key 106
 +linkagg lacp port 1/2 actor admin-key 96
 +linkagg lacp port 1/2 actor system-id 00:00:00:00:00:96
 +linkagg lacp port 1/3 actor admin-key 97
 +linkagg lacp port 1/3 actor system-id 00:00:00:00:00:97
 +linkagg lacp port 1/4 actor admin-key 98
 +linkagg lacp port 1/4 actor system-id 00:00:00:00:00:98
 +linkagg lacp port 1/5 actor admin-key 99
 +linkagg lacp port 1/5 actor system-id 00:00:00:00:00:99
 +linkagg lacp port 1/6 actor admin-key 100
 +linkagg lacp port 1/6 actor system-id 00:00:00:00:01:00
 +linkagg lacp port 1/7 actor admin-key 101
 +linkagg lacp port 1/7 actor system-id 00:00:00:00:01:01
 +linkagg lacp port 1/8 actor admin-key 102
 +linkagg lacp port 1/8 actor system-id 00:00:00:00:01:02
 +linkagg lacp port 1/9 actor admin-key 103
 +linkagg lacp port 1/9 actor system-id 00:00:00:00:01:03
 +linkagg lacp port 1/10 actor admin-key 104
 +linkagg lacp port 1/10 actor system-id 00:00:00:00:01:04
 +linkagg lacp port 1/11 actor admin-key 105
 +linkagg lacp port 1/11 actor system-id 00:00:00:00:01:05
 +linkagg lacp port 1/12 actor admin-key 106
 +linkagg lacp port 1/12 actor system-id 00:00:00:00:01:06
 +
 +! VLAN:
 +vlan 1 admin-state enable
 +vlan 1 name "Mgmt"
 +multi-chassis vip-vlan 100 admin-state enable
 +multi-chassis vip-vlan 100 name "Server"
 +vlan 102-104 admin-state enable
 +vlan 102 name "Guest"
 +vlan 103 name "VoIP"
 +vlan 104 name "Build"
 +vlan 106 admin-state enable
 +vlan 106 name "Dev"
 +multi-chassis vip-vlan 110-113 admin-state enable
 +multi-chassis vip-vlan 110 name "Client1"
 +multi-chassis vip-vlan 111 name "Client2"
 +multi-chassis vip-vlan 112 name "Client3"
 +multi-chassis vip-vlan 113 name "Client4"
 +multi-chassis vip-vlan 150 admin-state enable
 +multi-chassis vip-vlan 150 name "VIP VLAN"
 +vlan 100 members linkagg 96-99 tagged
 +vlan 102 members linkagg 100-106 tagged
 +vlan 103 members linkagg 96-106 tagged
 +vlan 104 members linkagg 96-106 tagged
 +vlan 106 members linkagg 96-106 tagged
 +vlan 110 members linkagg 100-101 tagged
 +vlan 111 members linkagg 102-103 tagged
 +vlan 112 members linkagg 104-105 tagged
 +vlan 113 members linkagg 106 tagged
 +vlan 150 members linkagg 96-99 tagged
 +
 +! Spanning Tree:
 +spantree vlan 1 admin-state enable 
 +spantree vlan 100 admin-state enable 
 +spantree vlan 102 admin-state enable 
 +spantree vlan 103 admin-state enable 
 +spantree vlan 104 admin-state enable 
 +spantree vlan 106 admin-state enable 
 +spantree vlan 110 admin-state enable 
 +spantree vlan 111 admin-state enable 
 +spantree vlan 112 admin-state enable 
 +spantree vlan 113 admin-state enable 
 +spantree vlan 150 admin-state enable 
 +
 +! Bridging:
 +! Port Mirroring:
 +! Port Mapping:
 +! IP:
 +ip service port 21 admin-state enable
 +ip service port 22 admin-state enable
 +ip service port 23 admin-state enable
 +ip service port 80 admin-state enable
 +ip service port 123 admin-state enable
 +ip service port 443 admin-state enable
 +ip interface "Mgmt" address 192.168.130.198 mask 255.255.255.0 vlan 1 no forward ifindex 1
 +ip interface "Client1" address 10.2.140.198 mask 255.255.255.0 vip-address 10.2.140.1 vlan 110 ifindex 2
 +ip interface "Client2" address 10.2.141.198 mask 255.255.255.0 vip-address 10.2.141.1 vlan 111 ifindex 3
 +ip interface "Client3" address 10.2.142.198 mask 255.255.255.0 vip-address 10.2.142.1 vlan 112 ifindex 4
 +ip interface "Client4" address 10.2.143.198 mask 255.255.255.0 vip-address 10.2.143.1 vlan 113 ifindex 5
 +ip interface "Server" address 10.2.128.198 mask 255.255.255.0 vip-address 10.2.128.1 vlan 100 ifindex 6
 +ip interface "Transfer_Firewall" address 192.168.150.198 mask 255.255.255.0 vip-address 192.168.150.1 vlan 150 ifindex 7
 +
 +! IPv6:
 +! IPSec:
 +! IPMS:
 +! AAA:
 +aaa authentication console "local" 
 +aaa authentication ftp "local" 
 +aaa authentication http "local" 
 +aaa authentication snmp "local" 
 +aaa authentication ssh "local" 
 +
 +user password-size min 6
 +
 +! NTP:
 +ntp server 192.168.2.253
 +ntp client admin-state enable
 +
 +! QOS:
 +policy condition from_voip source vlan 103 
 +policy action set_dscp dscp 46 
 +policy rule prio_voip condition from_voip action set_dscp 
 +qos apply
 +
 +! Policy Manager:
 +! VLAN Stacking:
 +! ERP:
 +! MVRP:
 +! LLDP:
 +lldp nearest-bridge port 1/1-20 tlv management system-capabilities enable
 +lldp nearest-bridge port 1/1-20 tlv management system-description enable
 +lldp nearest-bridge port 1/1-20 tlv management system-name enable
 +lldp nearest-bridge port 1/1-20 tlv management port-description enable
 +lldp non-tpmr port 1/1-20 tlv management system-capabilities enable
 +lldp non-tpmr port 1/1-20 tlv management system-description enable
 +lldp non-tpmr port 1/1-20 tlv management system-name enable
 +lldp non-tpmr port 1/1-20 tlv management port-description enable
 +lldp nearest-customer port 1/1-20 tlv management system-capabilities enable
 +lldp nearest-customer port 1/1-20 tlv management system-description enable
 +lldp nearest-customer port 1/1-20 tlv management system-name enable
 +lldp nearest-customer port 1/1-20 tlv management port-description enable
 +lldp nearest-bridge port 1/1-20 tlv management management-address enable
 +lldp non-tpmr port 1/1-20 tlv management management-address enable
 +lldp nearest-customer port 1/1-20 tlv management management-address enable
 +
 +! UDLD:
 +! Server Load Balance:
 +! High Availability Vlan:
 +! Session Manager:
 +session cli timeout 30
 +session http timeout 30
 +session prompt default "CORE02 ->"
 +command-log enable
 +
 +! Web:
 +! Trap Manager:
 +snmp station 192.168.2.203 162 "snmpv3" v3 enable
 +
 +! Health Monitor:
 +! System Service:
 +swlog output socket 192.168.2.203
 +system timezone CET
 +
 +! SNMP:
 +snmp security authentication set
 +snmp community-map mode enable
 +snmp community-map "public" user "snmp" enable
 +
 +! BFD:
 +! IP Route Manager:
 +ip static-route 0.0.0.0/0 gateway 192.168.150.253 metric 1
 +
 +! VRRP:
 +! UDP Relay:
 +! RIP:
 +! OSPF:
 +! ISIS:
 +! IP Multicast:
 +! DVMRP:
 +! IPMR:
 +! RIPng:
 +! OSPF3:
 +! BGP:
 +! Netsec:
 +! Module:
 +! RDP:
 +! DA-UNP:
 +! DHL:
 +! Ethernet-OAM:
 +! SAA:
 +! SPB-ISIS:
 +! SVCMGR:
 +! LDP:
 +! EVB:
 +</file>
 +
 +==== Modifizierte Konfiguration MC-LAG Knoten 2 (CORE02) ====
 +
 +<file cfg modifiziert-CORE02.cfg>
 +!========================================!
 +! File: /flash/working/boot.cfg          !
 +!========================================!
 +! Chassis:
 +mac-retention admin-state enable
 +mac-retention dup-mac-trap admin-state enable
 +mac-retention timer 30
 +
 +! Configuration:
 +
 +! Capability Manager:
 +! Multi-Chassis:
 +
 +! Virtual Chassis Manager:
 +! Virtual Flow Control:
 +! Interface:
 +! Link Aggregate:
 +linkagg lacp agg 96 size 2 admin-state enable
 +linkagg lacp agg 96 name "RACK01"
 +linkagg lacp agg 96 actor admin-key 96
 +linkagg lacp agg 97 size 2 admin-state enable
 +linkagg lacp agg 97 name "RACK02"
 +linkagg lacp agg 97 actor admin-key 97
 +linkagg lacp agg 98 size 2 admin-state enable
 +linkagg lacp agg 98 name "RACK03"
 +linkagg lacp agg 98 actor admin-key 98
 +linkagg lacp agg 99 size 2 admin-state enable
 +linkagg lacp agg 99 name "RACK04"
 +linkagg lacp agg 99 actor admin-key 99
 +linkagg lacp agg 100 size 2 admin-state enable
 +linkagg lacp agg 100 name "SW01"
 +linkagg lacp agg 100 actor admin-key 100
 +linkagg lacp agg 101 size 2 admin-state enable
 +linkagg lacp agg 101 name "SW02"
 +linkagg lacp agg 101 actor admin-key 101
 +linkagg lacp agg 102 size 2 admin-state enable
 +linkagg lacp agg 102 name "SW03"
 +linkagg lacp agg 102 actor admin-key 102
 +linkagg lacp agg 103 size 2 admin-state enable
 +linkagg lacp agg 103 name "SW04"
 +linkagg lacp agg 103 actor admin-key 103
 +linkagg lacp agg 104 size 2 admin-state enable
 +linkagg lacp agg 104 name "SW05"
 +linkagg lacp agg 104 actor admin-key 104
 +linkagg lacp agg 105 size 2 admin-state enable
 +linkagg lacp agg 105 name "SW06"
 +linkagg lacp agg 105 actor admin-key 105
 +linkagg lacp agg 106 size 2 admin-state enable
 +linkagg lacp agg 106 name "SW07"
 +linkagg lacp agg 106 actor admin-key 106
 +linkagg lacp port 2/1/2 actor admin-key 96
 +linkagg lacp port 2/1/3 actor admin-key 97
 +linkagg lacp port 2/1/4 actor admin-key 98
 +linkagg lacp port 2/1/5 actor admin-key 99
 +linkagg lacp port 2/1/6 actor admin-key 100
 +linkagg lacp port 2/1/7 actor admin-key 101
 +linkagg lacp port 2/1/8 actor admin-key 102
 +linkagg lacp port 2/1/9 actor admin-key 103
 +linkagg lacp port 2/1/10 actor admin-key 104
 +linkagg lacp port 2/1/11 actor admin-key 105
 +linkagg lacp port 2/1/12 actor admin-key 106
 +
 +! VLAN:
 +vlan 1 admin-state enable
 +vlan 1 name "Mgmt"
 +vlan 100 admin-state enable
 +vlan 100 name "Server"
 +vlan 102-104 admin-state enable
 +vlan 102 name "Guest"
 +vlan 103 name "VoIP"
 +vlan 104 name "Build"
 +vlan 106 admin-state enable
 +vlan 106 name "Dev"
 +vlan 110-113 admin-state enable
 +vlan 110 name "Client1"
 +vlan 111 name "Client2"
 +vlan 112 name "Client3"
 +vlan 113 name "Client4"
 +vlan 150 admin-state enable
 +vlan 150 name "VIP VLAN"
 +vlan 100 members linkagg 96-99 tagged
 +vlan 102 members linkagg 100-106 tagged
 +vlan 103 members linkagg 96-106 tagged
 +vlan 104 members linkagg 96-106 tagged
 +vlan 106 members linkagg 96-106 tagged
 +vlan 110 members linkagg 100-101 tagged
 +vlan 111 members linkagg 102-103 tagged
 +vlan 112 members linkagg 104-105 tagged
 +vlan 113 members linkagg 106 tagged
 +vlan 150 members linkagg 96-99 tagged
 +
 +! Spanning Tree:
 +spantree vlan 1 admin-state enable 
 +spantree vlan 100 admin-state enable 
 +spantree vlan 102 admin-state enable 
 +spantree vlan 103 admin-state enable 
 +spantree vlan 104 admin-state enable 
 +spantree vlan 106 admin-state enable 
 +spantree vlan 110 admin-state enable 
 +spantree vlan 111 admin-state enable 
 +spantree vlan 112 admin-state enable 
 +spantree vlan 113 admin-state enable 
 +spantree vlan 150 admin-state enable 
 +
 +! Bridging:
 +! Port Mirroring:
 +! Port Mapping:
 +! IP:
 +ip service port 21 admin-state enable
 +ip service port 22 admin-state enable
 +ip service port 23 admin-state enable
 +ip service port 80 admin-state enable
 +ip service port 123 admin-state enable
 +ip service port 443 admin-state enable
 +
 +! IPv6:
 +! IPSec:
 +! IPMS:
 +! AAA:
 +aaa authentication console "local" 
 +aaa authentication ftp "local" 
 +aaa authentication http "local" 
 +aaa authentication snmp "local" 
 +aaa authentication ssh "local" 
 +
 +user password-size min 6
 +
 +! NTP:
 +ntp server 192.168.2.253
 +ntp client admin-state enable
 +
 +! QOS:
 +policy condition from_voip source vlan 103 
 +policy action set_dscp dscp 46 
 +policy rule prio_voip condition from_voip action set_dscp 
 +qos apply
 +
 +! Policy Manager:
 +! VLAN Stacking:
 +! ERP:
 +! MVRP:
 +! LLDP:
 +lldp nearest-bridge port 2/1/1-20 tlv management system-capabilities enable
 +lldp nearest-bridge port 2/1/1-20 tlv management system-description enable
 +lldp nearest-bridge port 2/1/1-20 tlv management system-name enable
 +lldp nearest-bridge port 2/1/1-20 tlv management port-description enable
 +lldp non-tpmr port 2/1/1-20 tlv management system-capabilities enable
 +lldp non-tpmr port 2/1/1-20 tlv management system-description enable
 +lldp non-tpmr port 2/1/1-20 tlv management system-name enable
 +lldp non-tpmr port 2/1/1-20 tlv management port-description enable
 +lldp nearest-customer port 2/1/1-20 tlv management system-capabilities enable
 +lldp nearest-customer port 2/1/1-20 tlv management system-description enable
 +lldp nearest-customer port 2/1/1-20 tlv management system-name enable
 +lldp nearest-customer port 2/1/1-20 tlv management port-description enable
 +lldp nearest-bridge port 2/1/1-20 tlv management management-address enable
 +lldp non-tpmr port 2/1/1-20 tlv management management-address enable
 +lldp nearest-customer port 2/1/1-20 tlv management management-address enable
 +
 +! UDLD:
 +! Server Load Balance:
 +! High Availability Vlan:
 +! Session Manager:
 +session cli timeout 30
 +session http timeout 30
 +command-log enable
 +
 +! Web:
 +! Trap Manager:
 +snmp station 192.168.2.203 162 "snmpv3" v3 enable
 +
 +! Health Monitor:
 +! System Service:
 +swlog output socket 192.168.2.203
 +system timezone CET
 +
 +! SNMP:
 +snmp security authentication set
 +snmp community-map mode enable
 +snmp community-map "public" user "snmp" enable
 +
 +! BFD:
 +! IP Route Manager:
 +ip static-route 0.0.0.0/0 gateway 192.168.150.253 metric 1
 +
 +! VRRP:
 +! UDP Relay:
 +! RIP:
 +! OSPF:
 +! ISIS:
 +! IP Multicast:
 +! DVMRP:
 +! IPMR:
 +! RIPng:
 +! OSPF3:
 +! BGP:
 +! Netsec:
 +! Module:
 +! RDP:
 +! DA-UNP:
 +! DHL:
 +! Ethernet-OAM:
 +! SAA:
 +! SPB-ISIS:
 +! SVCMGR:
 +! LDP:
 +! EVB:
 +</file>
 +
 +==== Finale Zielkonfiguration (VC-CORE01, vcboot.cfg) ====
 +
 +<file cfg vcboot.cfg>
 +!========================================!
 +! File: /flash/working/boot.cfg          !
 +!========================================!
 +! Chassis:
 +system name MC-Lag1
 +system contact myContact
 +system location "1. DC"
 +mac-retention admin-state enable
 +mac-retention dup-mac-trap admin-state enable
 +mac-retention timer 30
 +
 +! Configuration:
 +
 +! Capability Manager:
 +! Multi-Chassis:
 +
 +! Virtual Chassis Manager:
 +! Virtual Flow Control:
 +! Interface:
 +! Link Aggregate:
 +linkagg lacp agg 96 size 2 admin-state enable
 +linkagg lacp agg 96 name "RACK01"
 +linkagg lacp agg 96 actor admin-key 96
 +linkagg lacp agg 97 size 2 admin-state enable
 +linkagg lacp agg 97 name "RACK02"
 +linkagg lacp agg 97 actor admin-key 97
 +linkagg lacp agg 98 size 2 admin-state enable
 +linkagg lacp agg 98 name "RACK03"
 +linkagg lacp agg 98 actor admin-key 98
 +linkagg lacp agg 99 size 2 admin-state enable
 +linkagg lacp agg 99 name "RACK04"
 +linkagg lacp agg 99 actor admin-key 99
 +linkagg lacp agg 100 size 2 admin-state enable
 +linkagg lacp agg 100 name "SW01"
 +linkagg lacp agg 100 actor admin-key 100
 +linkagg lacp agg 101 size 2 admin-state enable
 +linkagg lacp agg 101 name "SW02"
 +linkagg lacp agg 101 actor admin-key 101
 +linkagg lacp agg 102 size 2 admin-state enable
 +linkagg lacp agg 102 name "SW03"
 +linkagg lacp agg 102 actor admin-key 102
 +linkagg lacp agg 103 size 2 admin-state enable
 +linkagg lacp agg 103 name "SW04"
 +linkagg lacp agg 103 actor admin-key 103
 +linkagg lacp agg 104 size 2 admin-state enable
 +linkagg lacp agg 104 name "SW05"
 +linkagg lacp agg 104 actor admin-key 104
 +linkagg lacp agg 105 size 2 admin-state enable
 +linkagg lacp agg 105 name "SW06"
 +linkagg lacp agg 105 actor admin-key 105
 +linkagg lacp agg 106 size 2 admin-state enable
 +linkagg lacp agg 106 name "SW07"
 +linkagg lacp agg 106 actor admin-key 106
 +linkagg lacp port 1/1/2 actor admin-key 96
 +linkagg lacp port 1/1/3 actor admin-key 97
 +linkagg lacp port 1/1/4 actor admin-key 98
 +linkagg lacp port 1/1/5 actor admin-key 99
 +linkagg lacp port 1/1/6 actor admin-key 100
 +linkagg lacp port 1/1/7 actor admin-key 101
 +linkagg lacp port 1/1/8 actor admin-key 102
 +linkagg lacp port 1/1/9 actor admin-key 103
 +linkagg lacp port 1/1/10 actor admin-key 104
 +linkagg lacp port 1/1/11 actor admin-key 105
 +linkagg lacp port 1/1/12 actor admin-key 106
 +linkagg lacp port 2/1/2 actor admin-key 96
 +linkagg lacp port 2/1/3 actor admin-key 97
 +linkagg lacp port 2/1/4 actor admin-key 98
 +linkagg lacp port 2/1/5 actor admin-key 99
 +linkagg lacp port 2/1/6 actor admin-key 100
 +linkagg lacp port 2/1/7 actor admin-key 101
 +linkagg lacp port 2/1/8 actor admin-key 102
 +linkagg lacp port 2/1/9 actor admin-key 103
 +linkagg lacp port 2/1/10 actor admin-key 104
 +linkagg lacp port 2/1/11 actor admin-key 105
 +linkagg lacp port 2/1/12 actor admin-key 106
 +
 +! VLAN:
 +vlan 1 admin-state enable
 +vlan 1 name "Mgmt"
 +vlan 100 admin-state enable
 +vlan 100 name "Server"
 +vlan 102-104 admin-state enable
 +vlan 102 name "Guest"
 +vlan 103 name "VoIP"
 +vlan 104 name "Build"
 +vlan 106 admin-state enable
 +vlan 106 name "Dev"
 +vlan 110-113 admin-state enable
 +vlan 110 name "Client1"
 +vlan 111 name "Client2"
 +vlan 112 name "Client3"
 +vlan 113 name "Client4"
 +vlan 150 admin-state enable
 +vlan 150 name "VIP VLAN"
 +vlan 100 members linkagg 96-99 tagged
 +vlan 102 members linkagg 100-106 tagged
 +vlan 103 members linkagg 96-106 tagged
 +vlan 104 members linkagg 96-106 tagged
 +vlan 106 members linkagg 96-106 tagged
 +vlan 110 members linkagg 100-101 tagged
 +vlan 111 members linkagg 102-103 tagged
 +vlan 112 members linkagg 104-105 tagged
 +vlan 113 members linkagg 106 tagged
 +vlan 150 members linkagg 96-99 tagged
 +
 +! Spanning Tree:
 +spantree vlan 1 admin-state enable 
 +spantree vlan 100 admin-state enable 
 +spantree vlan 102 admin-state enable 
 +spantree vlan 103 admin-state enable 
 +spantree vlan 104 admin-state enable 
 +spantree vlan 106 admin-state enable 
 +spantree vlan 110 admin-state enable 
 +spantree vlan 111 admin-state enable 
 +spantree vlan 112 admin-state enable 
 +spantree vlan 113 admin-state enable 
 +spantree vlan 150 admin-state enable 
 +
 +! Bridging:
 +! Port Mirroring:
 +! Port Mapping:
 +! IP:
 +ip service port 21 admin-state enable
 +ip service port 22 admin-state enable
 +ip service port 23 admin-state enable
 +ip service port 80 admin-state enable
 +ip service port 123 admin-state enable
 +ip service port 443 admin-state enable
 +ip interface "Mgmt" address 192.168.130.197 mask 255.255.255.0 vlan 1 no forward ifindex 1
 +ip interface "Client1" address 10.2.140.1 mask 255.255.255.0 vlan 110 ifindex 2
 +ip interface "Client2" address 10.2.141.1 mask 255.255.255.0 vlan 111 ifindex 3
 +ip interface "Client3" address 10.2.142.1 mask 255.255.255.0 vlan 112 ifindex 4
 +ip interface "Client4" address 10.2.143.1 mask 255.255.255.0 vlan 113 ifindex 5
 +ip interface "Server" address 10.2.128.1 mask 255.255.255.0 vlan 100 ifindex 6
 +ip interface "Transfer_Firewall" address 192.168.150.1 mask 255.255.255.0 vlan 150 ifindex 7
 +
 +! IPv6:
 +! IPSec:
 +! IPMS:
 +! AAA:
 +aaa authentication console "local" 
 +aaa authentication ftp "local" 
 +aaa authentication http "local" 
 +aaa authentication snmp "local" 
 +aaa authentication ssh "local" 
 +
 +user password-size min 6
 +
 +! NTP:
 +ntp server 192.168.2.253
 +ntp client admin-state enable
 +
 +! QOS:
 +policy condition from_voip source vlan 103 
 +policy action set_dscp dscp 46 
 +policy rule prio_voip condition from_voip action set_dscp 
 +qos apply
 +
 +! Policy Manager:
 +! VLAN Stacking:
 +! ERP:
 +! MVRP:
 +! LLDP:
 +lldp nearest-bridge port 1/1/1-20 tlv management system-capabilities enable
 +lldp nearest-bridge port 1/1/1-20 tlv management system-description enable
 +lldp nearest-bridge port 1/1/1-20 tlv management system-name enable
 +lldp nearest-bridge port 1/1/1-20 tlv management port-description enable
 +lldp non-tpmr port 1/1/1-20 tlv management system-capabilities enable
 +lldp non-tpmr port 1/1/1-20 tlv management system-description enable
 +lldp non-tpmr port 1/1/1-20 tlv management system-name enable
 +lldp non-tpmr port 1/1/1-20 tlv management port-description enable
 +lldp nearest-customer port 1/1/1-20 tlv management system-capabilities enable
 +lldp nearest-customer port 1/1/1-20 tlv management system-description enable
 +lldp nearest-customer port 1/1/1-20 tlv management system-name enable
 +lldp nearest-customer port 1/1/1-20 tlv management port-description enable
 +lldp nearest-bridge port 1/1/1-20 tlv management management-address enable
 +lldp non-tpmr port 1/1/1-20 tlv management management-address enable
 +lldp nearest-customer port 1/1/1-20 tlv management management-address enable
 +lldp nearest-bridge port 2/1/1-20 tlv management system-capabilities enable
 +lldp nearest-bridge port 2/1/1-20 tlv management system-description enable
 +lldp nearest-bridge port 2/1/1-20 tlv management system-name enable
 +lldp nearest-bridge port 2/1/1-20 tlv management port-description enable
 +lldp non-tpmr port 2/1/1-20 tlv management system-capabilities enable
 +lldp non-tpmr port 2/1/1-20 tlv management system-description enable
 +lldp non-tpmr port 2/1/1-20 tlv management system-name enable
 +lldp non-tpmr port 2/1/1-20 tlv management port-description enable
 +lldp nearest-customer port 2/1/1-20 tlv management system-capabilities enable
 +lldp nearest-customer port 2/1/1-20 tlv management system-description enable
 +lldp nearest-customer port 2/1/1-20 tlv management system-name enable
 +lldp nearest-customer port 2/1/1-20 tlv management port-description enable
 +lldp nearest-bridge port 2/1/1-20 tlv management management-address enable
 +lldp non-tpmr port 2/1/1-20 tlv management management-address enable
 +lldp nearest-customer port 2/1/1-20 tlv management management-address enable
 +
 +! UDLD:
 +! Server Load Balance:
 +! High Availability Vlan:
 +! Session Manager:
 +session cli timeout 30
 +session http timeout 30
 +session prompt default "CORE01 ->"
 +command-log enable
 +
 +! Web:
 +! Trap Manager:
 +snmp station 192.168.2.203 162 "snmpv3" v3 enable
 +
 +! Health Monitor:
 +! System Service:
 +swlog output socket 192.168.2.203
 +system timezone CET
 +
 +! SNMP:
 +snmp security authentication set
 +snmp community-map mode enable
 +snmp community-map "public" user "snmp" enable
 +
 +! BFD:
 +! IP Route Manager:
 +ip static-route 0.0.0.0/0 gateway 192.168.150.253 metric 1
 +
 +! VRRP:
 +! UDP Relay:
 +! RIP:
 +! OSPF:
 +! ISIS:
 +! IP Multicast:
 +! DVMRP:
 +! IPMR:
 +! RIPng:
 +! OSPF3:
 +! BGP:
 +! Netsec:
 +! Module:
 +! RDP:
 +! DA-UNP:
 +! DHL:
 +! Ethernet-OAM:
 +! SAA:
 +! SPB-ISIS:
 +! SVCMGR:
 +! LDP:
 +! EVB:
 +</file>
 +
 +===== Durchführung der MC-LAG zu Virtual-Chassis Migration =====
 +
 +==== Vorbereiten von CORE01 ====
 +
 +**Anlegen eines Verzeichnisses für Virtual-Chassis Betrieb und Erstellung vcsetup.cfg:**
 +
 +<code>
 +CORE01 -> mkdir vc-config
 +CORE01 -> cd vc-config
 +CORE01 -> vi vcsetup.cfg
 +(Datei editieren, nach folgendem Beispiel) 
 +</code>
 +
 +<WRAP center round tip 60%>
 +
 +Dieses Beispiel folgt den bisherigen Einstellungen der VFL-Ports von MC-LAG, was in den meisten Fällen sinnvoll ist.
 +
 +</WRAP>
 +
 +
 +<file cfg vcsetup.cfg>
 +!========================================!
 +! File: /flash/vc-config/vcsetup.cfg     !
 +!========================================!
 +! Virtual Chassis Manager:
 +virtual-chassis chassis-id 1 configured-chassis-id 1
 +virtual-chassis chassis-id 1 vf-link 0 create       
 +virtual-chassis chassis-id 1 vf-link 0 member-port 1/1/1 
 +virtual-chassis chassis-id 1 vf-link 0 member-port 1/1/20
 +virtual-chassis chassis-id 1 chassis-group 9             
 +                                                         
 +! IP:                                                                     
 +ip interface local chassis-id 1 emp address 192.168.1.1 mask 255.255.255.0
 +</file>
 +
 +<WRAP center round important 60%>
 +
 +Wir empfehlen **dringend** den EMP-Port bzw. das Out-of-Band Management zu konfigurieren, dies ist für die Remote-Chassis-Split-Detection zur Vermeidung einer sogenannten "Split-Brain"-Situation notwendig!
 +
 +</WRAP>
 +
 +
 +**Hochladen/Kopieren des AOS-Betriebssystems:**
 +<WRAP center round tip 60%>
 +Laden Sie die vcboot.cfg per FTP in das Verzeichnis vc-config hoch!
 +
 +</WRAP>
 +
 +<code>
 +CORE01 -> 
 +CORE01 -> ls
 +vcboot.cfg   vcsetup.cfg
 +CORE01 -> cp ../732-344-GA/Tos.img .
 +CORE01 -> ls -l
 +-rw-r--r--    1 admin    user     126642216 Aug 16 09:51 Tos.img
 +-rw-------    1 admin    user          8279 Aug 16 09:50 vcboot.cfg
 +-rw-r--r--    1 admin    user           497 Aug 16 09:49 vcsetup.cfg
 +CORE01 -> 
 +</code>
 +
 +==== Vorbereiten von CORE02 ====
 +
 +**Anlegen eines Verzeichnisses für Virtual-Chassis Betrieb und Erstellung vcsetup.cfg:**
 +
 +<code>
 +CORE02 -> mkdir vc-config
 +CORE02 -> cd vc-config
 +CORE02 -> vi vcsetup.cfg
 +(Datei editieren, nach folgendem Beispiel)
 +</code>
 +
 +<WRAP center round info 60%>
 +
 +Dieses Beispiel folgt den bisherigen Einstellungen der VFL-Ports von MC-LAG, was in den meisten Fällen sinnvoll ist.
 +
 +</WRAP>
 +
 +
 +<file cfg vcsetup.cfg>
 +!========================================!
 +! File: /flash/vc-config/vcsetup.cfg     !
 +!========================================!
 +! Virtual Chassis Manager:
 +virtual-chassis chassis-id 2 configured-chassis-id 2
 +virtual-chassis chassis-id 2 vf-link 0 create
 +virtual-chassis chassis-id 2 vf-link 0 member-port 2/1/1
 +virtual-chassis chassis-id 2 vf-link 0 member-port 2/1/20
 +virtual-chassis chassis-id 2 chassis-group 9
 +
 +! IP:
 +ip interface local chassis-id 2 emp address 192.168.1.2 mask 255.255.255.0
 +</file>
 +
 +<WRAP center round important 60%>
 +
 +Wir empfehlen **dringend** den EMP-Port bzw. das Out-of-Band Management zu konfigurieren, dies ist für die Remote-Chassis-Split-Detection zur Vermeidung einer sogenannten "Split-Brain"-Situation notwendig!
 +
 +</WRAP>
 +
 +
 +**Hochladen/Kopieren des AOS-Betriebssystems:**
 +<WRAP center round tip 60%>
 +
 +Laden Sie die vcboot.cfg per FTP in das Verzeichnis vc-config hoch!
 +
 +</WRAP>
 +
 +<code>
 +CORE02 -> 
 +CORE02 -> ls
 +vcboot.cfg   vcsetup.cfg
 +CORE02 -> cp ../732-344-GA/Tos.img .
 +CORE02 -> ls -l
 +-rw-r--r--    1 admin    user     126642216 Aug 16 09:51 Tos.img
 +-rw-------    1 admin    user          8279 Aug 16 09:50 vcboot.cfg
 +-rw-r--r--    1 admin    user           497 Aug 16 09:49 vcsetup.cfg
 +CORE02 -> 
 +</code>
 +
 +==== Neustart der beiden Geräte ====
 +
 +**Auf CORE01:**
 +<code>
 +CORE01 -> reload from vc-config no rollback-timeout
 +</code>
 +
 +**Auf CORE02:**
 +<code>
 +CORE02 -> reload from vc-config no rollback-timeout
 +</code>
 +
 +==== Relevante Meldungen auf der Konsole ====
 +
 +Wichtig ist **Chassis Supervision: CMM has reached the ready state [L8]**, in diesem Moment ist das Virtual-Chassis in Betrieb und beginnt damit Datenverkehr zu verarbeiten.
 +
 +<code>
 +Fri Aug 16 10:03:44 : vcmCmm chas_sup info message:
 ++++ CMM:vcmCMM_cs_handle_chassis_ready@3602: Chassis 1 ready (data 0) [L1]
 + 
 +Fri Aug 16 10:04:05 : vcmCmm port_mgr info message:
 ++++ CMM:vcmCMM_client_rx_pm@1551: VFL link 1/0 up (pri 1/1/1:0x0) [L2]
 +
 +Fri Aug 16 10:04:05 : vcmCmm protocol info message:
 ++++ CMM:vcmCMN_protocol_ready_update_cb@13348: Chassis 1, role Master, status Running, master 1 [L3]
 +
 +Fri Aug 16 10:04:05 : vcmCmm ipc info message:
 ++++ CMM:vcmCMM_peer_connected@1792: Remote endpoint (chassis 2, slot 65) [L4]
 +
 +Fri Aug 16 10:04:08 : vcmCmm node_sync info message:
 ++++ CMM:notify_sync_complete@757: Sync complete 'multi node' (peers 1, conn 1, sync 1) [L5]
 +
 +Fri Aug 16 10:04:08 : ChassisSupervisor bootMgr info message:
 ++++ Sending VC Takeover to NIs and applications [L6]
 +
 +Fri Aug 16 10:04:08 : isis_spb_0 TASK info message:
 ++++ VC Takeover: chassis_id:1
 +
 +Fri Aug 16 10:04:08 : ipv4 itf info message:
 ++++ Interface EMP-CHAS1 192.168.1.1/255.255.255.0
 +
 +Fri Aug 16 10:04:08 : SNMP aluSubagent_thread info message:
 ++++ snmp_vc_takeover_callback | VC Takeover complete
 +
 +Fri Aug 16 10:04:10 : qosNi Info info message:
 ++++ VC Takeover in progress.
 ++++ VC Takeover complete.
 +
 +Fri Aug 16 10:04:10 : ChassisSupervisor bootMgr info message:
 ++++ Received VC Takeover Complete event from all apps [L7]
 +Chassis Supervision: CMM has reached the ready state [L8]
 +Chassis Supervision: CMM has reached the ready state [L8]
 +
 +Fri Aug 16 10:04:12 : ChassisSupervisor reloadMgr info message:
 ++++ Redundancy time expired - updating next running to vc-config
 +</code>
 +
 +**Diese Zeit ist seit dem Neustart der Geräte bis zur "ready state"-Meldung vergangen:**
 +
 +{{:mclag-migrationszeit.jpg?nolink&300|}}
 +
 +==== Überprüfung der Virtual-Chassis Topologie ====
 +<code>
 +CORE01 -> show virtual-chassis topology 
 +Local Chassis: 1
 +                                        Config 
 + Chas  Role         Status              Chas ID  Pri   Group  MAC-Address      
 +-----+------------+-------------------+--------+-----+------+------------------
 + 1     Master       Running             1        100   9      e8:e7:32:11:ca:ed
 + 2     Slave        Running             2        100   9      e8:e7:32:11:ca:d1
 +
 +</code>
 +
 +==== Abschluss der Migration ====
 +
 +Nachdem wir festgestellt haben dass alles wie gewünscht funktioniert, sollte die laufende Konfiguration gespeichert und zertifiziert werden.
 +<code>
 +CORE01 -> write memory flash-synchro
 +</code>
mc-lag_zu_virtual-chassis_migration.txt · Zuletzt geändert: von benny
Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki